Volvo XC60 Recharge Plug-in Hybrid (2021 year). Manual in english - page 16

DRIVER SUPPORT

279

Symbol

Message

Meaning

ESC

Temporarily off

The system's functionality has been temporarily reduced due to high brake system tempera-
tures. The function will be automatically reactivated when the brakes have cooled.

ESC

Service required

The system is not functioning properly. Stop the vehicle in a safe place, turn off the engine
and then restart it.

A text message can be erased by briefly press-
ing the 

 button in the center of the right-

side steering wheel keypad.

If the message persists: Contact a workshop 

‒

an authorized Volvo workshop is recom-
mended.

Related information

•

Electronic Stability Control (p. 275)

DRIVER SUPPORT

* Option/accessory.

280

Connected Safety

10

Connected Safety communicates information
between your vehicle and other vehicles via
the Internet

11

. The function is designed to

notify the driver of any hazardous road condi-
tions ahead.

The function can notify the driver if another
vehicle further down the road has activated its
hazard warning flashers or detected slippery
road conditions. You will also be notified if
your own vehicle detects slippery road condi-
tions.

Connected Safety can assist the driver with
the following:

•

Hazard warning flashers alert

•

Slippery road alerts

Connected Safety communication between
vehicles only works for vehicles that are equip-
ped with the function and have it activated.

Hazard warning flashers alert

If your vehicle's hazard warning flashers are
activated, information on this can be sent to
other vehicles approaching your location.

When your vehicle
approaches a vehicle with its
hazard warning flashers on,
this symbol will appear in the
instrument panel.

In vehicles equipped with a head-up display,
the warning symbols for Connected Safety
will also be displayed there.

Slippery road alerts

If your own car detects reduced friction
between your tires and the road, information
on this can be sent to vehicles approaching
your own car's position.

As the vehicle approaches
the area affected, this symbol
will be displayed in the instru-
ment panel to alert the driver
of slippery road conditions.
Drivers of other vehicles
receiving information via

Connected Safety will receive similar notifica-
tions as they approach the area.

In vehicles equipped with a head-up display,
the warning symbols for Connected Safety
will also be displayed there.

WARNING

•

The function is supplementary driver
support intended to facilitate driving
and help make it safer – it cannot han-
dle all situations in all traffic, weather
and road conditions.

•

•

Driver support functions are not a sub-
stitute for the driver's attention and
judgment. The driver is always respon-
sible for ensuring the vehicle is driven
in a safe manner, at the appropriate
speed, with an appropriate distance to
other vehicles, and in accordance with
current traffic rules and regulations.

Related information

•

Driver support systems (p. 274)

•

Activating or deactivating Connected
Safety (p. 281)

•

Connected Safety limitations (p. 281)

•

Internet-connected vehicle

*

 (p. 538)

10

Not available in all markets.

11

There may be a charge for transmitting data over the Internet, depending on your service plan.

DRIVER SUPPORT

}}

* Option/accessory.

281

Activating or deactivating

Connected Safety

For Connected Safety to be able to share
information about road conditions with other
drivers, the function must be activated. If you
do not wish to share information, the function
can be deactivated.

Activate or deactivate the
function using this button in
the center display's Function
view.

•

Illuminated button indicator light – the
function is activated.

•

Extinguished button indicator light – the
function is deactivated.

At activation, the driver must accept the spe-
cial terms and conditions shown in the display
before an Internet connection

12

 can be estab-

lished. The driver must, for example, accept
that data is sent from the vehicle using the
driver's cellular phone.

Even when your vehicle is not connected to
the Internet, you will still be notified if the sys-
tem in your own vehicle detects slippery road
conditions. For Connected Safety to function
at full capacity, your vehicle needs to be con-
nected to the Internet.

Related information

•

Connected Safety (p. 280)

•

Internet-connected vehicle

*

 (p. 538)

•

Terms of use and data sharing (p. 544)

•

Connected Safety limitations (p. 281)

Connected Safety limitations

Information on vehicles with activated hazard
warning flashers or which have detected slip-
pery road conditions is not always communi-
cated between all vehicles in the affected
area.

This may be the case if:

•

No or insufficient Internet connection.

•

The maneuvers (steering wheel move-
ments, acceleration or braking) made by
the vehicles on slippery surfaces are too
weak for friction between the tires and
road to be detected.

•

Vehicles that have detected slippery road
conditions or activated hazard warning
flashers have not activated the function.

•

Vehicles that have detected slippery road
conditions or activated hazard warning
flashers are not equipped with the func-
tion.

•

Insufficient GPS/satellite navigation may
prevent warnings.

•

Slippery road conditions were detected or
hazard warning flashers were activated on
a road that is not registered in the Volvo
Cars database.

•

Connected Safety is not developed on all
markets and does not cover all areas. Con-

12

There may be a charge for transmitting data over the Internet, depending on your service plan.

||

DRIVER SUPPORT

* Option/accessory.

282

sult a Volvo retailer for more information
on covered areas.

WARNING

•

In certain situations, the function may
give false warnings of slippery road
conditions.

•

The function cannot always detect
other vehicles with activated hazard
warning factors or detect all stretches
of road with slippery conditions.

Related information

•

Connected Safety (p. 280)

•

Internet-connected vehicle

*

 (p. 538)

Road Sign Information

*

The Road Sign Information (RSI

13

) function

can help the driver observe speed-related
road signs.

Examples of signs that can be detected

14

.

If the vehicle passes a speed limit sign, it will
be displayed in the instrument panel and the
head-up display

*

.

There are also subfunctions for Road Sign
Information (RSI

15

) that can alert the driver if

the speed limit has been exceeded or if there
are speed cameras nearby.

NOTE

In certain markets, the Road Sign Informa-
tion

*

 function is only available in combina-

tion with Sensus Navigation

*

.

WARNING

•

The function is supplementary driver
support intended to facilitate driving
and help make it safer – it cannot han-
dle all situations in all traffic, weather
and road conditions.

•

•

Driver support functions are not a sub-
stitute for the driver's attention and
judgment. The driver is always respon-
sible for ensuring the vehicle is driven
in a safe manner, at the appropriate
speed, with an appropriate distance to
other vehicles, and in accordance with
current traffic rules and regulations.

13

Road Sign Information

14

Road signs differ according to market 

‒ 

the illustrations shown here are just some examples.

15

Road Sign Information

DRIVER SUPPORT

}}

* Option/accessory.

283

Related information

•

Driver support systems (p. 274)

•

Activating or deactivating Road Sign Infor-
mation

*

 (p. 283)

•

Road Sign Information

*

 display (p. 283)

•

Road Sign Information and Sensus
Navigation

*

 (p. 284)

•

Speed limit and speed camera warnings
from Road Sign Information

*

 (p. 284)

•

Road Sign Information

*

 limitations

(p. 286)

Activating or deactivating Road

Sign Information

*

The Road Sign Information (RSI

16

) function is

optional – the driver can choose to have the
function activated or deactivated.

Activate or deactivate the
function using this button in
the center display's Function
view.

•

Illuminated button indicator light – the
function is activated.

•

Extinguished button indicator light – the
function is deactivated.

Related information

•

Road Sign Information

*

 (p. 282)

•

Road Sign Information

*

 limitations

(p. 286)

Road Sign Information

*

 display

Road Sign Information (RSI

17

) displays road

signs in different ways depending on the sign
and situation.

Example

18

 of registered speed information.

When the function has registered a speed
limit sign, the sign will be displayed as a sym-
bol in the instrument panel and a colored
marking will be shown in the speedometer's
speed scale.

If the vehicle is equipped with Sensus
Navigation

*

, speed-related information will

also be retrieved from map data, which means
that the instrument panel can display or
change information about speed limits even if
the vehicle has not passed a speed-related
sign.

16

Road Sign Information

17

Road Sign Information

18

Road signs differ according to market 

‒ 

the illustrations shown here are just examples.

||

DRIVER SUPPORT

* Option/accessory.

284

Signs for "School" and "Children
playing"

If the warning sign "School"
or "Children playing" is
included in the satellite navi-
gator's map data

19

, a symbol

of this type will be displayed
in the instrument panel.

Related information

•

Road Sign Information

*

 (p. 282)

•

Road Sign Information

*

 limitations

(p. 286)

Road Sign Information and Sensus

Navigation

*

If the vehicle is equipped with Sensus
Navigation

*

, speed-related information will be

provided in the following situations:

•

In cases where the speed limit is given
indirectly, e.g. signs for highways or other
major roads.

•

If a previously detected speed sign is
deemed to be no longer valid and no new
sign has been passed.

NOTE

In certain markets, the Road Sign Informa-
tion

*

 function is only available in combina-

tion with Sensus Navigation

*

.

NOTE

If a downloaded third-party app is used for
navigation, there is no support for speed-
related information.

Related information

•

Road Sign Information

*

 (p. 282)

Speed limit and speed camera

warnings from Road Sign

Information

*

There are subfunctions for Road Sign Infor-
mation (RSI

20

) that can alert the driver if the

speed limit has been exceeded or if there are
speed cameras nearby.

Example of speed camera and speed limit informa-

tion in the instrument panel

Speed limit warning

When Speed Warning is acti-
vated, the symbol for the cur-
rent speed limit in the instru-
ment panel

21

 will flash tem-

porarily if that speed is excee-
ded.

19

Only vehicles with Sensus Navigation

*

.

20

Road Sign Information

21

Road signs differ by market – the illustration shown here is just an example.

DRIVER SUPPORT

}}

* Option/accessory.

285

The driver can be alerted if the vehicle is
exceeding a detected speed limit and is
approaching a speed camera.

Speed Limit Warning

 warns the driver if the

vehicle's speed has exceeded the applicable
speed limit or the stored maximum speed. The
warning will be repeated once after
about 1 minute in that speed limit area if the
driver does not slow down.

A new warning and message indicating that
the speed limit has been exceeded will be pro-
vided only when the vehicle has entered a
new/different speed limit area.

NOTE

For an audible alert to be provided if the
speed is exceeded, the 

Speed Limit

Warning

 function must be activated and

the 

Road Sign Audio Warning

 sub-func-

tion must be 

On

. Audible alerts are provi-

ded if the vehicle's speed exceeds the
speed displayed by Road Sign Information
in the instrument panel.

Speed camera warning

Vehicles equipped with Road
Sign Information and Sensus
Navigation can provide infor-
mation on upcoming speed
cameras in the instrument
panel

22

.

If the vehicle exceeds a detected speed limit
with the 

Speed Limit Warning

 function acti-

vated, the driver is given a speed warning
when the vehicle is approaching a speed cam-
era if the navigation map for the vehicle's cur-
rent location contains information on speed
cameras.

NOTE

It is possible to receive an audible alert for
speed cameras regardless of the vehicle's
speed and whether or not the speed limit is
exceeded, even if the 

Road Sign Audio

Warning

 function is deactivated.

Related information

•

Road Sign Information

*

 (p. 282)

•

Activating or deactivating warnings from
Road Sign Information

*

 (p. 285)

•

Road Sign Information

*

 limitations

(p. 286)

Activating or deactivating

warnings from Road Sign

Information

*

The Road Sign Information (RSI

23

) subfunc-

tion 

Speed Limit Warning

 is optional – the

driver can choose to have the subfunction
activated or deactivated.

Activating Speed Warning

1. Select 

Settings

My Car

IntelliSafe

Road Sign Information

 in the center

display's Top view.

2. Select 

Speed Limit Warning

.

> The function is activated and a speed

limit selector is displayed.

Adjusting the Speed Warning limit

The driver can adjust the settings to be alerted
at a higher speed than the posted speed limit.

1. Select 

Settings

My Car

IntelliSafe

Road Sign Information

 in the center

display's Top view.

2. Select 

Speed Limit Warning

.

> The function is activated and a speed

limit selector is displayed.

22

Information on speed cameras on the navigation map is not available for all markets/areas.

23

Road Sign Information

||

DRIVER SUPPORT

* Option/accessory.

286

3. Tap the up/down arrows on the screen to

adjust the speed at which the Speed
Warning will be given.

Please note that the set
warning limit will not be used
when a speed camera symbol
is displayed in the instrument
panel.

Activating audible alert for Speed
Warning

1. Select 

Settings

My Car

IntelliSafe

Road Sign Information

 in the center

display's Top view.

2. Select/deselect 

Road Sign Audio

Warning

 to activate/deactivate the audi-

ble alert.

When 

Road Sign Audio Warning

 is acti-

vated, the driver will also be alerted if the vehi-
cle is approaching a one-way/"no-entry" road
or entrance.

Activating speed camera alerts

If the vehicle is equipped with Sensus
Navigation

*

 and map data contains informa-

tion on speed cameras, the driver can choose
to receive an audible alert if the vehicle is
approaching a speed camera.

1. Select 

Settings

My Car

IntelliSafe

Road Sign Information

 in the center

display's Top view.

2. Select/deselect 

Speed Camera Audio

Warning

 to activate/deactivate the speed

camera audible alert.

Related information

•

Road Sign Information

*

 (p. 282)

•

Speed limit and speed camera warnings
from Road Sign Information

*

 (p. 284)

•

Road Sign Information

*

 limitations

(p. 286)

Road Sign Information

*

 limitations

Road Sign Information (RSI

24

) functionality

may be reduced in certain situations.

The function could have reduced functionality
due to e.g.:

•

faded road signs

•

signs located in a curve in the road

•

twisted or damaged signs

•

signs positioned high above the road

•

fully/partially obstructed or poorly posi-
tioned signs

•

signs partially or fully covered by frost,
snow and/or dirt

•

digital road maps

25

 that are outdated,

incorrect or do not contain speed informa-
tion

26

NOTE

In certain markets, the Road Sign Informa-
tion

*

 function is only available in combina-

tion with Sensus Navigation

*

.

24

Road Sign Information

DRIVER SUPPORT

}}

* Option/accessory.

287

NOTE

Certain types of bike carriers that are con-
nected to the trailer socket may be inter-
preted as a connected trailer by the RSI
function. In such cases, the instrument
panel may indicate incorrect speed infor-
mation.

NOTE

The function uses the vehicle's camera and
radar sensor, which has certain general
limitations.

Related information

•

Road Sign Information

*

 (p. 282)

•

Camera/radar sensor limitations (p. 386)

Cruise control

Cruise Control (CC

27

) can help the driver

maintain an even speed to provide a more
relaxing driving experience on highways and
long, straight roads with even traffic flows.

Function buttons and symbols

: Activates Cruise Control from

standby mode and resumes the set speed

: Increases the set speed

: 

From standby mode

 – activates

Cruise Control and sets the current speed

: 

From active mode

 – deactivates/

puts Cruise Control in standby mode

: Reduces the set speed

Marker for set speed

The vehicle's current speed

Set speed

NOTE

In vehicles equipped with Adaptive Cruise
Control

*

(ACC

28

), it is possible to switch

between Cruise Control and Adaptive
Cruise Control.

25

Vehicles equipped with Sensus Navigation

*

.

26

Map data and speed information is not available for all areas.

27

Cruise Control

28

Adaptive Cruise Control

||

DRIVER SUPPORT

* Option/accessory.

288

WARNING

•

The function is supplementary driver
support intended to facilitate driving
and help make it safer – it cannot han-
dle all situations in all traffic, weather
and road conditions.

•

•

Driver support functions are not a sub-
stitute for the driver's attention and
judgment. The driver is always respon-
sible for ensuring the vehicle is driven
in a safe manner, at the appropriate
speed, with an appropriate distance to
other vehicles, and in accordance with
current traffic rules and regulations.

Using engine braking instead of
applying the brakes

Cruise Control regulates speed by lightly
applying the brakes. On downgrades, it can
sometimes be desirable to roll a bit faster and
let speed be reduced instead by engine brak-
ing alone. The driver can temporarily disen-
gage the Cruise Control braking function.

To disengage CC:

–

Press the accelerator pedal about halfway
down and then release it.
> Cruise Control will automatically disen-

gage the automatic brake function and
speed will only be reduced using the
engine braking function.

Related information

•

Driver support systems (p. 274)

•

Selecting and activating cruise control
(p. 288)

•

Deactivating cruise control (p. 289)

•

Cruise control standby mode (p. 290)

•

Adjusting set speed for driver support
(p. 317)

•

Switching between cruise control and
Adaptive Cruise Control

*

 in the center dis-

play (p. 297)

Selecting and activating cruise

control

The Cruise Control (CC

29

) function must be

selected and activated in order to regulate
speed.

In order to start Cruise Control from standby
mode, the vehicle's current speed must be
30 km/h (20 mph) or higher.

1. Press the 

◀

 (1) or 

▶

 (3) button on the

steering wheel keypad and scroll to the

cruise control symbol 

 (4).

> Gray symbol – cruise control is in

standby mode.

29

Cruise Control

DRIVER SUPPORT

* Option/accessory.

289

2. When cruise control is selected, press 

(2) on the steering wheel keypad to acti-
vate.
> White symbol – cruise control starts

and the current speed is stored as the
maximum speed. The lowest speed
that can be set is 30 km/h (20 mph).

Reactivating cruise control to the last
stored speed

–

When cruise control is selected, press 
on the steering wheel keypad to activate.
> The Cruise Control marking in the

instrument panel will change from
GRAY to WHITE and the vehicle will
then return to the most recently set
speed.

WARNING

A noticeable increase in speed may follow
when the speed is resumed with the 

steering wheel button.

Related information

•

Cruise control (p. 287)

•

Deactivating cruise control (p. 289)

•

Cruise control standby mode (p. 290)

Deactivating cruise control

Cruise control (CC

30

) can be deactivated and

switched off.

1. Press the 

 button on the steering

wheel (2).
> The symbol and markings turn gray –

cruise control goes into standby mode.

2. Press the 

◀

 (1) or 

▶

 (3) buttons on the

steering wheel to select another function.
> The cruise control symbol and marking

(4) in the instrument panel will go out
and the stored maximum speed will be
erased.

Related information

•

Cruise control (p. 287)

•

Switching between cruise control and
Adaptive Cruise Control

*

 in the center dis-

play (p. 297)

•

Selecting and activating cruise control
(p. 288)

•

Cruise control standby mode (p. 290)

30

Cruise Control

DRIVER SUPPORT

* Option/accessory.

290

Cruise control standby mode

Cruise control (CC

31

) can be deactivated and

put in standby mode. This may happen auto-
matically or be due to driver intervention.

Standby mode means that the function is
selected in the instrument panel but not acti-
vated. In standby mode, cruise control will not
regulate speed.

Standby mode due to action by the
driver

Cruise control will be deactivated and put in
standby mode if any of the following occurs:

•

The brakes are applied.

•

The gear selector is moved to 

N

.

•

The vehicle is driven faster than the set
speed for more than 1 minute.

The driver must then control the vehicle's
speed.

Temporarily increasing speed using the accel-
erator pedal, e.g. when passing another vehi-
cle, will not affect the setting. The vehicle will
return to the set speed when the accelerator
pedal is released.

Automatic standby mode

The function may automatically go into
standby mode if one of the following occurs:

•

The wheels lose traction.

•

The engine speed (rpm) is too low/high.

•

The temperature in the brake system
becomes too high.

•

The vehicle's speed goes below 30 km/h
(20 mph).

The driver must then control the vehicle's
speed.

Related information

•

Cruise control (p. 287)

•

Selecting and activating cruise control
(p. 288)

•

Deactivating cruise control (p. 289)

Adaptive Cruise Control

*

32

Adaptive Cruise Control (ACC

33

) can help the

driver to maintain a constant speed, com-
bined with a preset time interval to the vehi-
cle in front.

The camera/radar sensor measures the distance to

the vehicle ahead.

Adaptive Cruise Control can help provide a
more relaxed driving experience on long trips
on highways or long, straight roads with even
traffic flows.

The driver sets a speed and a time interval to
the vehicle ahead. If the camera/radar sensor
detects a slower-moving vehicle ahead, your
vehicle's speed will be automatically adapted
according to the set time interval to that vehi-

31

Cruise Control

32

Depending on market, this function can be either standard or optional.

33

Adaptive Cruise Control

DRIVER SUPPORT

* Option/accessory.

291

cle. When there are no longer slower-moving
vehicles ahead, the vehicle will return to the
set speed.

If the Curve Speed Assist (CSA)

*

 function is

activated, it may also affect the vehicle's
speed.

Adaptive Cruise Control is designed to:

•

smoothly regulate speed. The driver must
apply the brakes in situations requiring
immediate braking. For example, when
there are great differences in speed
between vehicles or if the vehicle ahead
brakes suddenly. Due to limitations in the
radar sensor, braking may occur unexpect-
edly or not at all.

•

follow a vehicle ahead in the same lane
and maintain a time interval to that vehicle
set by the driver. If the radar sensor does
not detect a vehicle ahead, it will instead
maintain the speed set by the driver. This
will also happen if the speed of the vehicle
ahead exceeds the set speed for your vehi-
cle.

WARNING

•

The function is supplementary driver
support intended to facilitate driving
and help make it safer – it cannot han-
dle all situations in all traffic, weather
and road conditions.

•

•

Driver support functions are not a sub-
stitute for the driver's attention and
judgment. The driver is always respon-
sible for ensuring the vehicle is driven
in a safe manner, at the appropriate
speed, with an appropriate distance to
other vehicles, and in accordance with
current traffic rules and regulations.

CAUTION

Only a workshop may perform mainte-
nance on driver support components – an
authorized Volvo workshop is recom-
mended.

Related information

•

Driver support systems (p. 274)

•

Adaptive Cruise Control

*

 controls (p. 292)

•

Adaptive Cruise Control

*

 displays (p. 292)

•

Selecting and activating Adaptive Cruise
Control

*

 (p. 293)

•

Adaptive Cruise Control

*

 limitations

(p. 296)

•

Symbols and messages for Adaptive
Cruise Control

*

 (p. 298)

•

Collision risk warning from driver support
(p. 315)

•

Setting time interval to the vehicle ahead
(p. 318)

•

Adjusting set speed for driver support
(p. 317)

•

Auto-hold braking with driver support
(p. 319)

•

Switching target vehicles with driver sup-
port (p. 316)

•

Passing assistance

*

 (p. 314)

•

Contacting Volvo (p. 26)

DRIVER SUPPORT

* Option/accessory.

292

Adaptive Cruise Control

*

34

controls

A summary of how Adaptive Cruise Control
(ACC

35

) is controlled using the left-side steer-

ing wheel keypad and how the function is
shown in the display.

: 

From standby mode

 - activates and

sets the current speed

: 

From active mode

 - deactivates/

puts in standby mode

: Activates the function from standby

mode and resumes the set speed

: Increases the set speed

: Reduces the set speed

Increases the time interval to the vehicle
ahead
Reduces the time interval to the vehicle
ahead
Target vehicle indicator: the function has
detected and is following a target vehicle
using the set time interval
Symbol for time interval to the vehicle
ahead

Related information

•

Adaptive Cruise Control

*

 (p. 290)

•

Adaptive Cruise Control

*

 limitations

(p. 296)

Adaptive Cruise Control

*

36

displays

The following illustrations show how Adap-
tive Cruise Control (ACC

37

) can appear in the

various displays in different situations.

Speed

Speed indicators

Set speed

Speed of the vehicle ahead

The current speed of your vehicle

34

Depending on market, this function can be either standard or optional.

35

Adaptive Cruise Control

36

Depending on market, this function can be either standard or optional.

DRIVER SUPPORT

}}

* Option/accessory.

293

Time interval

Adaptive Cruise Control will
only regulate the time interval
to the vehicle ahead when
the distance symbol shows
two vehicles. A speed interval
will be marked at the same
time.

When driving

In the following illustration, Road Sign Infor-
mation

*

 (RSI

38

) indicates that the maximum

permitted speed is 130 km/h (80 mph).

The previous illustration shows that Adaptive
Cruise Control is set to maintain a speed of
110 km/h (68 mph) and that there is no target
vehicle ahead to follow.

The previous illustration shows that Adaptive
Cruise Control is set to maintain a speed of
110 km/h (68 mph) and is following a target
vehicle ahead, which is traveling at the same
speed.

Related information

•

Adaptive Cruise Control

*

 (p. 290)

•

Adaptive Cruise Control

*

 limitations

(p. 296)

Selecting and activating Adaptive

Cruise Control

*

39

Adaptive Cruise Control (ACC

40

) must first be

selected and then activated before it can reg-
ulate speed and distance.

To start the function:

•

The driver's seat belt must be buckled and
the driver's door must be closed.

•

There must be a vehicle ahead (target
vehicle) within a reasonable distance or

37

Adaptive Cruise Control

38

Road Sign Information

39

Depending on market, this function can be either standard or optional.

||

DRIVER SUPPORT

* Option/accessory.

294

your vehicle's current speed must be at
least 15 km/h (9 mph).

1. Press the 

◀

 (2) or 

▶

 (3) button on the

steering wheel keypad and scroll to the
Adaptive Cruise Control symbol 

 (4).

> Gray symbol – Adaptive Cruise Control

is in standby mode.

2. When Speed Limiter is selected, press

 (1) on the steering wheel keypad to

activate.
> White symbol – Speed Limiter starts

and the current speed is stored as the
maximum speed.

Reactivating Adaptive Cruise Control
to the last stored speed

–

When Adaptive Cruise Control is selected,
press 

 on the steering wheel keypad to

activate.
> The Cruise Control marking in the

instrument panel will change from
GRAY to WHITE and the vehicle will
then return to the most recently set
speed.

WARNING

A noticeable increase in speed may follow
when the speed is resumed with the 

steering wheel button.

Related information

•

Adaptive Cruise Control

*

 (p. 290)

•

Deactivating Adaptive Cruise Control

*

(p. 294)

•

Switching between cruise control and
Adaptive Cruise Control

*

 in the center dis-

play (p. 297)

•

Adaptive Cruise Control

*

 limitations

(p. 296)

Deactivating Adaptive Cruise

Control

*

41

Adaptive Cruise Control (ACC

42

) can be deac-

tivated and switched off.

1. Press the 

 button on the steering

wheel (1).
> The symbol and markings turn gray –

Adaptive Cruise Control goes into
standby mode. The time interval indica-
tor light and any symbols for the target
vehicle will go out.

40

Adaptive Cruise Control

41

Depending on market, this function can be either standard or optional.

42

Adaptive Cruise Control