Volvo S90 (2021 year). Manual in english - page 17

||

DRIVER SUPPORT

* Option/accessory.

298

on a road which is missing from Volvo
Cars database.

•

Connected Safety is not available in all
markets and does not cover all areas - a
retailer for Volvo has information on cur-
rent areas.

WARNING

•

In certain situations, the function may
give incorrect warnings for slippery
driving conditions.

•

The function cannot always detect
other vehicles with activated hazard
warning flashers or detect all sections
of road with slippery surfaces.

Related information

•

Connected Safety (p. 296)

•

Internet-connected car

*

 (p. 544)

Road Sign Information

*

The Road Sign Information function (RSI

13

)

can help the driver to observe speed-related
road signs and certain prohibition signs.

Examples of readable signs

14

.

RSI can provide information about such things
as current speed, when a motorway or road is
starting/ending, when overtaking is prohibited
or when the direction of travel is one-way.

If the car passes a speed limit sign, it will be
shown on the driver's display and the head-up
display

*

.

Road sign information (RSI

15

) also includes

subfunctions that can warn the driver if a

speed limit has been exceeded or in connec-
tion with speed cameras.

NOTE

In certain markets, the Road Sign Informa-
tion function

*

 is only available in combina-

tion with Sensus Navigation

*

.

13

Road Sign Information

14

Road signs are market-dependent - illustrations in these instructions only show a few examples.

15

Road Sign Information

DRIVER SUPPORT

}}

* Option/accessory.

299

WARNING

•

The function is supplementary driver
support intended to facilitate driving
and make it safer – it cannot handle all
situations in all traffic, weather and
road conditions.

•

•

Driver support functions are not a sub-
stitute for the driver's attention and
judgement. The driver is always
responsible for ensuring the car is
driven in a safe manner, at the appro-
priate speed, with an appropriate dis-
tance to other vehicles, and in accord-
ance with current traffic rules and reg-
ulations.

Related information

•

Driving support systems (p. 290)

•

Activating or deactivating road sign infor-
mation

*

 (p. 299)

•

Display mode for road sign information

*

(p. 300)

•

Road Sign Information and Sensus
Navigation

*

 (p. 302)

•

Warning for speed limitation and speed
camera from road sign information

*

(p. 302)

•

Limitations of Road Sign Information

*

(p. 304)

Activating or deactivating road

sign information

*

The Road Sign Information function (RSI

16

) is

optional – the driver can choose to activate or
deactivate this function.

Activate or deactivate the
function using this button in
the centre display's function
view.

•

Illuminated button indication – the func-
tion is activated.

•

Extinguished button indication – the func-
tion is deactivated.

||

DRIVER SUPPORT

* Option/accessory.

300

NOTE

•

If the automatic speed limiter function
is activated, road sign information is
shown in the driver display even if the
Road Sign Information function is not
activated.

•

To remove road sign information from
the driver display, you must deactivate

both

 the automatic speed limiter and

Road Sign Information.

•

When the automatic speed limiter
function is activated but Road Sign
Information is deactivated, no warn-
ings are given from Road Sign Infor-
mation. Road Sign Information must
also be activated in order to receive
warnings.

Related information

•

Road Sign Information

*

 (p. 298)

•

Automatic speed limiter (p. 308)

•

Limitations of Road Sign Information

*

(p. 304)

Display mode for road sign

information

*

The Road Sign Information function (RSI

17

)

shows road signs in different ways depend-
ing on the sign and the situation.

Example

18

 of detected speed information.

When the function detects a road sign with an
imposed speed limit, the driver display shows
the sign as a symbol combined with a col-
oured indication on the speedometer.

If the car is fitted with Sensus Navigation

*

,

speed-related information is also obtained
from map data, which means that the driver
display can show or change information on
the speed limit without having passed a
speed-related sign.

An additional sign, such as
"no overtaking", may be
shown together with the
speed limit symbol.

If the driver enters a road
marked with a no-entry sign
at the roadside, the symbol
for this sign flashes on and
off on the driver display as a
warning.

If the car is equipped with Sensus Navigation

*

,

information from map data is used to deter-
mine whether the car is being driven in the
wrong direction.

The driver can also get an acoustic warning
when driving towards a road marked with a
no-entry sign if the 

Road Sign Audio

Warning

 function is activated.

Speed limit or end of motorway

When the function detects an "indirect speed
limit sign" stating the end of the current speed
limit – e.g. at the end of a motorway – a sym-
bol appears with the corresponding road sign
in the driver's display.

16

Road Sign Information

17

Road Sign Information

18

Road signs are market-dependent - the illustrations in these instructions only show examples.

DRIVER SUPPORT

}}

* Option/accessory.

301

If the car is equipped with Sensus Navigation

*

,

direct speed limit signs are normally displayed
– indirect speed limit signs are only displayed
if map data has no information on the speed
limit for the road section in question.

Example of indirect speed limit sign:

End of all restrictions.

End of motorway.

The driver display symbol extinguishes after
10-30 seconds and remains so until the next
speed related sign is passed.

Changed speed limit

When passing a direct speed limit sign when a
speed limit changes, a symbol with the corres-
ponding road sign appears in the driver's dis-
play.

Example of direct speed limit
sign.

The driver display symbol extinguishes after
about 5 minutes until the next speed-related
sign is passed.

If the car is fitted with Sensus Navigation

*

,

speed limit signs are shown in the driver dis-
play when map data contains information on
the speed limit for the road section in ques-
tion, even if no direct sign has been passed. If
there is no information in map data, the sign is
extinguished approx. 3 minutes after the last
passing of a speed limit sign.

Additional signs

Examples of additional signs.

Sometimes different speed limits are signed
for the same road - an additional sign then
indicates the circumstances under which the
different speeds apply. The road section may
be particularly susceptible to accidents in rain
and/or fog, for example.

An additional sign relating to rain is displayed
only if the windscreen wipers are in use.

If a trailer is connected to the car's electrical
system and you pass a speed sign with the
additional sign "trailer", the indicated speed
will appear on the driver display.

||

DRIVER SUPPORT

* Option/accessory.

302

Some speed limits only apply
after a certain distance or at a
certain time of day. The driv-
er's attention is drawn to this
fact by means of a symbol for
an additional sign below the
speed symbol. The additional

symbol in the driver display will show either
“DIST” or “TIME”.

Sign for "School" and "Children at
play"

If a warning sign for "School"
or "Children at play" is
included in the satellite navi-
gator's map data

19

, the driver

display shows a sign of this
type.

Related information

•

Road Sign Information

*

 (p. 298)

•

Limitations of Road Sign Information

*

(p. 304)

Road Sign Information and Sensus

Navigation

*

If the car is equipped with Sensus Navigation

*

,

speed information is read from the navigation
unit in the following cases:

•

On detection of signs that indirectly indi-
cate a speed limit, such as motorway, dual
carriageway and city limit signs.

•

If a previously detected speed sign is
assumed not to apply any longer, but no
new sign has been detected.

NOTE

In certain markets, the Road Sign Informa-
tion function

*

 is only available in combina-

tion with Sensus Navigation

*

.

NOTE

If a downloaded third-party app is used for
navigation then there is no support for
speed-related information.

Related information

•

Road Sign Information

*

 (p. 298)

Warning for speed limitation and

speed camera from road sign

information

*

Road sign information (RSI

20

) includes sub-

functions that can warn the driver if a speed
limit has been exceeded or in connection with
speed cameras.

Examples of information on speed camera and speed

limit in the driver display

Warning for speed limit

The speed warning is given
by the driver display symbol

21

showing the applicable maxi-
mum permitted speed tem-
porarily flashing when this
speed is exceeded.

19

Only in cars with Sensus Navigation

*

.

20

Road Sign Information

21

Road signs are customised for each market – the one shown here is just an example.

DRIVER SUPPORT

}}

* Option/accessory.

303

A speed warning is always given if the speed
limit is exceeded in connection with speed
camera information.

Speed Limit Warning

 warns the driver when

the applicable speed limit or stored maximum
speed is exceeded – this warning is repeated
once after approx. 1 minute within the same
speed limit area unless the driver reduces the
speed.

A new warning for exceeding the speed limit,
including a reminder, will be given only when
the car reaches a new/different speed limit
area.

NOTE

To get an acoustic warning if you exceed
the required speed, the 

Speed Limit

Warning

 function must be activated and

the 

Road Sign Audio Warning

 subfunc-

tion must be set to 

On

. An acoustic warn-

ing is then given if the car's speed exceeds
the speed indicated by the Road Sign
Information function in the driver display.

Warning for speed camera

A car equipped with road
sign information and Sensus
Navigation can provide infor-
mation on an upcoming
speed camera in the driver
display

22

.

If the car exceeds a detected speed limit with
the 

Speed Limit Warning

 function activated,

a speed warning is given when the car
approaches a speed camera, provided that the
navigation map for the area in question con-
tains information on speed cameras.

NOTE

An option is available to receive an acous-
tic warning for speed cameras independ-
ently of the car's speed and exceeded
speed limit, even if the 

Road Sign Audio

Warning

 function is deactivated.

Related information

•

Road Sign Information

*

 (p. 298)

•

Activating or deactivating warnings from
road sign information

*

 (p. 303)

•

Limitations of Road Sign Information

*

(p. 304)

Activating or deactivating

warnings from road sign

information

*

The subfunction 

Speed Limit Warning

 for

Road Sign Information (RSI

23

) is optional –

the driver can choose to activate or deacti-
vate this subfunction.

Activating speed warning

1. Select 

Settings

My Car

IntelliSafe

Road Sign Information

 in the centre

display's top view.

2. Select 

Speed Limit Warning

.

> The function is activated and a speed

limit selector appears.

Adjust the limit for Speed Warning

The driver can select to receive a warning at a
higher speed than the signed speed.

1. Select 

Settings

My Car

IntelliSafe

Road Sign Information

 in the centre

display's top view.

2. Select 

Speed Limit Warning

.

> The function is activated and a speed

limit selector appears.

22

Information on speed cameras on the navigation map is not available for all markets/areas.

23

Road Sign Information

||

DRIVER SUPPORT

* Option/accessory.

304

3. Adjust the limit for Speed Warning by

pressing the up/down arrows on the
screen.

Note that the function does
not give any consideration to
selected limit adjustment
when the driver display
shows the speed camera
symbol.

Activating acoustic warning in
connection with speed warning

1. Select 

Settings

My Car

IntelliSafe

Road Sign Information

 in the centre

display's top view.

2. Select/deselect 

Road Sign Audio

Warning

 to activate/switch off the acous-

tic warning.

With the 

Road Sign Audio Warning

 function

activated, the driver is also warned when driv-
ing towards one-way traffic/no-entry entrance.

Activate speed camera warning

If the car is fitted with Sensus Navigation

*

 and

map data contains information on speed cam-
eras, the driver can opt to receive an audible
warning when approaching a speed camera.

1. Select 

Settings

My Car

IntelliSafe

Road Sign Information

 in the centre

display's top view.

2. Select/deselect 

Speed Camera Audio

Warning

 to activate/switch off the audi-

ble speed camera warning.

Related information

•

Road Sign Information

*

 (p. 298)

•

Warning for speed limitation and speed
camera from road sign information

*

(p. 302)

•

Limitations of Road Sign Information

*

(p. 304)

Limitations of Road Sign

Information

*

The Road Sign Information (RSI

24

) function

may have limitations in certain situations.

Examples of what can reduce the function are
as follows:

•

Faded signs

•

Signs positioned on bends

•

Rotated or damaged signs

•

Signs positioned high above the roadway

•

Fully/partially obscured or poorly posi-
tioned signs

•

Signs completely or partly covered with
frost, snow and/or dirt

•

Digital road maps

25

 are out-of-date, inac-

curate or have no speed information

26

NOTE

In certain markets, the Road Sign Informa-
tion function

*

 is only available in combina-

tion with Sensus Navigation

*

.

DRIVER SUPPORT

}}

* Option/accessory.

305

NOTE

The RSI function may interpret some types
of bicycle rack, connected to the electrical
socket for trailers, as a connected trailer. In
such cases, the driver display may show
incorrect speed information.

NOTE

This function uses the car's camera and
radar units, which have certain general lim-
itations.

Related information

•

Road Sign Information

*

 (p. 298)

•

Limitations for camera and radar unit
(p. 419)

Speed limiter

A speed limiter (SL

27

) can be likened to a

reverse cruise control - the driver regulates
the speed using the accelerator pedal but is
prevented from accidentally exceeding a pre-
selected/set maximum speed by the speed
limiter.

Buttons and symbols for the function.

: Activates the speed limiter from

standby mode and resumes stored maxi-
mum speed

: Increases the stored maximum

speed

: 

From standby mode

 – activates the

speed limiter and stores current speed

: 

From active mode

 – deactivates/

changes the speed limiter to standby
mode

: Reduces stored maximum speed

Marker for stored max speed

The car's current speed

Stored maximum speed

24

Road Sign Information

25

In cars equipped with Sensus Navigation

*

.

26

Map data with speed information does not exist for all areas.

27

Speed Limiter

||

DRIVER SUPPORT

306

WARNING

•

The function is supplementary driver
support intended to facilitate driving
and make it safer – it cannot handle all
situations in all traffic, weather and
road conditions.

•

•

Driver support functions are not a sub-
stitute for the driver's attention and
judgement. The driver is always
responsible for ensuring the car is
driven in a safe manner, at the appro-
priate speed, with an appropriate dis-
tance to other vehicles, and in accord-
ance with current traffic rules and reg-
ulations.

Related information

•

Driving support systems (p. 290)

•

Limitations for speed limiter (p. 308)

•

Selecting and activating speed limiter
(p. 306)

•

Deactivating the speed limiter (p. 307)

•

Temporary deactivation of speed limiter
(p. 308)

•

Set the stored speed for driver support
(p. 342)

•

Automatic speed limiter (p. 308)

Selecting and activating speed

limiter

The speed limiter function (SL

28

) must first

be selected and activated in order to be able
to regulate the speed.

The speed limiter cannot be activated until
after the engine has been started. The lowest
maximum speed that can be stored is
30 km/h (20 mph).

1. Press 

◀

 (1) or 

▶

 (3) to scroll to the symbol

for the speed limiter 

 (4).

> The symbol is grey – the speed limiter

is in standby mode.

2. When speed limiter is selected – press the

steering wheel button 

 (2) to activate.

> The symbol is white – the speed limiter

is started and the current speed is
stored as maximum speed.

DRIVER SUPPORT

307

Related information

•

Speed limiter (p. 305)

•

Deactivating the speed limiter (p. 307)

•

Temporary deactivation of speed limiter
(p. 308)

Deactivating the speed limiter

The speed limiter (SL

29

) can be deactivated

and switched off.

1. Press the steering wheel button 

 (2).

> The symbol and indicators turn grey –

the speed limiter is set in standby mode
and the driver can exceed the set speed
limit.

2. Press the steering wheel button 

◀

 (1) or 

▶

(3) to change to another function.
> The driver display's symbol and indica-

tor for speed limiter (4) are switched off
– which deletes the stored maximum
speed.

Related information

•

Speed limiter (p. 305)

•

Selecting and activating speed limiter
(p. 306)

•

Temporary deactivation of speed limiter
(p. 308)

28

Speed Limiter

29

Speed Limiter

DRIVER SUPPORT

* Option/accessory.

308

Temporary deactivation of speed

limiter

The speed limiter (SL

30

) can be temporarily

deactivated and set in standby mode.

The speed limiter can also be temporarily
deactivated and overridden with the accelera-
tor pedal without the speed limiter first having
to be set in standby mode - e.g. to be able to
quickly accelerate the car out of a situation.

In which case, proceed as follows:

1. Fully depress the accelerator pedal and

release it to interrupt acceleration when
the desired speed has been reached.
> In this mode, the speed limiter is still

activated and the driver display's sym-
bol is therefore WHITE.

2. Fully release the accelerator pedal when

the temporary acceleration is finished.
> The car is then engine-braked automat-

ically to below the last stored maximum
speed.

Related information

•

Speed limiter (p. 305)

•

Selecting and activating speed limiter
(p. 306)

•

Deactivating the speed limiter (p. 307)

Limitations for speed limiter

Speed limiter (SL

31

) has certain general limi-

tations.

On steep downhill gradients the speed limit-
er’s braking effect may be inadequate and
hence the stored maximum speed may be
exceeded. In this case, the driver is alerted by
the message 

Speed limit exceeded

 in the

driver display.

NOTE

A text message that the maximum speed is
exceeded will be activated if the speed has
been exceeded by at least 3 km/h
(approx. 2 mph).

Related information

•

Speed limiter (p. 305)

Automatic speed limiter

The Automatic Speed Limiter (ASL

32

) func-

tion helps the driver to adapt the car's maxi-
mum speed to the speed shown on the road
signs.

The Speed Limiter function (SL

33

) can be

changed to Automatic Speed Limiter (ASL).

The automatic speed limiter uses speed infor-
mation from the Road Sign Information

*

(RSI

34

) function to automatically adapt the

car's maximum speed.

WARNING

Even if the driver clearly sees the speed-

related road sign, the speed information

from the Road Sign Information

*

 (RSI)

function to ASL may be incorrect – in such

cases the driver must intervene him/herself

and accelerate or brake to a suitable speed.

30

Speed Limiter

31

Speed Limiter

32

Automatic Speed Limiter

33

Speed Limiter

DRIVER SUPPORT

* Option/accessory.

309

WARNING

•

The function is supplementary driver
support intended to facilitate driving
and make it safer – it cannot handle all
situations in all traffic, weather and
road conditions.

•

•

Driver support functions are not a sub-
stitute for the driver's attention and
judgement. The driver is always
responsible for ensuring the car is
driven in a safe manner, at the appro-
priate speed, with an appropriate dis-
tance to other vehicles, and in accord-
ance with current traffic rules and reg-
ulations.

Symbol for automatic speed limiter

The sign symbol (displayed along-
side the stored speed, "70", in the
centre of the speedometer) can be
shown in three colours with the fol-

lowing meanings:

Colour of

sign symbol

Meaning

Greenish yel-

low

The automatic speed limiter
is active.

Grey

The automatic speed limiter
is set in standby mode.

Orange

Automatic speed limiter is
in temporary standby mode
- e.g. due to a road sign not
being read.

Symbol for which speed limiter
function is active

The symbol display in the driver display
changes depending on whether it is cruise
control or automatic cruise control that is
active.

Symbol

SL ASL

WHITE symbol: Function active,

GREY symbol: Standby mode.

✓

✓

Sign symbol after "70" = Automatic

Speed Limiter is activated.

✓

Related information

•

Driving support systems (p. 290)

•

Activating or deactivating the automatic
speed limiter (p. 310)

•

Changing the tolerance for the automatic
speed limiter (p. 311)

•

Limitations for automatic speed limiter
(p. 311)

•

Speed limiter (p. 305)

•

Road Sign Information

*

 (p. 298)

34

Road Sign Information

DRIVER SUPPORT

* Option/accessory.

310

Activating or deactivating the

automatic speed limiter

The automatic speed limiter function (ASL

35

)

can be activated and deactivated as a supple-
ment to the speed limiter (SL

36

).

Activate or deactivate the
function using this button in
the centre display's function
view.

•

GREEN button indication – the function is
activated. Press the steering wheel button

 to start the automatic speed limiter

with the current speed.

•

GREY button indication – the function is
deactivated. Normal speed limiter is acti-
vated instead.

NOTE

•

If the automatic speed limiter function
is activated, road sign information
(RSI

37

) is shown in the driver display

even if the Road Sign Information is
not activated.

•

To remove road sign information from
the driver display, you must deactivate

both

 the automatic speed limiter and

Road Sign Information.

•

When the automatic speed limiter
function is activated but Road Sign
Information is deactivated, no warn-
ings are given from Road Sign Infor-
mation. Road Sign Information must
also be activated in order to receive
warnings.

Deactivating the automatic speed
limiter

To deactivate the automatic speed limiter:

–

Tap on the button in the function view.
> GREY button indication – ASL is

switched off and SL is activated
instead.

WARNING

After switching from ASL to SL the car will

no longer follow the signed speed limit but

only the stored maximum speed.

Related information

•

Speed limiter (p. 305)

•

Automatic speed limiter (p. 308)

•

Limitations for automatic speed limiter
(p. 311)

•

Road Sign Information

*

 (p. 298)

35

Automatic Speed Limiter

36

Speed Limiter

37

Road Sign Information

DRIVER SUPPORT

* Option/accessory.

311

Changing the tolerance for the

automatic speed limiter

The Automatic Speed Limiter function
(ASL

38

) can be set for different tolerance lev-

els. The tolerance is adjusted in the same way
as the speed setting is in the speed limiter.

If, for example, the car follows a signed speed
limit of 70km/h (43 mph) the driver can
instead choose to allow the car to maintain
75 km/h (47 mph).

Buttons and symbols for the function

–

Press the steering wheel button 

 (1)

until 70 km/h (43 mph) in the centre of
the speedometer (2) changes to 75 km/h
(47 mph).
> After which, the car uses the selected

tolerance 5 km/h (4 mph) as long as
signs passed are showing 70 km/h
(43 mph).

The tolerance is followed until a road sign with
a lower or higher speed is passed - then the
car follows the new signed speed limit instead
and the tolerance is deleted from the memory.

NOTE

The maximum selectable tolerance is
+/- 10 km/h (5 mph).

Related information

•

Automatic speed limiter (p. 308)

•

Limitations for automatic speed limiter
(p. 311)

•

Road Sign Information

*

 (p. 298)

Limitations for automatic speed

limiter

Automatic speed limitation (ASL

39

) takes

place using speed information from the Road
Sign Information function

*

 (RSI

40

) – not from

the speed limit road signs that the car
passes.

If road sign information cannot interpret and
provide speed information to the driver sup-
port systems, the automatic speed limiter is
set in standby mode and changes to normal
speed limiter. In such cases the driver must
intervene and brake to a suitable speed.

The automatic speed limiter will be reactivated
when road sign information can once again
interpret and provide speed information.

Related information

•

Speed limiter (p. 305)

•

Automatic speed limiter (p. 308)

•

Road Sign Information

*

 (p. 298)

38

Automatic Speed Limiter

39

Automatic Speed Limiter

40

Road Sign Information – RSI

DRIVER SUPPORT

* Option/accessory.

312

Cruise control

The cruise control (CC

41

) helps the driver

maintain an even speed, which can result in
more relaxed driving on motorways and long,
straight roads in regular traffic flows.

Buttons and symbols for the function

: Activates cruise control from standby

mode and resumes stored speed

: Increases the stored speed

: 

From standby mode

 – activates

cruise control and stores current speed

: 

From active mode

 – deactivates/

changes cruise control to standby mode

: Reduces stored speed

Marker for stored speed

The car's current speed

Stored speed

NOTE

In cars equipped with adaptive cruise con-
trol

*

 (ACC

42

), it is possible to switch

between cruise control and adaptive cruise
control.

WARNING

•

The function is supplementary driver
support intended to facilitate driving
and make it safer – it cannot handle all
situations in all traffic, weather and
road conditions.

•

•

Driver support functions are not a sub-
stitute for the driver's attention and
judgement. The driver is always
responsible for ensuring the car is
driven in a safe manner, at the appro-
priate speed, with an appropriate dis-
tance to other vehicles, and in accord-
ance with current traffic rules and reg-
ulations.

Using engine braking instead of the
foot brake

With Cruise Control, speed is regulated with
less frequent application of the foot brake. On
a downhill gradient it may sometimes be
desirable to start moving a little faster and

41

Cruise Control

42

Adaptive Cruise Control

DRIVER SUPPORT

* Option/accessory.

313

limit the acceleration by engine braking. In this
case the driver can temporarily disable foot
brake application by Cruise Control.

To do so, proceed as follows:

–

Depress the accelerator pedal about half-
way down and release.
> Cruise Control will disengage its auto-

matic foot braking and then uses
engine braking only.

Related information

•

Driving support systems (p. 290)

•

Selecting and activating cruise control
(p. 313)

•

Deactivating cruise control (p. 314)

•

Standby mode for cruise control (p. 314)

•

Set the stored speed for driver support
(p. 342)

•

Change between cruise control and adap-
tive cruise control

*

 in the centre display

(p. 322)

Selecting and activating cruise

control

The cruise control function (CC

43

) must first

be selected and activated in order to be able
to regulate the speed.

In order to start the cruise control from the
standby mode, the car's current speed must
be 30 km/h (20 mph) or higher.

1. Press 

◀

 (1) or 

▶

 (3) to scroll to the symbol

for cruise control 

 (4).

> The symbol is grey – cruise control is in

standby mode.

2. When cruise control is selected – press

the steering wheel button 

 (2) to acti-

vate.
> The symbol is white – cruise control is

started and the current speed is stored
as maximum speed. The lowest speed
that can be stored is 30 km/h
(20 mph).

Reactivating cruise control to the last
stored speed

–

When cruise control is selected – press
the steering wheel button 

 to activate.

> The cruise control markings and sym-

bols in the driver display change colour
from GREY to WHITE — the car will
now follow the most recently stored
speed again.

WARNING

A significant increase in speed may follow
when the speed is resumed with the 

steering wheel button.

Related information

•

Cruise control (p. 312)

•

Deactivating cruise control (p. 314)

•

Standby mode for cruise control (p. 314)

43

Cruise Control