Toyota RAV4 Prime (2023 year). Manual in english

452

6-4. Using the other interior features

cies.

■

Important points of the wireless

charger

●

If the electronic key cannot be

detected within the vehicle inte-

rior, charging cannot be done.

When the door is opened and

closed, charging may be tempo-

rarily suspended.

●

When charging, the wireless

charging device and portable

device will get warmer, however

this is not a malfunction.

When a portable device gets

warm while charging, charging

may stop due to the protection

function on the portable device

side. In this case, when the tem-

perature of the portable device

drops significantly, charge again.

The fan may start operating to lower

the temperature inside the wireless

charger, however this is not a mal-

function.

■

Operation sounds

A buzzing noise may be heard when

pressing the power supply switch to

turn the power supply on, when

turning the power switch to ACC or

ON while the wireless charger

power supply is on, or when detect-

ing a portable device. However, this

is not a malfunction.

■

If the smartphone OS has been

updated

If the smartphone OS has been

updated to a newer version, its

charging specifications may have

changed significantly. For details,

check the information on the manu-

facturer’s website.

■

Trademark information

iPhone is a trademark of Apple Inc.,

registered in the U.S. and other

countries.

WARNING

■

Caution while driving

When charging a portable device,

for safety reasons, the driver

should not operate the main part

of the portable device while driv-

ing.

■

Caution while in motion

Do not charge lightweight devices

such as wireless headphones

while in motion. These devices

are very light and may be ejected

from the charging tray, which may

lead to unforeseen accidents.

■

Caution regarding interfer-

ence with electronic devices

People with implantable cardiac

pacemakers, cardiac resynchroni-

zation therapy-pacemakers or

implantable cardioverters, as well

as any other electrical medical

device, should consult their physi-

cian about the usage of the wire-

less charger.

■

To prevent malfunctions or

burns

Observe the following precau-

tions. Failure to do so may result

in a equipment failure and dam-

age, catch fire, burns due to over-

heat or electric shock.

●

Do not insert any metallic

objects between the charge

area and the portable device

while charging

●

Do not attach an aluminum

sticker or other metallic object to

the charge area

●

Do not attach an aluminum

sticker or other metallic object to

the side of the portable device

(or to its case or cover) that

touches the charge area

●

Do not use the charging tray as

a small storage space

453

6-4. Using the other interior features

Interior

featur

WARNING

●

Do not subject to a strong force

or impact

●

Do not disassemble, modify or

remove

●

Do not charge devices other

than specified portable devices

●

Keep away from magnetic items

●

Do not charge devices if the

charge area is covered in dust

●

Do not cover with a cloth or sim-

ilar material

NOTICE

■

Situations in which the func-

tion may not operate normally

Devices may not be charged nor-

mally in the following situations.

●

The portable device is fully

charged

●

The portable device is being

charged with a cable connected

●

There is foreign matter between

the charge area and portable

device

●

Charging has caused the porta-

ble device to heat up

●

The temperature around the

charging tray is 95°F (35°C) or

higher, such as in extreme heat

●

The portable device is placed

with its charging side facing up

●

When the charging coil for the

portable device is misaligned

from the charge area (In particu-

lar, small portable devices such

as foldable devices may be mis-

aligned from the charging area

while driving)

●

The portable device is larger

than the charging tray

●

The camera lens protrudes 3

mm (0.12 in) or more from the

surface of the portable device

●

The vehicle is in an area where

strong electrical waves or noise

are emitted, such as near a tele-

vision tower, power plant, gaso-

line station, broadcasting

station, large display, airport,

etc.

●

Any of the following objects that

is 0.08 in (2 mm) or thicker is

between the charging side of

the portable device and the

charge area

• Thick cases or covers

• Thick decorations

• Accessories, such as finger

rings, straps, etc.

●

When the portable device is in

contact with, or is covered by

any of the following metallic

objects:

• A card that has metal on it, such

as aluminum foil, etc.

• A pack of cigarettes that

includes aluminum foil

• A wallet or bag that is made of

metal

• Coins

• A heating pad

• CDs, DVDs or other media

• A metal accessory

• A case or cover made of metal

• Casing which has magnet in it

on the charging side of the por-

table device

454

6-4. Using the other interior features

Fold down the armrest for use.

An assist grip installed on the
ceiling can be used to support
your body while sitting on the
seat.

NOTICE

●

Electric wave type wireless

remote controls are being used

nearby

●

The electronic key is not inside

the vehicle

●

2 or more portable devices are

placed on the charging tray at

the same time

If charging is abnormal or the

operation indicator light contin-

ues to flash for any other reason,

the wireless charger may be mal-

functioning. Contact your Toyota

dealer.

■

To prevent malfunctions and

data corruptions

●

When charging, bringing a

credit, or other magnetic card,

or magnetic storage media

close to the charge area may

clear any stored data due to

magnetic influence. Also, do not

bring a wristwatch or other pre-

cision instrument close to the

charge area since doing so may

cause it to malfunction.

●

Do not charge with a non-con-

tact IC card such as a transpor-

tation system IC card inserted

between the charging side of a

portable device and the charge

area. The IC chip may become

extremely hot and damage the

portable device or IC card. Be

especially careful not to charge

a portable device inside a case

or cover with a non-contact IC

card attached.

●

Do not leave portable devices

inside the vehicle. The inside of

the vehicle can become hot in

extreme heat, which could

cause a malfunction.

■

To prevent 12-volt battery dis-

charge

Do not use the wireless charger

for a long period of time when the

hybrid system is stopped.

Armrest

NOTICE

■

To prevent damage to the

armrest

Do not apply too much load on the

armrest.

Assist grips

455

6-4. Using the other interior features

Interior

featur

The coat hooks are provided
with the rear assist grips.

: If equipped

■

The power outlet (120 VAC) can

be used when

●

“READY” indicator is illuminated.

●

When using “My Room Mode”

(



P.148)

■

The power outlet (120 VAC)

●

Use electrical devices that do not

exceed a total maximum power

usage of 1500 W at AC 120 V for

the power outlet (AC 120 V/1500

W). If electrical devices exceeding

the specified capacity are used,

the protection function will activate

and prevent the power outlet from

being used.

●

Some electrical devices with high

power consumption (such as an

electric griddle) may need to use

the power outlet solely. In this

case, do not use such a device

together with other devices.

●

When power is supplied to multi-

ple devices, some devices may

not operate properly. In this case,

use the device solely.

●

While the power outlet is used, a

large current may flow causing the

current power to exceed 1500 W

depending on the electrical device

used. In this situation, the protec-

WARNING

■

Assist grips

Do not use the assist grip when

getting in or out of the vehicle or

rising from your seat.

NOTICE

■

To prevent damage to the

assist grip

Do not hang any heavy object or

put a heavy load on the assist

grip.

Coat hooks

WARNING

■

Items that must not be

hanged on the hook

Do not hang coat hangers or

other hard or sharp objects on the

hook. If the SRS curtain shield air-

bags deploy, these items may

become projectiles, causing death

or serious injury.

Power outlet (AC 120

V/1500 W)

Please use a power supply
for electronic goods that
use less than 120 VAC
(power consumption of
1500 W).

When using electronic goods,
make sure that the power con-
sumption of all the connected
power outlets is less than
1500 W. (



P.460)

456

6-4. Using the other interior features

tion function may activate and

stop the power supply function.

●

Certain types of electrical devices

may disturb TV or radio by noises.

●

Noise may be heard from the cool-

ing fan under the rear seats when

using the power outlet, but this is

not a malfunction.

■

120 VAC Devices which may

not operate properly

The following electrical devices may

not operate properly even if their

total power consumption is less than

1500 W.

●

Devices with high initial peak watt-

age

●

Devices that require larger power

consumption than described in the

instruction manual of the electrical

device.

●

Measuring devices that process

precise data

●

Devices that require an extremely

stable power supply

●

Devices that require a constant

power supply from the power out-

let, such as a device with a timer.

■

When using the power outlet

while the vehicle is parked or

stopped

●

The doors cannot be locked or

unlocked using the smart key sys-

tem.

●

The doors cannot be locked or

unlocked using the electronic key.

The doors can only be locked or

unlocked using the mechanical

key (



P.567).

●

A buzzer may sound or “Key Not

Detected Check Key Location”

may be displayed on the multi-

information display when the door

is opened or closed. Make sure to

carry the electronic key on your

person.

WARNING

■

For safe use

Observe the following precau-

tions.
Failure to do so may lead to an

accident, resulting in death or

serious injury.

●

Do not allow persons unfamiliar

with the system, such as a child,

to use the power outlet by them-

selves.

●

Do not disconnect the plug of a

device while your hands are wet

or insert a pin or other object

into the power outlet. Also, if a

liquid or snow is on the power

outlet, dry the outlet before

using it.

●

Do not attempt to modify, disas-

semble or repair a power outlet.

For information on repairs, con-

tact your Toyota dealer.

●

Keep the power outlet free of

dust and foreign matter. Also,

make sure to clean the power

outlet periodically.

●

Hold the plug by its body when

inserting or removing the plug

into or from the power outlet. Do

not touch the plug blades. Pull-

ing the cord to remove the

power source plug may damage

the plug or cord.

●

If any abnormal heat is felt in

the cord or outlet, stop using it

immediately. Also, observe the

following precautions to pre-

vent abnormal heat from being

generated from the cord or

power outlet.

457

6-4. Using the other interior features

Interior

featur

WARNING

• Do not connect multiple

branched power outlets, such

as a two-way socket, to the

power outlet

• When using a cord reel, pull all

of the cord out from the reel

●

When using a device with a

ground wire, use a conversion

adapter to connect the ground

wire to the ground terminal of

the adapter.

●

If the plug of a device fits

loosely in a power outlet, even

though it is fully inserted,

replace the power outlet. For

information on replacement,

contact your Toyota dealer.

■

Devices to be connected

●

Make sure to read any instruc-

tion manual which came with a

device and observe any warn-

ings on the device.

●

Do not connect a device to a

power outlet if the device is mal-

functioning or its plug is dam-

aged.

●

When the outside temperature

is extremely low or high, the

device may not operate properly

or may malfunction.

●

Electrical devices that require

horizontal setting may not oper-

ate properly.

●

Except in the case of waterproof

electrical devices, do not use

electrical devices in locations

exposed to rain or water, or in

high humidity.

●

Do not use electrical devices

that are or may be submerged

or immersed in water.

●

Do not use medical devices

because the power supply func-

tion may be stopped temporarily

depending on the vehicle condi-

tion.

■

Using the power outlet while

parked or stopped

●

The power outlets are for use in

directly connecting electrical

devices such as lights. Do not

use the power outlets as gener-

ators to supply power to a

house, etc. To use this as a

power supply system for emer-

gency use (for example, as a

dedicated system that can be

connected to an external power

source, or as a system where

the supply circuit from the exter-

nal power source is separate

from the electric wiring from the

power company) for a house,

etc., consult with the manufac-

turer or dealer of this system.

●

While using the power outlet,

make sure to securely engage

the parking brake and not to

shift the shift lever from P. The

vehicle may move unexpect-

edly, possibly resulting in an

accident.

458

6-4. Using the other interior features

WARNING

●

Do not leave the vehicle unat-

tended while using the power

outlet.

●

Do not use the power outlet

during weather with a possibility

of lightning. If you notice light-

ning while using the power out-

let, stop using it.

●

Do not use the power outlet if

the vehicle has a vehicle cover

installed.

●

Be especially careful when

using an electrical device such

as a heater and sleeping in the

vehicle. The device may stop

unexpectedly due to operations

such as an automatic stop of

the power supply system.

●

Do not use while the vehicle is

stopped on a slope or other

slanted location. Do not move or

tilt the vehicle during use.

●

Observe the following precau-

tions when using the power out-

let with the cord pulled outside

of the vehicle.

• Be careful of entry of rain or

water. If the power outlet

becomes wet, dry the outlet

before using.

• Prevent the cord from being

caught in the window or door

• Provide some slack in the cord

and do not pull it too tight

• Make sure not to start the vehi-

cle

●

Do not refuel or wash the vehi-

cle during use.

●

Make sure that the hood is

closed. As the engine will start

automatically depending on the

condition of the vehicle, make

sure that nothing is left near or

contacting the exhaust pipes.

Also, do not put your head or

hands anywhere inside the

engine compartment, as the

cooling fan may operate sud-

denly. Keep hands and clothing

(especially a tie, scarf, etc.)

away from the fan as they may

get caught in a fan.

●

Do not stop the vehicle near

objects which burn easily. If the

exhaust system is extremely

hot, it may cause a fire.

●

The gasoline engine starts auto-

matically when the remaining

charge of the hybrid battery

(traction battery) decreases.

When using a power outlet in an

area with poor ventilation or an

enclosed area, such as a

garage or a place where snow

has piled up, properly use an air

intake and exhaust device to

prevent lack of oxygen and full-

ness of exhaust gas. If such

device cannot be used, do not

use the power outlet.

■

When using the power outlet

while driving

●

Do not use devices such as the

following when driving. Also, do

not use a device if it cannot be

secured within the vehicle.

• Devices which may distract the

driver and be a hinderance to

safe driving, such as a TV, DVD

player, etc.

459

6-4. Using the other interior features

Interior

featur

Make sure to check the follow-
ings before using the power out-
let.



Park the vehicle in a well-ven-
tilated area, avoiding loca-
tions with poor ventilation
such as garages, as the
engine may start while the
system is operating.



Park the vehicle on a hard,
flat surface



Close the hood

WARNING

• When the device is not com-

pletely secured and may fall

over in the event of sudden

braking or a collision

• When the device may fall result-

ing on an accident, or may gen-

erate heat resulting in a fire

• When there is a risk of burns,

etc. (a toaster, microwave, elec-

tric heater, electric kettle, coffee

maker, etc.)

• Devices which may fall under

the pedals and prevent the

brake pedal from being

depressed, such as a hair dryer,

AC adaptor, mouse, etc.

●

Do not use devices which pro-

duce steam while the windows

are closed. Doing so may cause

the windows to fog up, reducing

visibility and making it difficult to

drive safely. Also, the steam

may damage or negatively

affect other devices. If the

device must be used, stop the

vehicle and open the windows

before use.

NOTICE

■

To avoid short circuit or mal-

function

Observe the following precau-

tions. Failure to do so may lead to

the power outlet not operating

correctly or damage to the vehicle

or a connected device.

●

Do not set a toaster or other

device which generates heat

near the interior components or

on a seat. Heat may cause

these parts to melt or burn.

●

Do not use devices which are

sensitive to vibration or heat in

the vehicle. These devices may

malfunction due to vibration

while driving or heat while the

vehicle is parked in the sun.

●

When not using a power outlet,

make sure to close the cover. If

foreign matter or a liquid enters

the power outlet, it may cause a

malfunction or short circuit.

■

Using the power outlet while

parked or stopped

●

Water may leak from the

exhaust pipe while the engine

running if the power outlet is

used for a long time. However,

this is not a malfunction.

●

At extremely low temperatures,

water may freeze in the exhaust

pipe and make it difficult to start

the engine, or an odor may

come from the exhaust pipe. In

this case, stop using the power

outlet, and then drive the vehi-

cle for 15 to 30 minutes.

Before using the power
outlet while the vehicle is
stopped

460

6-4. Using the other interior features



Set the parking brake



Shift the shift lever to P



Turn the power switch to OFF



Do not leave any valuables in
the vehicle or luggage com-
partment, in order to prevent
theft. The alarm system can-
not be set while supplying
power.

Power switch (



P.304)

AC 120 V switch

Power outlet

Ground terminal

Check that the parking brake
is engaged, securely depress
the brake pedal and press
the power switch (



P.304).

Check that the READY indi-
cator is illuminated, and
press the AC 120 V switch.

The power outlet can be used when

the indicator on the AC 120 V

switch is illuminated.
The power outlet are turned off/on

each time the AC 120 V switch is

pressed.

Observe the precautions
described in the instructions of
the electrical device.

Before connecting the plug to
the power outlet, check that
the power of the electrical
device is turned off.

Open the lid, and fully and
securely insert the plug of the
device into the power outlet.
Make sure that the power
source plug is not incom-

Name for all parts

When turning the power
outlet on

When connecting a
device

461

6-4. Using the other interior features

Interior

featur

pletely inserted.
In the following situations,
use an extension cord etc to
connect the power source
plug securely.

• The plug is large and cannot

be securely inserted all the
way into the power outlet

• The plug is heavy and may

disconnect from the power
outlet

When using a device with a ground
wire, use a conversion adapter to
connect the ground wire to the
ground terminal.

Turn the connected devices
off.

Press the AC 120 V switch to
turn the power outlet off.

Disconnect each plug from
the power outlet.

Close the lid of the power
outlet.

: If equipped

When power supply does not
start, even though the normal
procedure is followed, check
each of the following items.

When turning the power
outlet off

When the power outlet
(AC 120 V 1500 W)

cannot be used prop-

erly

When the power outlet can-
not be used, even though
the normal procedure is fol-
lowed, check the following
items.

When the power outlet
cannot be used properly

Likely cause

Correction pro-

cedure

Quantity of fuel
remaining is low
and the remain-
ing charge of the
hybrid battery
(traction battery)
is insufficient

After refueling,
drive for a while
to restore the
remaining
charge of the
hybrid battery
(traction bat-
tery). Then,
press the AC
120 V switch
again.

462

6-4. Using the other interior features

If the power outlet cannot be
used even after performing the
procedures above, have the
vehicle inspected by your
Toyota dealer.

The hybrid bat-
tery (traction bat-
tery) becomes
hot when the
outside tempera-
ture is especially
high

Move the vehi-
cle to the shade
or other cooler
location, or use
the air condition-
ing to lower the
temperature
inside the vehi-
cle. Then, after
waiting for a
while, press the
AC 120 V switch
again.

The hybrid bat-
tery (traction bat-
tery) becomes
cold when the
outside tempera-
ture is especially
low

Drive for a while
or use the air
conditioning to
raise the tem-
perature inside
the vehicle.
Then, after wait-
ing for a while,
press the AC
120 V switch
again.

Electrical device
does not operate

Disconnect the
power source
plug of the elec-
trical device and
check that the
device is not
malfunctioning.
Then, press the
AC 120 V switch
again. Check the
instruction man-
ual of the electri-
cal device.

Likely cause

Correction pro-

cedure

Total power con-
sumption
exceeds 1500 W

Disconnect the
power source
plug of the elec-
trical device and
check that the
total power con-
sumption does
not exceed 1500
W. Then, press
the AC 120 V
switch again.

Short circuit in
the power outlet

Disconnect the
power source
plug of the elec-
trical device and
check the follow-
ing items. Then,
press the AC
120 V switch
again.
• No foreign

matter such as
a pin has been
inserted

• No sub-

stances such
as drinking
water, rain, or
snow are
adhered

• No dirt or dust

is adhered

Likely cause

Correction pro-

cedure

463

6-4. Using the other interior features

Interior

featur

: If equipped

■

HomeLink

programming pro-

cedure

The programming procedures can

also be found at the following URL.
Website: www.homelink.com/toyota

For support, contact customer sup-

port at the following.
Help Line: 1-800-355-3515

The HomeLink

wireless control

system in your vehicle has 3
buttons which can be pro-
grammed to operate 3 different
devices. Refer to the program-
ming methods on the following
pages to determine the method
which is appropriate for the

device.



Vehicles with auto anti-glare
inside rear view mirror

HomeLink

indicator light

Garage door operation indi-
cators

HomeLink

icon

Illuminates while HomeLink

operating.

Buttons



Vehicles with Digital Rear-
view Mirror

HomeLink

indicator light

Illuminates above each button
selected.

HomeLink

icon

Garage door opener

The garage door opener can
be programmed using the
HomeLink

to operate

garage doors, gates, entry
doors, door locks, home
lighting systems, security
systems, and other devices.

System components

464

6-4. Using the other interior features

Garage door operation indi-
cators

HomeLink

logo

Appears while HomeLink

is oper-

ating.
When the HomeLink

button is

pressed, the logo disappears even
while the HomeLink

is operating.

Setting icon

Press the menu button to change
the setting.

Menu buttons

HomeLink

buttons

■

Codes stored in the HomeLink

memory

●

The registered codes are not

erased even if the 12-volt battery

cable is disconnected.

●

If learning failed when registering
a different code to a HomeLink

button that already has a code

registered to it, the already regis-

tered code will not be erased.

■

Before programming
HomeLink



During programming, it is pos-
sible that garage doors,
gates, or other devices may
operate. For this reason,
make sure that people and
objects are clear of the
garage door or other devices
to prevent injury or other
potential harm.



It is recommended that a new
battery be placed in the
remote control transmitter for
successful programming.



Garage door opener motors
manufactured after 1995 may
be equipped with rolling code
protection. If this is the case,
you may need a stepladder or

WARNING

■

When programming a garage

door or other remote control

device

The garage door or other device

may operate, so ensure people

and objects are out of danger to

prevent potential harm.

■

Conforming to federal safety

standards

Do not use the HomeLink

com-

patible transceiver with any

garage door opener or device that

lacks safety stop and reverse fea-

tures as required by federal safety

standards.
This includes any garage door

that cannot detect an interfering

object. A door or device without

these features increases the risk

of death or serious injury.

■

When operating or program-
ming HomeLink

Never allow a child to operate or
play with the HomeLink

buttons.

Programming HomeLink

465

6-4. Using the other interior features

Interior

featur

other sturdy, safe device to
reach the “Learn” or “Smart”
button on the garage door
opener motor.

■

Programming HomeLink

Steps

through

must be per-

formed within 60 seconds, oth-
erwise the HomeLink

indicator

light will stop flashing and pro-
gramming will not be success-
fully completed.

Vehicles with Digital Rear-
view Mirror: Press the
HomeLink

button or menu

button

When the HomeLink

button is

pressed:

Homelink

Training Tutorial will be

displayed to assist you program-

ming the HomeLink

When Homelink

Training Tutorial

is displayed, follow the instructions

displayed.
When the menu button is pressed:

Press the menu button

and

select the “Set Up >”. Homelink

Training Tutorial will be displayed

to assist you programming the

HomeLink

When Homelink

Training Tutorial

is displayed, follow the instructions

displayed.

Press and release the
HomeLink

button you want

to program and check that
the HomeLink

indicator light

flashes (orange).

Point the remote control
transmitter for the device at
the rear view mirror, 1 to 3 in.

(25 to 75 mm) from the
HomeLink

buttons.

Keep the HomeLink

indicator light

in view while programming.

Program a device.



Programming a device other
than an entry gate (for U.S.A.
owners)

Press and hold the remote con-
trol transmitter button until the
HomeLink

indicator light

changes from slowly flashing
orange to rapidly flashing green
(rolling code) or continuously lit
green (fixed code), then release
the button.



Programming an entry gate
(for U.S.A. owners)/Program-
ming a device in the Cana-
dian market

Press and release the remote

466

6-4. Using the other interior features

control transmitter button at 2
second intervals, repeatedly,
until the HomeLink

indicator

light changes from slowly flash-
ing orange to rapidly flashing
(green) (rolling code) or continu-
ously lit (green) (fixed code).

Test the HomeLink

opera-

tion by pressing the newly
programmed button and
observing the HomeLink

indicator light:



HomeLink

indicator light illu-

minates: Programming of a
fixed code device has com-
pleted. The garage door or
other device should operate
when a HomeLink

button is

pressed and released.



HomeLink

indicator light

flashes rapidly: The garage
door opener or other device is
equipped with a rolling code.
To complete programming,
firmly press and hold the
HomeLink

button for 2 sec-

onds then release it.



If the garage door or other
device does not operate, pro-
ceed to “Programming a roll-
ing code system”.

Repeat the steps above to
program another device for
any of the remaining
HomeLink

buttons.

■

Programming a rolling code
system

Two or more people may be
needed to complete rolling code
programming.

Locate the “Learn” or “Smart”
button on the garage door
opener motor in the garage.

This button can usually be found

where the hanging antenna wire is

attached to the unit. The name and

color of the button may vary by

manufacturer. Refer to the owner’s

manual supplied with the garage

door opener motor for details.

Press and release the
“Learn” or “Smart” button.

Perform

within 30 seconds after

performing

Press and hold the desired
HomeLink

button (inside the

vehicle) for 2 seconds and
release it. Repeat this

467

6-4. Using the other interior features

Interior

featur

sequence
(press/hold/release) up to 3
times to complete program-
ming.
If the garage door opener
motor operates when the
HomeLink

button is

pressed, the garage door
opener motor recognizes the
HomeLink

signal.

■

Enabling 2-way communi-
cation with a garage door
(only available for compati-
ble devices)

When enabled, 2-way communi-
cation allows you to check the
status of the opening and clos-
ing of a garage door through
indicators in your vehicle.
2-way communication is only
available if the garage door
opener motor used is a compati-
ble device. (To check device
compatibility, refer to
www.homelink.com.)

Within 5 seconds after pro-
gramming the garage door
opener has been completed,
if the garage door opener
motor is trained to

HomeLink

, both garage

door operation indicators will
flash rapidly (green) and the
light on the garage door
opener motor will blink twice,
indicating that 2-way commu-
nication is enabled.

If the indicators do not flash, per-

form

and

within the first 10

presses of the HomeLink

button

after programming has been com-

pleted.

Press a programmed
HomeLink

button to oper-

ate a garage door.

Within 1 minute of pressing
the HomeLink

button, after

the garage door operation
has stopped, press the
“Learn” or “Smart” button on
the garage door opener
motor. Within 5 seconds of
the establishment of 2-way
communication with the
garage door opener, both
garage door operation indica-
tors in the vehicle will flash
rapidly (green) and the light
on the garage door opener
motor will blink twice, indicat-
ing that 2-way communica-
tion is enabled.

■

Reprogramming a single
HomeLink

button

When the following procedure is
performed, buttons which
already have devices registered
to them can be overwritten:

Toyota RAV4 Prime (2023 year). Manual in english - page 28