|
|
2 Removal and installation COOLING SYSTEM XE ENGINE 5-7 5.5 REMOVAL AND INSTALLATION, HEADER TANK Removing the header tank Remove the front engine encapsulation. 2. Drain the coolant until the header tank is 3. Remove all water hoses between the 4. Slacken the circlips at the front of the 5. Lift the front of the header tank a little. 6. Slacken the circlips at the back of the 7. Remove the header tank. Installing the header tank Install the header tank, pushing it into the 2. Install all water hoses between the header 3. Install the front engine encapsulation. 4. Fill the cooling system, see chapter 5. Run the engine and check that all M200585 6 ǹ 0008 |