Volvo V60 (2021 year). Manual in english - page 10

WINDOWS, GLASS AND MIRRORS

}}

175

Interval wipers

Move the lever upward to put the wip-
ers in interval wiping mode. Set the

number of sweeps per time unit with the
thumb wheel when interval wipers are
selected.

Continuous wipers

Move the lever upward for the wipers
to operate at normal speed.

Move the lever upward again for the
wipers to operate at high speed.

CAUTION

Before activating the wipers, make sure
that the wiper blades are not frozen in
place and that any snow or ice on the
windshield and rear window has been
scraped away.

CAUTION

Use plenty of washer fluid when the wipers
clean the windshield. The windshield must
be wet when the windshield wipers are
working.

Related information

•

Using the rain sensor (p. 175)

•

Using the windshield and headlight wash-
ers (p. 177)

•

Using automatic rear window wiping
when backing up (p. 179)

•

Wiper blades and washer fluid (p. 174)

•

Activating and deactivating the rain sen-
sor's memory function (p. 176)

•

Using the rear window wiper/washer
(p. 178)

•

Filling washer fluid (p. 626)

•

Putting the wiper blades in service posi-
tion (p. 625)

•

Replacing windshield wiper blades
(p. 624)

•

Changing rear window wipers (p. 622)

Using the rain sensor

The rain sensor monitors the amount of water
on the windshield and automatically starts
the windshield wipers. Rain sensor sensitivity
can be adjusted using the thumb wheel on
the right-hand steering wheel lever.

Right-hand steering wheel lever.

Rain sensor button

Thumb wheel, sensitivity/interval wiper
speed

When the rain sensor is activated, the 
rain sensor symbol will be displayed in the
instrument panel.

Activating the rain sensor

When the rain sensor is activated, the engine
must be running or the ignition in mode 

I

 or 

II

while the windshield wiper lever is in position

0

 or in the single sweep position.

||

WINDOWS, GLASS AND MIRRORS

176

Activate the rain sensor by pressing the rain
sensor button 

.

Move the lever downward for an extra wiper
sweep.

Turn the thumb wheel upward for increased
sensitivity and downward for decreased sensi-
tivity. The wipers will make one extra sweep
when the thumb wheel is turned upward.

Deactivate the rain sensor

Deactivate the rain sensor by pressing the

 rain sensor button or moving the lever

upward to another wiper mode.

The rain sensor is automatically deactivated in
ignition mode 

0

 or when the engine is

switched off.

The rain sensor is also automatically deacti-
vated when the wiper blades are put in the
service position. The rain sensor will reactivate
when service mode is switched off.

CAUTION

The windshield wipers may start inadver-
tently and be damaged in automatic car
washes. Deactivate the rain sensor when
the engine is running or when the ignition
is in mode 

I

 or 

II

. The symbol in the instru-

ment panel will go out.

Related information

•

Using the windshield and headlight wash-
ers (p. 177)

•

Using automatic rear window wiping
when backing up (p. 179)

•

Wiper blades and washer fluid (p. 174)

•

Activating and deactivating the rain sen-
sor's memory function (p. 176)

•

Using the rear window wiper/washer
(p. 178)

•

Filling washer fluid (p. 626)

•

Putting the wiper blades in service posi-
tion (p. 625)

•

Replacing windshield wiper blades
(p. 624)

•

Changing rear window wipers (p. 622)

•

Using the windshield wipers (p. 174)

Activating and deactivating the

rain sensor's memory function

The rain sensor monitors the amount of water
on the windshield and automatically starts
the windshield wipers.

When the memory function is activated, the
rain sensor button does not need to be
pressed every time the vehicle is started:

1. Tap 

Settings

 in the center display's Top

view.

2. Tap 

My Car

Wipers

.

3. Select 

Rain Sensor Memory

 to activate/

deactivate the memory function.

Related information

•

Using the rain sensor (p. 175)

•

Using the windshield and headlight wash-
ers (p. 177)

•

Using automatic rear window wiping
when backing up (p. 179)

•

Wiper blades and washer fluid (p. 174)

•

Using the rear window wiper/washer
(p. 178)

•

Filling washer fluid (p. 626)

•

Putting the wiper blades in service posi-
tion (p. 625)

•

Replacing windshield wiper blades
(p. 624)

WINDOWS, GLASS AND MIRRORS

}}

* Option/accessory.

177

•

Changing rear window wipers (p. 622)

•

Using the windshield wipers (p. 174)

Using the windshield and

headlight washers

The windshield and headlight washers are
designed to clean the windshield and head-
lights. Use the right-side steering wheel lever
to start the windshield and headlight wash-
ers.

Starting the windshield and headlight
washers

Washing function, right-hand steering wheel lever.

–

Move the right-hand steering wheel lever
toward the steering wheel to start the
windshield and headlight washers.
> After the lever is released, the wipers

make several extra sweeps.

CAUTION

Avoid activating the washer system when
it is frozen or the fluid reservoir is empty.
Otherwise, there is a risk of damaging the
pump.

Headlight washer

*

To save washer fluid, the headlights are
washed automatically according to a defined
interval when the headlights are on.

Reduced washing

When there is about 1 liter (1 qt) of washer
fluid left in the reservoir and the 

Washer fluid

Level low, refill

 message is displayed in the

instrument panel together with the 

 sym-

bol, the washer fluid supply to the headlights
is cut off. This is to prioritize windshield clean-
ing and visibility through it. The headlights are
only washed if high or low beam is on.

Related information

•

Using the rain sensor (p. 175)

•

Using automatic rear window wiping
when backing up (p. 179)

•

Wiper blades and washer fluid (p. 174)

•

Activating and deactivating the rain sen-
sor's memory function (p. 176)

•

Using the rear window wiper/washer
(p. 178)

WINDOWS, GLASS AND MIRRORS

178

•

Filling washer fluid (p. 626)

•

Putting the wiper blades in service posi-
tion (p. 625)

•

Replacing windshield wiper blades
(p. 624)

•

Changing rear window wipers (p. 622)

•

Using the windshield wipers (p. 174)

Using the rear window wiper/

washer

The rear window washer/wiper is designed to
clean the rear window. Use the right-side
steering wheel lever to start and control the
wiper/washer.

Activating the rear window wiper/
washer

NOTE

The rear window wiper motor is equipped
with overheating protection that switches
off the motor if it becomes overheated. The
rear window wiper can be operated again
after a cooling-down period.

Select 

 for interval rear window

wiper.

Select 

 for continuous rear window

wiper.

–

Move the right-side steering wheel lever
forward to wash/wipe the rear window.

Related information

•

Using the rain sensor (p. 175)

•

Using the windshield and headlight wash-
ers (p. 177)

•

Using automatic rear window wiping
when backing up (p. 179)

•

Activating and deactivating the rain sen-
sor's memory function (p. 176)

•

Wiper blades and washer fluid (p. 174)

•

Filling washer fluid (p. 626)

WINDOWS, GLASS AND MIRRORS

179

•

Putting the wiper blades in service posi-
tion (p. 625)

•

Replacing windshield wiper blades
(p. 624)

•

Changing rear window wipers (p. 622)

•

Using the windshield wipers (p. 174)

Using automatic rear window

wiping when backing up

If reverse gear is engaged while the wind-
shield wipers are on, the rear window wipers
will start. This function is deactivated when a
different gear is selected.

1. Tap 

Settings

 in the Top view in the center

display.

2. Tap 

My Car

Wipers

.

3. Select 

Auto Rear Wiper

 to activate/deac-

tivate automatic rear window wiping
when backing up.

If the rear window wipers are already in con-
tinuous wiper mode, no change will be made
when reverse gear is engaged.

Related information

•

Using the rain sensor (p. 175)

•

Using the windshield and headlight wash-
ers (p. 177)

•

Wiper blades and washer fluid (p. 174)

•

Activating and deactivating the rain sen-
sor's memory function (p. 176)

•

Using the rear window wiper/washer
(p. 178)

•

Filling washer fluid (p. 626)

•

Putting the wiper blades in service posi-
tion (p. 625)

•

Replacing windshield wiper blades
(p. 624)

•

Changing rear window wipers (p. 622)

•

Using the windshield wipers (p. 174)

SEATS AND STEERING WHEEL

* Option/accessory.

182

Manual front seats

The front seats can be adjusted in a number
of different ways to help enhance your seat-
ing comfort.

Raise/lower the front edge of the seat
cushion

*

 by moving the control up/down.

1

Change the length of the seat cushion

*

 by

pulling up the lever and moving the cush-
ion forward/backward.
Move the seat forward/backing by lifting
the handle and moving the seat to a suita-
ble distance from the steering wheel and
pedals. Check to make sure the seat is
securely locked into place after its setting
has been changed.
Adjust lumbar support

*

 by pressing the

button up/down/forward/rearward.

2

Raise/lower the seat by moving the con-
trol up/down.
Change the backrest tilt by turning the
knob on the backrest.

WARNING

•

Do not adjust the seat while driving.
The seat should be adjusted so that the
brake pedal can be depressed fully. In
addition, position the seat as far rear-
ward as comfort and control allow.

•

Check that the seat is securely locked
into position after adjusting.

Related information

•

Power

*

 front seats (p. 183)

•

Adjusting the power

*

 front seats (p. 183)

•

Storing positions for seats, mirrors and
head-up display

*

 (p. 184)

•

Using stored positions for seats, mirrors
and head-up display

*

 (p. 185)

•

Adjusting front seat massage settings

*

(p. 187)

•

Adjusting

*

 front seat cushion length

(p. 188)

•

Front seat massage

*

 settings (p. 186)

•

Adjusting front seat side bolster settings

*

(p. 189)

•

Adjusting front seat lumbar support

*

(p. 189)

•

Adjusting the passenger seat from the
driver's seat

*

 (p. 191)

1

Only applies to the driver's seat.

2

Applies for four-way lumbar support

*

. Two-way lumbar support

*

 is adjusted forward/rearward.

SEATS AND STEERING WHEEL

}}

* Option/accessory.

183

Power

*

 front seats

The front seats can be adjusted in a number
of different ways to help enhance your seat-
ing comfort. The power seat can be moved
forward/backward and up/down. The height
and length

*

 of the seat cushion and the tilt of

the backrest can be adjusted. Lumbar sup-
port

*

 can be adjusted up, down, forward and

backward.

3

The seats can be adjusted when the engine is
running and for a certain period of time after
the door has been unlocked without the
engine running. They can also be adjusted for
a short period after the engine is turned off.

CAUTION

The power seats have an overload protec-
tor that is triggered if a seat is blocked by
any object. If this occurs, remove the
object and attempt to adjust the seat
again.

Related information

•

Manual front seats (p. 182)

•

Adjusting the power

*

 front seats (p. 183)

•

Storing positions for seats, mirrors and
head-up display

*

 (p. 184)

•

Using stored positions for seats, mirrors
and head-up display

*

 (p. 185)

•

Adjusting front seat massage settings

*

(p. 187)

•

Adjusting

*

 front seat cushion length

(p. 188)

•

Front seat massage

*

 settings (p. 186)

•

Adjusting front seat side bolster settings

*

(p. 189)

•

Adjusting front seat lumbar support

*

(p. 189)

•

Adjusting the passenger seat from the
driver's seat

*

 (p. 191)

Adjusting the power

*

 front seats

Set the desired seating position using the
controls on the front seat cushion. To set the
convenience functions, turn the multifunction
control

4

 upward/downward.

The illustration shows the controls in a vehicle with
four-way lumbar support

*

. Vehicles with two-way

lumbar support

*

 do not have the rotary multifunction

control.

In vehicles with four-way lumbar support

*

,

turn the multifunction control

4

 up/down to

set the convenience functions. In vehicles
with two-way lumbar support

*

, use the

round button to adjust the lumbar support
forward/rearward.
Raise/lower the front edge of the seat
cushion by moving the control up/down.

3

Applies for four-way lumbar support

*

. Two-way lumbar support

*

 is adjusted forward/rearward.

||

SEATS AND STEERING WHEEL

* Option/accessory.

184

Raise/lower the seat by moving the con-
trol up/down.
Move the seat forward/rearward by mov-
ing the control forward/rearward.
Change the backrest tilt by moving the
control forward/backward.

Only one movement (forward/rearward/up/
down) can be performed at a time.

The front seat backrests cannot be folded
down completely.

Related information

•

Manual front seats (p. 182)

•

Power

*

 front seats (p. 183)

•

Storing positions for seats, mirrors and
head-up display

*

 (p. 184)

•

Using stored positions for seats, mirrors
and head-up display

*

 (p. 185)

•

Adjusting front seat massage settings

*

(p. 187)

•

Adjusting

*

 front seat cushion length

(p. 188)

•

Front seat massage

*

 settings (p. 186)

•

Adjusting front seat side bolster settings

*

(p. 189)

•

Adjusting front seat lumbar support

*

(p. 189)

•

Adjusting the passenger seat from the
driver's seat

*

 (p. 191)

Storing positions for seats, mirrors

and head-up display

*

Adjustment settings for the power

*

 seat, door

mirrors and head-up display

*

 can be stored in

the memory buttons.

Two different positions for the power

*

 seat,

door mirrors and head-up display

*

 can be

stored using the memory buttons. The buttons
are located on the inside of either one or both

*

front doors.

Button 

M

 for storing a setting.

Memory button.

Memory button.

4

Not available in vehicles with two-way lumbar support

*

.

SEATS AND STEERING WHEEL

}}

* Option/accessory.

185

Storing positions

1. Adjust the seat, door mirrors and head-up

display to the desired position.

2. Press and hold the 

M

 button. The indica-

tor light in the button will illuminate.

3. Within three seconds, press and hold the 

1

or 

2

 button.

> When the position has been stored in

the memory button, an audio signal will
sound and the indicator light in the 

M

button will go out.

If none of the memory buttons are pressed
within three seconds, the 

M

 button will go out

and no position will be stored.

The seats, door mirrors or head-up display
must be readjusted before a new memory
position can be set.

NOTE

For the stored positions to work, all driver
profiles need to be in 

Protect Profile

mode.

Related information

•

Manual front seats (p. 182)

•

Power

*

 front seats (p. 183)

•

Adjusting the power

*

 front seats (p. 183)

•

Using stored positions for seats, mirrors
and head-up display

*

 (p. 185)

•

Adjusting front seat massage settings

*

(p. 187)

•

Adjusting

*

 front seat cushion length

(p. 188)

•

Front seat massage

*

 settings (p. 186)

•

Adjusting front seat side bolster settings

*

(p. 189)

•

Adjusting front seat lumbar support

*

(p. 189)

•

Adjusting the passenger seat from the
driver's seat

*

 (p. 191)

•

Adjusting the door mirrors (p. 168)

•

Head-up display settings

*

 (p. 142)

•

Protecting a driver profile (p. 136)

Using stored positions for seats,

mirrors and head-up display

*

If the positions for the power

*

 seat, door mir-

rors and head-up display

*

 have been stored,

they can be activated using the memory but-
tons.

Using a stored position

A stored position can be used with the front
door open or closed:

Front door open

–

Briefly press one of the memory buttons 

1

(

) or 

2

 (

). The power seats, door mir-

rors and head-up display will move and
stop at the positions stored in that button.

||

SEATS AND STEERING WHEEL

* Option/accessory.

186

Front door closed

–

Press and hold one of the memory buttons

1

 (

) or 

2

 (

) until the seat, door mirrors

and head-up display stop in the positions
stored in that memory button.

If the memory button is released, the seat,
door mirrors and head-up display will stop
moving.

WARNING

•

This list point needs to be translated
exactly to: "Because the driver's seat
can be adjusted with the ignition off,
children should never be left unatten-
ded in the vehicle.

•

Movement of the seat can be STOP-
PED at any time by pressing any but-
ton on the power seat control panel.

•

Do not adjust the seat while driving.

•

The seat should be adjusted so that the
brake pedal can be depressed fully. In
addition, position the seat as far rear-
ward as comfort and control allow.

•

The seat rails on the floor must not be
obstructed in any way when the seat is
in motion.

NOTE

For the stored positions to work, all driver
profiles need to be in 

Protect Profile

mode.

Related information

•

Manual front seats (p. 182)

•

Power

*

 front seats (p. 183)

•

Adjusting the power

*

 front seats (p. 183)

•

Storing positions for seats, mirrors and
head-up display

*

 (p. 184)

•

Adjusting front seat massage settings

*

(p. 187)

•

Adjusting

*

 front seat cushion length

(p. 188)

•

Front seat massage

*

 settings (p. 186)

•

Adjusting front seat side bolster settings

*

(p. 189)

•

Adjusting front seat lumbar support

*

(p. 189)

•

Adjusting the passenger seat from the
driver's seat

*

 (p. 191)

•

Adjusting the door mirrors (p. 168)

•

Head-up display settings

*

 (p. 142)

Front seat massage

*

 settings

The settings for the multifunctional seats can
be adjusted using either the mutifunction
control on the side of the seat or the center
display. The adjustment settings are shown in
the center display.

Multifunction control, located on the side of the seat

cushion.

Massage settings

The following massage settings are available:

•

On

/

Off

: Select 

On

/

Off

 to turn on/off the

massage function.

•

Programs 1-5

: There are 5 preset mas-

sage programs. Select 

Swell

, 

Tread

,

Advanced

, 

Lumbar

 or 

Shoulder

.

•

Intensity

: Select 

Low

, 

Normal

 or 

High

.

•

Speed

: Select 

Slow

, 

Normal

 or 

Fast

.

SEATS AND STEERING WHEEL

* Option/accessory.

187

Restarting the massage function

The massage function turns off automatically
after 20 minutes. The function is reactivated
manually.

–

Tap 

Restart

, which is displayed in the

center display, to restart the selected mas-
sage program.
> The massage program will restart. If no

selection is made, the message will be
stored in Top view.

Related information

•

Manual front seats (p. 182)

•

Power

*

 front seats (p. 183)

•

Adjusting the power

*

 front seats (p. 183)

•

Storing positions for seats, mirrors and
head-up display

*

 (p. 184)

•

Using stored positions for seats, mirrors
and head-up display

*

 (p. 185)

•

Adjusting front seat massage settings

*

(p. 187)

•

Adjusting

*

 front seat cushion length

(p. 188)

•

Adjusting front seat side bolster settings

*

(p. 189)

•

Adjusting front seat lumbar support

*

(p. 189)

•

Adjusting the passenger seat from the
driver's seat

*

 (p. 191)

Adjusting front seat massage

settings

*

The settings for the multifunctional seats can
be adjusted using either the mutifunction
control on the seat or the center display. The
adjustment settings are shown in the center
display.

Adjusting front seat massage settings

The front seat backrests have a massage func-
tion. Air-filled cushions provide the massaging
action and a number of settings are available.

The massage function can only be activated
when the engine is running.

1. Activate the multifunction control by turn-

ing the control 

 upward/downward. The

seat settings view will appear in the center
display.

2. Select 

Massage

 in the seat settings view.

3. Select massage settings by tapping the

center display or by moving the cursor up/
down using the multifunction control's
upper 

/lower 

 buttons. Change a set-

ting in the selected function by tapping
the arrows on the center display or by
using the multifunction control's front 

 /

rear 

 buttons.

Related information

•

Manual front seats (p. 182)

•

Power

*

 front seats (p. 183)

•

Adjusting the power

*

 front seats (p. 183)

•

Storing positions for seats, mirrors and
head-up display

*

 (p. 184)

•

Using stored positions for seats, mirrors
and head-up display

*

 (p. 185)

•

Adjusting

*

 front seat cushion length

(p. 188)

•

Front seat massage

*

 settings (p. 186)

•

Adjusting front seat side bolster settings

*

(p. 189)

•

Adjusting front seat lumbar support

*

(p. 189)

•

Adjusting the passenger seat from the
driver's seat

*

 (p. 191)

SEATS AND STEERING WHEEL

* Option/accessory.

188

Adjusting

*

 front seat cushion

length

Depending on the selected equipment level,
the length of the seat cushion can either be
adjusted using the multifunction control

*

 on

the side of the seat cushion, or manually
adjusted using the control on the front of the
seat cushion.

Adjusting seat cushion length using
the multifunction control

The multifunction control, located on the side of the

seat cushion.

1. Activate the multifunction control by turn-

ing the control 

 upward/downward. The

seat settings view will appear in the center
display.

2. Select 

Cushion extension

 in the seat set-

tings view.

•

Push in the front part of the four-way
button 

 to extend the seat cushion.

•

Press the rear part of the four-way but-
ton 

 to shorten the seat cushion.

Manually adjusting seat cushion
length

Control for adjusting seat cushion.

1. Grasp the 

 handle on the front of the

seat and pull upward.

2. Adjust the length of the seat cushion.

3. Release the handle and make sure the

seat cushion locks into position.

Related information

•

Manual front seats (p. 182)

•

Power

*

 front seats (p. 183)

•

Adjusting the power

*

 front seats (p. 183)

•

Storing positions for seats, mirrors and
head-up display

*

 (p. 184)

•

Using stored positions for seats, mirrors
and head-up display

*

 (p. 185)

•

Adjusting front seat massage settings

*

(p. 187)

•

Front seat massage

*

 settings (p. 186)

•

Adjusting front seat side bolster settings

*

(p. 189)

•

Adjusting front seat lumbar support

*

(p. 189)

•

Adjusting the passenger seat from the
driver's seat

*

 (p. 191)

SEATS AND STEERING WHEEL

}}

* Option/accessory.

189

Adjusting front seat side bolster

settings

*

Enhance comfort in the front seat by adjust-
ing the sides of the backrest.

The multifunction control is located on the side of the

seat cushion.

The side bolsters in the front seat backrests
can be inflated/deflated to adjust the amount
of support provided. The settings for the multi-
functional seats can be adjusted using either
the mutifunction control on the seat or the
center display. The adjustment settings are
shown in the center display.

To adjust the side bolsters:

1. Activate the multifunction control by turn-

ing it upward/downward 

. The seat set-

tings view will appear in the center dis-
play.

2. Select 

Side bolsters

 in the seat settings

view.

•

Press the front part of the four-way but-
ton to increase side bolster support 

.

•

Press the rear part of the four-way but-
ton to decrease side bolster support

.

Related information

•

Manual front seats (p. 182)

•

Power

*

 front seats (p. 183)

•

Adjusting the power

*

 front seats (p. 183)

•

Storing positions for seats, mirrors and
head-up display

*

 (p. 184)

•

Using stored positions for seats, mirrors
and head-up display

*

 (p. 185)

•

Adjusting front seat massage settings

*

(p. 187)

•

Adjusting

*

 front seat cushion length

(p. 188)

•

Front seat massage

*

 settings (p. 186)

•

Adjusting front seat lumbar support

*

(p. 189)

•

Adjusting the passenger seat from the
driver's seat

*

 (p. 191)

Adjusting front seat lumbar

support

*

Use the control on the side of the seat cush-
ion to adjust the lumbar support.

Multifunction control, in vehicles with four-way lum-
bar support

*

.

Control in vehicles with two-way lumbar support

*

.

||

SEATS AND STEERING WHEEL

* Option/accessory.

190

Lumbar support is adjusted using the multi-
function control in vehicles with four-way lum-
bar support

*

, or the round button in vehicles

with two-way lumbar support

*

. The control is

located on the side of the seat cushion.
Depending on the selected equipment level,
the lumbar support can be adjusted forward/
rearward and up/down (four-way lumbar sup-
port) or forward/backward (two-way lumbar
support).

Adjusting lumbar support in vehicles
with four-way lumbar support

1. Activate the multifunction control by turn-

ing the control 

 upward/downward. The

seat settings view will appear in the center
display.

2. Select 

Lumbar

 in the seat settings view.

•

Press the round button up 

/down 

to move the lumbar support upward/
downward.

•

Press the front part 

 of the button to

increase lumbar support.

•

Press the rear part 

 of the button to

decrease lumbar support.

Adjusting lumbar support in vehicles
with two-way lumbar support

1. Press the front part 

 of the round button

to increase lumbar support.

2. Press the rear part 

 of the round button

to decrease lumbar support.

Related information

•

Manual front seats (p. 182)

•

Power

*

 front seats (p. 183)

•

Adjusting the power

*

 front seats (p. 183)

•

Storing positions for seats, mirrors and
head-up display

*

 (p. 184)

•

Using stored positions for seats, mirrors
and head-up display

*

 (p. 185)

•

Adjusting front seat massage settings

*

(p. 187)

•

Adjusting

*

 front seat cushion length

(p. 188)

•

Front seat massage

*

 settings (p. 186)

•

Adjusting front seat side bolster settings

*

(p. 189)

•

Adjusting the passenger seat from the
driver's seat

*

 (p. 191)

SEATS AND STEERING WHEEL

* Option/accessory.

191

Adjusting the passenger seat from

the driver's seat

*

The front passenger seat can be adjusted
from the driver's seat.

Activating the function

The function is activated via the function view
in the center display:

Tap the 

Adjust Passenger

Seat

 button to activate.

Adjust passenger seat

The driver must adjust the passenger seat
within 10 seconds of activating the function. If
no adjustment is made within this time, the
function will be deactivated.

The driver adjusts the passenger seat using
the controls on the driver's seat:

Move the passenger seat forward/rear-
ward by moving the control forward/rear-
ward.
Change the backrest tilt of the passenger
seat by moving the control forward/back-
ward.

Related information

•

Manual front seats (p. 182)

•

Power

*

 front seats (p. 183)

•

Adjusting the power

*

 front seats (p. 183)

•

Storing positions for seats, mirrors and
head-up display

*

 (p. 184)

•

Using stored positions for seats, mirrors
and head-up display

*

 (p. 185)

•

Adjusting front seat massage settings

*

(p. 187)

•

Adjusting

*

 front seat cushion length

(p. 188)

•

Front seat massage

*

 settings (p. 186)

•

Adjusting front seat side bolster settings

*

(p. 189)

•

Adjusting front seat lumbar support

*

(p. 189)

SEATS AND STEERING WHEEL

* Option/accessory.

192

Folding down the rear seat

backrests

The rear seat backrest is split into two sec-
tions. The two sections can be folded forward
individually.

WARNING

•

Adjust the seat and ensure it locks into
position before driving. Use caution
when adjusting the seat. Uncontrolled
or careless adjustments could lead to
injury.

•

Long objects must always be securely
tied down to help prevent injury or
damage in the event of sudden brak-
ing.

•

Always turn off the engine and apply
the parking brake when loading or
unloading the vehicle.

•

Put the gear selector in 

P

 to help pre-

vent the gear selector from being inad-
vertently moved.

CAUTION

When the backrest is folded down, make
sure there are no objects in the rear seat,
and the seat belts are not buckled. Other-
wise there is a risk of damage to the
upholstery.

CAUTION

The armrest

*

 in the center seat must be

raised before the seat backrest is folded
down.

The ski hatch must be closed before the
seat backrest is folded down.

NOTE

The front seats may need to be pushed for-
ward and/or the backrest adjusted so that
the rear seat backrests can be fully low-
ered.

Folding down the backrests

The vehicle must be stationary and at least
one of the rear doors must be open before a
backrest can be folded down.

Make sure that the rear seat is unoccupied
and that there are no objects on the seat.

Push down the center seat's head
restraint manually.