|
|
|
STARTING AND DRIVING }} * Option/accessory. 489 Activating and deactivating the compass * An integrated compass 26 in the upper right corner of the rearview mirror shows the The compass is automatically activated when To deactivate/activate the compass manually: – Use a paper clip or similar object to press vehicle is switched off, it will not be Related information • • Calibrating the compass * The globe is divided into 15 magnetic zones. 27 should be calibrated if the vehicle is driven from one zone to another. 1. Stop the vehicle in a large, open area away from steel constructions and high-voltage 2. Start the engine and switch off all electri- cal equipment (climate system, wipers, Calibration may fail or not even be initiated 3. Hold the button on the bottom of the rear- view mirror pressed for about 3 seconds 15 14 13 12 11 9 8 7 6 5 4 3 2 1 10 Magnetic zones. 4. Press the button on the underside of the mirror repeatedly until the desired mag- 1–15 ) appears (see the map of magnetic zones). 5. Wait until the display again shows C , or press and hold the button on the under- C is displayed. 6. Drive slowly in a circle at a speed of no more than 10 km/h (6 mph) until a com- 26 Rearview mirror with compass is available as an option only on certain markets and models. 27 Rearview mirror with compass is available as an option only on certain markets and models. |