Volvo V90 Twin Engine (2020 year). Manual in english - page 21

DRIVER SUPPORT

}}

* Option/accessory.

363

Cross Traffic Alert

*

88

Cross Traffic Alert (CTA) is a driver support
that supplements BLIS

89

 and is designed to

help the driver detect traffic crossing behind
the car when it is reversing.

The 

auto-brake

 subfunction can help the

driver to stop the car in the event of a risk of
collision with an unobserved vehicle.

Examples of areas where CTA can assist the driver to

detect obstacles during reversing.

CTA supplements BLIS by detecting the
approach of crossing traffic during reversing,
such as when reversing out of a parking
space.

CTA is primarily designed to detect vehicles. In
favourable conditions it may also be able to

detect smaller objects, such as cyclists and
pedestrians.

CTA is only active if the car rolls backwards or
if reverse gear has been selected.

If CTA senses that something is approaching
from the side, this is also indicated with:

•

an acoustic signal - the sound is heard in
the left-hand or right-hand speaker
according to the direction from which the
object approaches.

•

an illuminated icon in the 

Park Assist

System

 graphic on the screen.

•

an icon on the Park assist camera top
view.

Illuminated icon for CTA in the 

Park Assist

System

 graphic on the screen.

If the driver does not observe the warning
from CTA and a collision is unavoidable, the

auto-brake

 function takes effect to stop the

car, after which the driver display shows an
explanatory text message on why the car was
braked.

WARNING

•

The function is supplementary driver
support intended to facilitate driving
and make it safer – it cannot handle all
situations in all traffic, weather and
road conditions.

•

•

Driver support functions are not a sub-
stitute for the driver's attention and
judgement. The driver is always
responsible for ensuring the car is
driven in a safe manner, at the appro-
priate speed, with an appropriate dis-
tance to other vehicles, and in accord-
ance with current traffic rules and reg-
ulations.

88

Cross traffic alert when the car is reversing.

89

Blind Spot Information

||

DRIVER SUPPORT

* Option/accessory.

364

Related information

•

Driving support systems (p. 282)

•

Activating or deactivating Cross Traffic
Alert

*

 (p. 364)

•

Limitations of Cross Traffic Alert

*

 (p. 364)

•

Messages for Cross Traffic Alert

*

 (p. 366)

•

BLIS

*

 (p. 359)

•

Park Assist

*

 (p. 389)

Activating or deactivating Cross

Traffic Alert

*

90

The driver can select to switch off the 

warn-

ing

 in the Cross Traffic Alert (CTA) function –

the 

auto brake

 subfunction cannot be

switched off, however, and continues to be
active.

Activate or deactivate the
function using this button in
the centre display's function
view.

•

GREEN button indication – the function is
activated.

•

GREY button indication – warning signal
and indication on display for the function
is deactivated.

The function is activated automatically each
time the engine is started.

Related information

•

Cross Traffic Alert

*

 (p. 363)

•

Limitations of Cross Traffic Alert

*

 (p. 364)

Limitations of Cross Traffic Alert

*

91

The Cross Traffic Alert (CTA) function with

auto-brake

 may have limited functionality in

certain situations. Brake intervention is active
at speeds below 15 km/h.

WARNING

The 

auto-brake

 subfunction can only

detect and brake for other vehicles that are

moving – 

not

 for stationary obstacles, a

cyclist or a pedestrian, for example.

CTA has a certain limitation – the CTA sensors
cannot "see" through other parked vehicles or
obstructions, for example.

Here are some examples of situations where
CTA’s "field of vision" may be already limited
and approaching vehicles cannot therefore be
detected until they are very close:

90

Cross traffic alert when the car is reversing.

91

Cross traffic alert when the car is reversing.

DRIVER SUPPORT

* Option/accessory.

365

The car is parked deep inside a parking slot.

In an angled parking slot CTA may be completely

“blind” on one side.

Blind CTA sector.

Sector in which CTA can detect/“see”.

However, as your car slowly reverses, the
angle it makes with the obstructing vehicle/

object changes and the blind sector rapidly
decreases.

Examples of further limitations

•

The 

auto-brake

 subfunction only detects

moving vehicles and therefore 

cannot

"see" and brake for stationary obstacles, a
cyclist or a pedestrian, for example.

•

Dirt, ice and snow covering the sensors
may reduce the functions and deactivate
alerts.

•

CTA is automatically deactivated if a
trailer, bicycle rack or similar is connected
to the car's electrical system.

•

For good performance of CTA, there
should be no bicycle rack, luggage carrier
or similar mounted on the car's towbar.

NOTE

This function uses the car's camera and
radar units, which have certain general lim-
itations.

Related information

•

Cross Traffic Alert

*

 (p. 363)

•

Limitations for camera and radar unit
(p. 339)

DRIVER SUPPORT

* Option/accessory.

366

Messages for Cross Traffic Alert

*

92

A number of messages regarding Cross
Traffic Alert (CTA) can be shown in the driver
display. Here are some examples.

Message

Specification

Blind spot sensor

Service required

The system does not function as it should. A workshop should be contacted

A

.

Blind spot system off

Trailer attached

BLIS

B

 and CTA have been deactivated as a trailer has been connected to the car's electrical system.

A

An authorised Volvo workshop is recommended.

B

Blind Spot Information System

A text message can be cleared by briefly
pressing the 

 button, located in the centre

of the steering wheel's right-hand keypad.

If a message persists, contact a workshop

A

.

Related information

•

Cross Traffic Alert

*

 (p. 363)

•

BLIS

*

 (p. 359)

•

Limitations of Cross Traffic Alert

*

 (p. 364)

92

Cross traffic alert when the car is reversing.

DRIVER SUPPORT

* Option/accessory.

367

Road Sign Information

*

The Road Sign Information function (RSI

93

)

can help the driver to observe speed-related
road signs and certain prohibition signs.

Examples of readable signs

94

.

RSI can provide information about such things
as current speed, when a motorway or road is
starting/ending, when overtaking is prohibited
or when the direction of travel is one-way.

If the car passes a speed limit sign, it will be
shown on the driver's display and the head-up
display

*

.

NOTE

In certain markets, the Road Sign Informa-
tion function

*

 is only available in combina-

tion with Sensus Navigation

*

.

WARNING

•

The function is supplementary driver
support intended to facilitate driving
and make it safer – it cannot handle all
situations in all traffic, weather and
road conditions.

•

•

Driver support functions are not a sub-
stitute for the driver's attention and
judgement. The driver is always
responsible for ensuring the car is
driven in a safe manner, at the appro-
priate speed, with an appropriate dis-
tance to other vehicles, and in accord-
ance with current traffic rules and reg-
ulations.

Related information

•

Driving support systems (p. 282)

•

Activating or deactivating road sign infor-
mation

*

 (p. 368)

•

Display mode for road sign information

*

(p. 368)

•

Road Sign Information and Sensus
Navigation

*

 (p. 371)

•

Warning for speed limitation and speed
camera from road sign information

*

(p. 371)

•

Limitations of Road Sign Information

*

(p. 373)

93

Road Sign Information

94

Road signs are market-dependent - illustrations in these instructions only show a few examples.

DRIVER SUPPORT

* Option/accessory.

368

Activating or deactivating road

sign information

*

The Road Sign Information function (RSI

95

) is

optional – the driver can choose to activate or
deactivate this function.

Activate or deactivate the
function using this button in
the centre display's function
view.

•

GREEN button indication – the function is
activated.

•

GREY button indication – the function is
deactivated.

NOTE

•

If the automatic speed limiter function
is activated, road sign information is
shown in the driver display even if the
Road Sign Information function is not
activated.

•

To remove road sign information from
the driver display, you must deactivate

both

 the automatic speed limiter and

Road Sign Information.

•

When the automatic speed limiter
function is activated but Road Sign
Information is deactivated, no warn-
ings are given from Road Sign Infor-
mation. Road Sign Information must
also be activated in order to receive
warnings.

Related information

•

Road Sign Information

*

 (p. 367)

•

Automatic speed limiter (p. 295)

•

Limitations of Road Sign Information

*

(p. 373)

Display mode for road sign

information

*

The Road Sign Information function (RSI

96

)

shows road signs in different ways depend-
ing on the sign and the situation.

Example

97

 of detected speed information.

When the function detects a road sign with an
imposed speed limit, the driver display shows
the sign as a symbol combined with a col-
oured indication on the speedometer.

If the car is fitted with Sensus Navigation

*

,

speed-related information is also obtained
from map data, which means that the driver
display can show or change information on
the speed limit without having passed a
speed-related sign.

95

RSI: Road Sign Information.

96

Road Sign Information

97

Road signs are market-dependent - the illustrations in these instructions only show examples.

DRIVER SUPPORT

}}

* Option/accessory.

369

An additional

97

 sign, such as

"no overtaking", may be
shown together with the
speed limit symbol.

If the driver enters a road
marked with a no-entry sign
at the roadside, the symbol
for this sign

97

 flashes on and

off on the driver display as a
warning.

If the car is equipped with Sensus Navigation

*

,

information from map data is used to deter-
mine whether the car is being driven in the
wrong direction.

The driver can also get an acoustic warning
when driving towards a road marked with a
no-entry sign if the 

Road Sign Audio

Warning

 function is activated.

Speed limit or end of motorway

When the function detects an "indirect speed
limit sign" stating the end of the current speed
limit – e.g. at the end of a motorway – a sym-
bol appears with the corresponding road sign
in the driver's display.

If the car is equipped with Sensus Navigation

*

,

direct speed limit signs are normally displayed

– indirect speed limit signs are only displayed
if map data has no information on the speed
limit for the road section in question.

Example of indirect speed limit sign

97

:

End of all restrictions.

End of motorway.

The driver display symbol extinguishes after
10-30 seconds and remains so until the next
speed related sign is passed.

Changed speed limit

When passing a direct speed limit sign when a
speed limit changes, a symbol with the corres-
ponding road sign appears in the driver's dis-
play.

Example of direct speed limit
sign

97

.

The driver display symbol extinguishes after
about 5 minutes until the next speed-related
sign is passed.

If the car is fitted with Sensus Navigation

*

,

speed limit signs are shown in the driver dis-
play when map data contains information on
the speed limit for the road section in ques-
tion, even if no direct sign has been passed. If
there is no information in map data, the sign
goes off after approx. 3 minutes after the last
passing of a speed limit sign.

97

Road signs are market-dependent - the illustrations in these instructions only show examples.

||

DRIVER SUPPORT

* Option/accessory.

370

Additional signs

Examples of additional signs

97

.

Sometimes different speed limits are signed
for the same road - an additional sign then
indicates the circumstances under which the
different speeds apply. The road section may
be particularly susceptible to accidents in rain
and/or fog, for example.

An additional sign relating to rain is displayed
only if the windscreen wipers are in use.

If a trailer is connected to the car's electrical
system and you pass a speed sign with the
additional sign "trailer", the indicated speed
will appear on the driver display.

Some speed limits only apply
after a certain distance or at a
certain time of day. The driv-
er's attention is drawn to this
fact by means of a symbol for
an additional sign below the
speed symbol. The additional

symbol in the driver display will show either
“DIST” or “TIME”.

A symbol for additional sign
in the form of an empty frame
under the driver display's
speed symbol

97

 means that

the function has detected an
additional sign with supple-
mentary information for the

current speed limit.

Sign for "School" and "Children at
play"

If a warning sign

97

 for

"School" or "Children at play"
is included in the satellite
navigator's map data

98

, the

driver display shows a sign of
this type.

Related information

•

Road Sign Information

*

 (p. 367)

•

Limitations of Road Sign Information

*

(p. 373)

97

Road signs are market-dependent - the illustrations in these instructions only show examples.

98

Only in cars with Sensus Navigation

*

.

DRIVER SUPPORT

}}

* Option/accessory.

371

Road Sign Information and Sensus

Navigation

*

If the car is equipped with Sensus Navigation

*

,

speed information is read from the navigation
unit in the following cases:

•

On detection of signs that indirectly indi-
cate a speed limit, such as motorway, dual
carriageway and city limit signs.

•

If a previously detected speed sign is
assumed not to apply any longer, but no
new sign has been detected.

NOTE

In certain markets, the Road Sign Informa-
tion function

*

 is only available in combina-

tion with Sensus Navigation

*

.

NOTE

If a downloaded third-party app is used for
navigation then there is no support for
speed-related information.

Related information

•

Road Sign Information

*

 (p. 367)

Warning for speed limitation and

speed camera from road sign

information

*

Road sign information (RSI

99

) includes sub-

functions that can warn the driver if a speed
limit has been exceeded or in connection with
speed cameras.

Examples of information on speed camera and speed

limit in the driver display.

Speed Limit Warning

The speed warning is given
by the driver display sym-
bol

100

 showing the applicable

maximum permitted speed
temporarily flashing when
this speed is exceeded.

A speed warning is always given if the speed
limit is exceeded in connection with speed
camera information.

Speed Limit Warning

 warns the driver when

the applicable speed limit or a preselected
"top speed" is exceeded – this warning is
repeated once after approx. 1 minute within
the same speed limit area unless the driver
reduces the speed.

A new warning for exceeding the speed limit,
including a reminder, will be given only when
the car reaches a new/different speed limit
area.

NOTE

To get an acoustic warning if you exceed
the required speed, the 

Speed Limit

Warning

 function must be activated and

the 

Road Sign Audio Warning

 subfunc-

tion must be set to 

On

. An acoustic warn-

ing is then given if the car's speed exceeds
the speed indicated by the Road Sign
Information function in the driver display.

99

Road Sign Information

100

Road signs are customised for each market – the one shown here is just an example.

||

DRIVER SUPPORT

* Option/accessory.

372

Warning for speed camera

A car equipped with road
sign information and Sensus
Navigation can provide infor-
mation on an upcoming
speed camera in the driver
display.

101

If the car exceeds a detected speed limit with
the 

Speed Limit Warning

 function activated,

a speed warning is given when the car
approaches a speed camera, provided that the
navigation map for the area in question con-
tains information on speed cameras.

NOTE

An option is available to receive an acous-
tic warning for speed cameras independ-
ently of the car's speed and exceeded
speed limit, and even if the 

Road Sign

Audio Warning

 function is deactivated.

Related information

•

Road Sign Information

*

 (p. 367)

•

Activating or deactivating warnings from
road sign information

*

 (p. 372)

•

Limitations of Road Sign Information

*

(p. 373)

Activating or deactivating

warnings from road sign

information

*

The subfunction 

Speed Limit Warning

 for

Road Sign Information (RSI

102

) is optional –

the driver can choose to activate or deacti-
vate this subfunction.

Activating speed warning

1. Select 

Settings

My Car

IntelliSafe

Road Sign Information

 in the centre

display's top view.

2. Select 

Speed Limit Warning

.

> The function is activated and a speed

limit selector appears.

Adjust the limit for Speed Warning

The driver can select to receive a warning at a
higher speed than the signed speed.

Select limit for speed warning as follows:

1. Select 

Settings

My Car

IntelliSafe

Road Sign Information

 in the centre

display's top view.

2. Select 

Speed Limit Warning

.

> The function is activated and a speed

limit selector appears.

3. Adjust the limit for Speed Warning by

pressing the up/down arrows on the
screen.

Note that the function does
not give any consideration to
selected limit adjustment
when the driver display
shows the speed camera
symbol.

Activating acoustic warning in
connection with speed warning.

Change setting for acoustic warning as fol-
lows:

1. Select 

Settings

My Car

IntelliSafe

Road Sign Information

 in the centre

display's top view.

2. Select/deselect 

Road Sign Audio

Warning

 to activate/switch off the acous-

tic warning.

With the 

Road Sign Audio Warning

 function

activated, the driver is also warned when driv-
ing towards one-way traffic/no-entry entrance.

Activate Speed camera warning

If the car is fitted with Sensus Navigation

*

 and

map data contains information on speed cam-

101

Information on speed cameras on the navigation map is not available for all markets/areas.

102

Road Sign Information

DRIVER SUPPORT

* Option/accessory.

373

eras, the driver can opt to receive an audible
warning when approaching a speed camera.

Change setting for acoustic warning as fol-
lows:

1. Select 

Settings

My Car

IntelliSafe

Road Sign Information

 in the centre

display's top view.

2. Select/deselect 

Speed Camera Audio

Warning

 to activate/switch off the audi-

ble speed camera warning.

Related information

•

Road Sign Information

*

 (p. 367)

•

Warning for speed limitation and speed
camera from road sign information

*

(p. 371)

•

Limitations of Road Sign Information

*

(p. 373)

Limitations of Road Sign

Information

*

The Road Sign Information (RSI

103

) function

may have limitations in certain situations.

Examples of what can reduce the function are
as follows:

•

Faded signs

•

Signs positioned on bends

•

Rotated or damaged signs

•

Signs positioned high above the roadway

•

Fully/partially obscured or poorly posi-
tioned signs

•

Signs completely or partly covered with
frost, snow and/or dirt

•

Digital road maps

104

 are out-of-date, inac-

curate or have no speed information

105

.

NOTE

In certain markets, the Road Sign Informa-
tion function

*

 is only available in combina-

tion with Sensus Navigation

*

.

NOTE

The RSI function may interpret some types
of bicycle rack, connected to the electrical
socket for trailers, as a connected trailer. In
such cases, the driver display may show
incorrect speed information.

NOTE

This function uses the car's camera and
radar units, which have certain general lim-
itations.

Related information

•

Road Sign Information

*

 (p. 367)

•

Limitations for camera and radar unit
(p. 339)

103

Road Sign Information

104

In cars equipped with Sensus Navigation

*

.

105

Map data with speed information does not exist for all areas.

DRIVER SUPPORT

* Option/accessory.

374

Driver Alert Control

The Driver Alert Control (DAC) function is
intended to help make the driver aware that
he or she is starting to drive less consistently,
e.g. if the driver becomes distracted or starts
to fall asleep.

The objective for DAC is to detect slowly dete-
riorating driving ability and it is primarily
intended for major roads. The function is not
intended for city traffic.

The function is activated when speed exceeds
65 km/h (40 mph) and remains active as long
as the speed is over 60 km/h (37 mph).

DAC reads the position of the car in the lane.

A camera detects the edge markings painted
on the carriageway and compares the align-
ment of the road with the driver’s steering
wheel movements.

The car is being driven erratically in the lane.

If driving behaviour becomes
noticeably inconsistent, the
driver is alerted by this sym-
bol in the driver display, com-
bined with an acoustic signal
and the text message 

Time

to take a break

.

If the car is equipped with Sensus Navigation

*

and has the function 

Rest Stop Guidance

activated, suggestions for an appropriate
place for a break are also displayed.

The warning is repeated after a time if driving
behaviour has not improved.

WARNING

Driver Alert Control should not be used to

extend a period of driving. The driver

should instead plan for breaks at regular

intervals and make sure they are well

rested.

WARNING

An alarm from Driver Alert Control should

be taken very seriously, as a sleepy driver is

often not aware of his/her own condition.
If the alarm sounds or you feel fatigued:

•

Stop the car safely as soon as possible
and rest.

Studies have shown that it is just as dan-

gerous to drive while tired as it is to drive

under the influence of alcohol or other

stimulants.

DRIVER SUPPORT

* Option/accessory.

375

WARNING

•

The function is supplementary driver
support intended to facilitate driving
and make it safer – it cannot handle all
situations in all traffic, weather and
road conditions.

•

•

Driver support functions are not a sub-
stitute for the driver's attention and
judgement. The driver is always
responsible for ensuring the car is
driven in a safe manner, at the appro-
priate speed, with an appropriate dis-
tance to other vehicles, and in accord-
ance with current traffic rules and reg-
ulations.

Related information

•

Driving support systems (p. 282)

•

Activating or deactivating Driver Alert
Control (p. 375)

•

Select rest stop guidance in the event of a
warning from Driver Alert Control (p. 375)

•

Limitations of Driver Alert Control (p. 376)

Activating or deactivating Driver

Alert Control

The Driver Alert Control (DAC) function can
be activated or deactivated.

1. Tap on 

Settings

 in the centre display's

top view.

2. Select 

My Car

IntelliSafe

Driver

Alert Control

.

3. Select or deselect 

Alertness Warning

 to

activate or deactivate the function.

Related information

•

Driver Alert Control (p. 374)

•

Limitations of Driver Alert Control (p. 376)

Select rest stop guidance in the

event of a warning from Driver

Alert Control

In cars equipped with Sensus Navigation

*

,

the driver can activate a guide that can auto-
matically suggest an appropriate rest area
when Driver Alert Control (DAC) issues a
warning.

It is possible to select whether the 

Rest Stop

Guidance

 function should be activated or

deactivated.

1. Tap on 

Settings

 in the centre display's

top view.

2. Select 

My Car

IntelliSafe

Driver

Alert Control

.

3. Select or deselect 

Rest Stop Guidance

to activate or deactivate the function.

Related information

•

Driver Alert Control (p. 374)

•

Limitations of Driver Alert Control (p. 376)

DRIVER SUPPORT

* Option/accessory.

376

Limitations of Driver Alert Control

The Driver Alert Control (DAC) function may
have limitations in certain situations.

In some cases the system may issue a warn-
ing despite driving ability not deteriorating, for
example:

•

in strong side winds

•

on rutted road surfaces.

WARNING

In some cases, driving behaviour is not

affected despite driver fatigue – e.g. when

using the Pilot Assist

*

 function – resulting

in the driver not getting a warning from

DAC.
It is therefore important to always stop and

take a break at the slightest feeling of fati-

gue, regardless of whether the function has

given a warning.

NOTE

This function uses the car's camera and
radar units, which have certain general lim-
itations.

Related information

•

Driver Alert Control (p. 374)

•

Limitations for camera and radar unit
(p. 339)

Lane assistance

The function of the Lane Keeping Aid
(LKA

106

) is to help the driver to reduce the

risk of the car accidentally leaving its own
lane on motorways and similar major routes.

Lane Keeping Aid steers the car back into its
lane and/or alerts the driver with vibrations in
the steering wheel.

Lane Keeping Aid is active within the speed
range 65–200 km/h (40–125 mph) on roads
with clearly visible side lines.

On narrow roads the function may be unavail-
able, in which case it goes into standby mode.
The function becomes available again when
the road is wide enough.

A camera reads the side lines of the road/lane.

Lane assistance steers the car back into its lane.

Lane assistance warns with steering wheel vibra-

tions.

106

Lane Keeping Aid

DRIVER SUPPORT

}}

377

Depending on settings, lane assistance acts in
accordance with the following:

•

Assist

 activated: When the car is

approaching a lane line, the function will
actively steer the car back into its lane by
applying a slight torque to the steering
wheel.

•

Warning

 activated: If the car is about to

cross a lane line, the driver is warned by
means of vibrations in the steering wheel.

There is also an option where both steering
assistance and warning are activated simulta-
neously.

NOTE

When a direction indicator/flasher is
switched on, there are no steering correc-
tions or alerts from lane assistance.

WARNING

•

The function is supplementary driver
support intended to facilitate driving
and make it safer – it cannot handle all
situations in all traffic, weather and
road conditions.

•

•

Driver support functions are not a sub-
stitute for the driver's attention and
judgement. The driver is always
responsible for ensuring the car is
driven in a safe manner, at the appro-
priate speed, with an appropriate dis-
tance to other vehicles, and in accord-
ance with current traffic rules and reg-
ulations.

Lane assistance does not intervene

Lane assistance does not engage on sharp inside

curves.

In some situations, lane assistance allows lane
lines to be crossed without intervening with
either steering assistance or a warning – e.g.
when using the direction indicators or cutting
bends.

Hands on the steering wheel

For steering assistance with lane assistance to
work, the driver must have his/her hands on
the steering wheel, which the system will con-
tinue to monitor.

If the driver does not keep
his/her hands on the steering
wheel, a warning signal is
heard and a message encour-
ages the driver to steer the
car actively:

||

DRIVER SUPPORT

378

•

Lane Keeping Aid

 

Apply steering

If the driver follows the prompt to start steer-
ing, the function is set in standby mode and
this message is shown:

•

Lane Keeping Aid

 

Standby until

steering applied

The function will then be unavailable until the
driver starts to steer the car again.

Related information

•

Driving support systems (p. 282)

•

Activating or deactivating lane assistance
(p. 378)

•

Limitations of Lane assistance (p. 379)

•

Symbols and messages for lane assis-
tance (p. 380)

Activating or deactivating lane

assistance

The Lane Keeping Aid (LKA) function (LKA

107

)

is optional – the driver can choose to activate
or deactivate this function.

Activate or deactivate the
function using this button in
the centre display's function
view.

•

GREEN button indication – the function is
activated.

•

GREY button indication – the function is
deactivated.

Related information

•

Lane assistance (p. 376)

•

Selecting assistance option for lane assis-
tance (p. 378)

•

Limitations of Lane assistance (p. 379)

Selecting assistance option for

lane assistance

The driver can select how the Lane Keeping
Aid (LKA

108

) should react if the car leaves its

lane.

1. Select 

Settings

My Car

IntelliSafe

in the centre display's top view.

2. In the event of 

Lane Keeping Aid Mode

,

select how the function should react:

•

Assist

 – the driver is given steering

assistance without a warning.

•

Both

 – the driver is given a warning

both from the steering wheel vibrating
and from steering assistance.

•

Warning

 – the driver is only warned by

steering wheel vibration.

Related information

•

Lane assistance (p. 376)

107

Lane Keeping Aid

108

Lane Keeping Aid