Volvo XC60 (2021 year). Manual in english - page 13

CLIMATE CONTROL

}}

* Option/accessory.

227

Setting the blower speed for the

rear seats

*

The blower can be set to several different
automatically controlled speeds for the rear
seat.

Setting blower speed for the rear
seats from the front seats

1. Tap the symbol in the center of the climate

bar to open Climate view in the center dis-
play.

2. Select the 

Rear climate

 tab.

Blower control buttons in the 

Rear climate

 tab in

Climate view.

3. Tap the desired blower speed, 

1

-

5

.

The blower speed for the rear seats can be
switched off by tapping 

2nd row climate

.

> The blower speed will be changed and

the buttons for the set speed will light
up.

Setting blower speed for the rear
seats from the rear seats

1. Tap the unlock button on the tunnel con-

sole's climate panel to access the con-
trols.

Blower controls on the rear climate panel of the tun-

nel console.

2. Tap the desired blower speed, 

1

-

5

.

> The blower speed will be changed and

the buttons for the set speed will light
up.

NOTE

The blower speed for the rear seat cannot
be set if the blower speed for the front seat
is 

Off

.

The rear seat blower speed can only be
turned off from the climate view in the cen-
ter display.

||

CLIMATE CONTROL

228

NOTE

The climate system automatically adapts
airflow as needed within the set blower
speed, which means that airflow speed
may vary slightly within the same blower
speed.

Related information

•

Climate system controls (p. 216)

Setting the temperature for the

front seats

5

The temperature can be set to the desired
number of degrees for the front seat climate
zones.

Temperature buttons in the climate bar.

1. Tap the left- or right-side temperature but-

tons in the center display's climate bar to
open the control.

Temperature control.

2. Set the temperature by doing one of the

following:

•

dragging the control to the desired
temperature, or

•

tapping 

+

−

 to raise/lower the tempera-

ture.

> The temperature will be set and the

button will display the new tempera-
ture.

NOTE

Heating/cooling cannot be accelerated by
choosing a higher/lower temperature than
the desired temperature.

5

The same setting applies to the rear seats with the 2-zone climate system.

CLIMATE CONTROL

}}

* Option/accessory.

229

Related information

•

Climate system controls (p. 216)

Setting the temperature for the

rear seats

*

The temperature can be set to the desired
number of degrees for the rear seat climate
zones.

Setting the temperature for the rear
seats from the front seats

1. Tap the symbol in the center of the climate

bar to open Climate view in the center dis-
play.

2. Select the 

Rear climate

 tab.

Temperature buttons in the 

Rear climate

 tab in

Climate view.

3. Tap the left- or right-side temperature but-

ton to open the control.

||

CLIMATE CONTROL

230

Temperature control.

4. Set the temperature by:

•

dragging the control to the desired
temperature.

•

tapping 

+

−

 to raise/lower the tempera-

ture.

> The temperature will be set and the

button will display the new tempera-
ture.

Setting the temperature for the rear
seats from the rear seats

1. Tap the unlock button on the tunnel con-

sole's climate panel to access the con-
trols.

Temperature controls on the rear climate panel of the

tunnel console.

2. Tap the left or right side's 

<>

 buttons to

lower/raise the temperature.
> The temperature will be changed and

the climate panel screen will show the
new temperature.

NOTE

Heating/cooling cannot be accelerated by
choosing a higher/lower temperature than
the desired temperature.

Related information

•

Climate system controls (p. 216)

Synchronize temperature

The temperature in the different climate
zones of the vehicle can be synchronized
with the temperature set for the driver's side.

Synchronization button on the driver's side tempera-

ture control.

1. Tap the driver's side temperature button in

the center display's climate bar to open
the control.

2. Tap 

Synchronize temperature

.

> The temperature for all of the vehicle's

climate zones will be synchronized with
the one set for the driver's side and the
synchronization symbol will be dis-
played next to the temperature button.

Synchronization is stopped with another press
on 

Synchronize temperature

 or by changing

the temperature setting for a climate zone
other than the driver's.

CLIMATE CONTROL

* Option/accessory.

231

Related information

•

Climate system controls (p. 216)

Activating and deactivating air

conditioning

The air conditioning cools and dehumidifies
incoming air as needed.

When the air conditioning is activated, it will
be switched on and off automatically by the
climate system as needed.

1. Tap the symbol in the center of the climate

bar to open Climate view in the center dis-
play.

2. Tap 

AC

.

> Air conditioning is activated/deacti-

vated and the button lights up/goes
out.

NOTE

For optimal air conditioning function, close
all the side windows and the panoramic
roof

*

.

NOTE

The air conditioning cannot be activated
when the fan speed is set to 

Off

.

Related information

•

Climate system controls (p. 216)

CLIMATE CONTROL

* Option/accessory.

232

Parking climate

*

Parking climate is an umbrella term for vari-
ous functions that improve the passenger
compartment climate when the vehicle is
parked, e.g. preconditioning.

Parking climate functions are con-
trolled from the 

Parking climate

 tab

in the center display's Climate view.
Tap the symbol in the center of the

climate bar to open Climate view.

Related information

•

Climate (p. 204)

•

Preconditioning

*

 (p. 232)

•

Pre-cleaning

*

 (p. 236)

•

Climate comfort retaining function

*

(p. 237)

•

Parking climate symbols and messages

*

(p. 239)

Preconditioning

*

Preconditioning is a climate function that, if
possible, attempts to achieve a comfortable
temperature in the passenger compartment
before driving.

Preconditioning can be started immediately or
started at a preset time using a timer.

In warm weather, the climate system venti-
lates the passenger compartment by blowing
air in from outside. The function cannot heat
the passenger compartment.

NOTE

During preconditioning of the passenger
compartment, the vehicle works to reach a
comfortable temperature and not the tem-
perature set in the climate system.

NOTE

Pre-cleaning

*

 starts automatically when

preconditioning is complete.

Related information

•

Parking climate

*

 (p. 232)

•

Starting and stopping preconditioning

*

(p. 232)

•

Preconditioning timer

*

 (p. 233)

•

Pre-cleaning

*

 (p. 236)

Starting and stopping

preconditioning

*

Preconditioning ventilates the passenger
compartment, if possible, before driving. The
function can be started in the center display
or from a cellular phone.

Starting and stopping from the vehicle

1. Tap the symbol in the center of the climate

bar to open Climate view in the center dis-
play.

2. Select the 

Parking climate

 tab.

3. Tap 

Start Pre-con. & Cleaning

.

> Preconditioning starts/stops and the

button lights up/goes out.

NOTE

The vehicle doors and windows should be
closed during preconditioning of the pas-
senger compartment.

NOTE

Pre-cleaning

*

 starts automatically when

preconditioning is complete.

CLIMATE CONTROL

}}

* Option/accessory.

233

Starting from app

A device with the Volvo On Call

*

 app can be

used to start preconditioning or check set-
tings. Preconditioning ventilates the passen-
ger compartment by blowing in air from out-
side.

The passenger compartment can also be pre-
conditioned using the Engine Remote Start
(ERS)

6

 function using the Volvo On Call

*

 app.

Related information

•

Parking climate

*

 (p. 232)

•

Preconditioning

*

 (p. 232)

•

Preconditioning timer

*

 (p. 233)

•

Pre-cleaning

*

 (p. 236)

Preconditioning timer

*

The timer can be set to finish preconditioning
at a predetermined time.

The timer can store up to 8 preset times for

•

a time on a particular date

•

a time on one or more days of the week,
with or without the repeat function.

Related information

•

Preconditioning

*

 (p. 232)

•

Adding and editing timer settings for pre-
conditioning

*

 (p. 233)

•

Activating and deactivating precondition-
ing timer

*

 (p. 234)

•

Deleting preconditioning timer settings

*

(p. 235)

Adding and editing timer settings

for preconditioning

*

The preconditioning timer can store up to 8
preset timer settings.

Adding a timer setting

Button for adding a timer setting in the 

Parking

climate

 tab in Climate view.

1. Open Climate view in the center display.

2. Select the 

Parking climate

 tab.

6

Certain markets only.

||

CLIMATE CONTROL

* Option/accessory.

234

3. Tap 

Add timer

.

> A pop-up window will appear.

NOTE

It is not possible to add a time setting if
there are already 8 settings for the timer.
Delete a time setting to be able to add a
new one.

4. Tap 

Date

 to set a time for a specific date.

Tap 

Days

 to set a time for one or more

days of the week.

With 

Days

: Activate/deactivate the repeat

function by selecting/deselecting the

Repeat weekly

 checkbox.

5. With 

Date

: Select a date for precondition-

ing by scrolling in the date list using the
arrows.

With 

Days

: Select days of the week for

preconditioning by tapping the buttons for
the days.

6. Set the time at which preconditioning

should be completed by scrolling using
the arrows in the clock.

7. Tap 

Confirm

 to add a timer setting.

> The timer setting will be added to the

list and activated.

Editing the timer setting

1. Open Climate view in the center display.

2. Select the 

Parking climate

 tab.

3. Tap the timer setting you would like to

change.
> A pop-up window will appear.

4. To edit a timer setting, follow the proce-

dures described under the heading "Add-
ing a timer setting" above.

Related information

•

Preconditioning

*

 (p. 232)

•

Preconditioning timer

*

 (p. 233)

•

Activating and deactivating precondition-
ing timer

*

 (p. 234)

•

Deleting preconditioning timer settings

*

(p. 235)

Activating and deactivating

preconditioning timer

*

Timer settings in the preconditioning timer
can be activated or deactivated as needed.

Timer buttons in the 

Parking climate

 tab in Climate

view.

1. Open Climate view in the center display.

2. Select the 

Parking climate

 tab.

3. Activate/deactivate a timer setting by tap-

ping the timer button to the right of the
setting.
> The timer is activated/deactivated and

the button lights up/goes out.

Related information

•

Preconditioning

*

 (p. 232)

•

Preconditioning timer

*

 (p. 233)

CLIMATE CONTROL

* Option/accessory.

235

•

Adding and editing timer settings for pre-
conditioning

*

 (p. 233)

•

Deleting preconditioning timer settings

*

(p. 235)

Deleting preconditioning timer

settings

*

A preconditioning timer setting that is no
longer needed can be deleted.

The button for editing a list/deleting a timer setting in

the 

Parking climate

 tab in Climate view.

1. Open Climate view in the center display.

2. Select the 

Parking climate

 tab.

3. Tap 

Edit list

.

4. Tap the editing icon to the right in the list.

> The icon will change to the text 

Delete

.

5. Tap 

Delete

 to confirm.

> The timer setting will be deleted from

the list.

Related information

•

Preconditioning

*

 (p. 232)

•

Preconditioning timer

*

 (p. 233)

•

Adding and editing timer settings for pre-
conditioning

*

 (p. 233)

•

Activating and deactivating precondition-
ing timer

*

 (p. 234)

CLIMATE CONTROL

* Option/accessory.

236

Pre-cleaning

*

Pre-cleaning of the vehicle before driving is
used to improve the air quality in the passen-
ger compartment.

It is only possible to activate pre-cleaning
manually from the center display, but the func-
tion is also started automatically when pre-
conditioning has finished.

The function uses the ventilation system to
blow fresh air into the passenger compart-
ment and then circulates the air through the
climate system's passenger compartment air
filter.

Related information

•

Parking climate

*

 (p. 232)

•

Starting and stopping pre-cleaning

*

(p. 236)

•

Preconditioning

*

 (p. 232)

Starting and stopping pre-

cleaning

*

Pre-cleaning improves the air quality in the
passenger compartment before driving. The
function can be started in the center display
or from a cellular phone.

Starting and stopping from the vehicle

1. Tap the symbol in the center of the climate

bar to open Climate view in the center dis-
play.

2. Select the 

Parking climate

 tab.

3. Tap 

Start Pre-cleaning

.

> Pre-cleaning starts/stops and the but-

ton lights up/goes out.

Starting from app

*

A device with the Volvo On Call

*

 app can be

used to start pre-cleaning or check settings.

NOTE

Precleaning always starts automatically
when preconditioning is complete.

Related information

•

Parking climate

*

 (p. 232)

•

Pre-cleaning

*

 (p. 236)

•

Preconditioning

*

 (p. 232)

CLIMATE CONTROL

}}

* Option/accessory.

237

Climate comfort retaining

function

*

The climate in the passenger compartment
can be maintained when the vehicle is
parked, e.g. if the engine is turned off but the
driver or passengers remain in the vehicle.

This function can only be direct-started from
the center display.

The function utilizes several of the vehicle's
systems:

•

Residual heat from the engine is used to
help heat the passenger compartment to a
comfortable temperature.

•

In warm weather, the ventilation system
cools the passenger compartment by
blowing air in from outside.

NOTE

Climate comfort maintenance will be deac-
tivated if the vehicle is locked from the out-
side in order to avoid using residual engine
heat unnecessarily. This function is
intended to be used to maintain climate
comfort when the driver or a passenger
remains in the vehicle after the engine is
turned off.

The climate comfort retaining function is
limited in duration in cold weather depend-
ing on the amount of residual warmth
available.

Related information

•

Parking climate

*

 (p. 232)

•

Starting and switching off the climate
retaining function when parking

*

 (p. 237)

Starting and switching off the

climate retaining function when

parking

*

The climate retaining function maintains the
climate settings in the vehicle after the
engine has been switched off. The function
can be activated in the center display.

1. Tap the symbol in the center of the climate

bar to open Climate view in the center dis-
play.

2. Select the 

Parking climate

 tab.

3. Tap 

Keep climate comfort

.

> The climate comfort retaining function

will be activated/deactivated and the
button light will go on/off.

NOTE

Maintained climate comfort is not possible
when there is not sufficient residual engine
heat to maintain the climate settings in the
passenger compartment, or if the outside
temperature is above approximately 20 °C
(68 °F).

||

CLIMATE CONTROL

* Option/accessory.

238

NOTE

Climate comfort maintenance will be deac-
tivated if the vehicle is locked from the out-
side in order to avoid using residual engine
heat unnecessarily. This function is
intended to be used to maintain climate
comfort when the driver or a passenger
remains in the vehicle after the engine is
turned off.

The climate comfort retaining function is
limited in duration in cold weather depend-
ing on the amount of residual warmth
available.

Related information

•

Climate comfort retaining function

*

(p. 237)

CLIMATE CONTROL

* Option/accessory.

239

Parking climate symbols and

messages

*

A number of symbols and messages related
to parking climate may be displayed in the
instrument panel.

Messages related to parking climate can also
be displayed in a device that has the Volvo On
Call

*

 app.

Symbol Message

Meaning

Parking climate

Service required

Parking climate is not functioning properly. Contact a workshop

A

 to have the system checked as soon as

possible.

Parking climate

Temporarily unavailable

Parking climate is temporarily not functioning properly. If the problem persists, contact a workshop

A

 to have

the system checked.

A

An authorized Volvo workshop is recommended.

Related information

•

Parking climate

*

 (p. 232)

KEY, LOCKS AND ALARM

* Option/accessory.

242

Locking and unlocking

The vehicle can be locked and unlocked in
several different ways.

The vehicle can be locked and unlocked

•

using the buttons on the remote key

•

with the detachable key blade (if the bat-
tery in the remote key is discharged)

•

keyless

*

 (Passive Entry), the remote key

must be within range

•

from inside the vehicle using the lock con-
trols in the doors

•

remote door unlocking with Volvo On Call.

There are also several types of remote keys
that can be used.

For vehicles equipped with keyless locking
and unlocking

*

, a smaller, lighter and button-

less key is provided (Key Tag).

A Care Key

*

 (restricted key) makes it possible

to set restrictions for some of the vehicle's
functions e.g. maximum speed and maximum
audio system volume.

Related information

•

Locking and unlocking using the remote
key (p. 247)

•

Keyless locking and unlocking

*

 (p. 261)

•

Locking and unlocking from inside the
vehicle (p. 264)

•

Private Locking (p. 271)

•

Alarm (p. 273)

Lock indication

The turn signals will flash when the vehicle is
locked or unlocked.

Exterior confirmation

Locking

•

The turn signals will flash once and the
door mirrors will fold in

1

 to confirm the

vehicle is locked.

Unlocking

•

The turn signals will flash twice and the
door mirrors will fold out

1

 to confirm the

vehicle is unlocked.

The tailgate, hood and all doors must be
closed for confirmation to be given. If only the
driver's door is closed when the vehicle is
locked

2

, the vehicle will be locked but the turn

signals will only flash to indicate locking when
all doors and the tailgate and hood have been
closed.

KEY, LOCKS AND ALARM

* Option/accessory.

243

Lock and alarm indicators on the
dashboard

The locks and alarm indicator will display the
status of the locking system:

•

One long flash indicates locking.

•

When the vehicle is locked, this will be
indicated by short, pulsating flashes.

•

Rapid flashing after disabling the alarm
indicates that the alarm has been trig-
gered.

Lock button indicators

Front door

Lock buttons with indicator lights in front door.

Illuminated indicator lights in both front door
lock buttons indicate that all doors are locked.
If any door is opened, the lights in both doors
will go out.

Rear door

*

Lock button with indicator light in rear door.

Illuminated indicator lights in each door indi-
cate that that particular door is locked. If any
door is unlocked and opened, the indicator
light in that door will go out. The lights in the
other doors will remain illuminated.

Other indicators

The approach lighting and home safe lighting
functions may be activated when locking and
unlocking.

Related information

•

Lock confirmation settings (p. 244)

•

Locking and unlocking (p. 242)

•

Welcome Light (p. 166)

•

Using home safe lighting (p. 166)

1

Only vehicles with power folding mirrors.

2

Does not apply to vehicles equipped with keyless locking/unlocking

*

.

KEY, LOCKS AND ALARM

* Option/accessory.

244

Lock confirmation settings

Settings for how the vehicle confirms locking
and unlocking can be adjusted in the center
display's Settings menu.

To change the locking response settings:

1. Tap 

Settings

 in the center display's Top

view.

2. Tap 

My Car

Locking

.

3. Tap 

Visible Locking Feedback

 to select

when the vehicle should provide a visible
response:

•

Lock

•

Unlock

•

Both

Or turn off the function by marking 

Off 

.

4. Select to receive an audible response

when locking the vehicle by marking

Audible Locking Feedback

.

To change the settings for folding door mir-
rors

*

 when locking:

1. Tap 

Settings

 in the center display's Top

view.

2. Tap 

My Car

Mirrors and Convenience

.

3. Select 

Fold Mirror When Locked

 to acti-

vate or deactivate the function.

Related information

•

Lock indication (p. 242)

Remote key

The remote key is used to lock and unlock
doors, the tailgate and the fuel filler door. The
remote key must be in the vehicle in order to
start the engine.

Remote key

3

, Care Key and button-less key (Key

Tag)

*

.

The remote key is not physically used to start
the ignition because the vehicle is standard-
equipped with keyless start (Passive Start).
The key only needs to be in the front section of
the passenger compartment.

For vehicles equipped with keyless locking
and unlocking (Passive Entry)

*

, the engine can

be started with the key anywhere in the vehi-
cle. A smaller, lighter and button-less key (Key
Tag) is also provided.

3

The illustration is generic - details may vary according to vehicle model.