|
|
P0841-LR PRESSURE SWITCH RATIONALITY (CONTINUED) 5. (T50) L/R PRESSURE SWITCH SENSE CIRCUIT OPEN Turn the ignition off to the lock position. Disconnect the PCM C4 harness connector. Disconnect the Transmission Solenoid/Pressure Switch Assembly har- NOTE: Check connectors - Clean/repair as necessary. CAUTION: Do not probe the PCM harness connectors. Probing Is the resistance above 5.0 ohms? Yes >> Repair the (T50) L/R Pressure Switch Sense circuit for an open. Perform 42RLE TRANSMISSION VERIFICATION TEST - No >> Go To 6 6. (T50) L/R PRESSURE SWITCH SENSE CIRCUIT SHORT TO GROUND Measure the resistance between ground and the (T50) L/R Pressure Is the resistance below 5.0 ohms? Yes >> Repair the (T50) L/R Pressure Switch Sense circuit for a short to ground. Perform 42RLE TRANSMISSION VERIFICATION TEST - No >> Go To 7 21 - 164 AUTOMATIC TRANSMISSION 42RLE - ELECTRICAL DIAGNOSTICS ND |