|
|
25. Raise vehicle. 26. Connect crankshaft position sensor (1). 27. Install starter (4) (Refer to 8 - ELECTRICAL/ STARTING/STARTER MOTOR - INSTALLATION). CAUTION: The structural cover requires a specific 28. Install structural cover (Refer to 9 - ENGINE/EN- GINE BLOCK/STRUCTURAL COVER - INSTAL- 29. Install the pinion bracket. 30. Install exhaust crossover pipe. 31. Install engine block heater power cable, If equipped. 32. Check and fill engine oil. 9 - 902 ENGINE - 4.7L SERVICE INFORMATION ND |