Toyota Proace EV (2022 year). Manual in english - page 14
273
Procedure from the telephone
A message appears in the screen confirming the
Telephone
Select the name of the system in the list
pairing.
of devices detected.
Pairing a Bluetooth®
Information and advice
telephone
Procedure from the system
The "Telephone" menu gives access to the
Press the MENU button.
following functions in particular: "Directory", if
10
WARNING
your telephone equipment is fully compatible,
Select "Connections".
"Call log", "View paired devices".
As a safety measure and because they
Depending on the type of telephone, you may be
require prolonged attention on the part of the
asked to accept or confirm access by the system
Confirm with OK.
driver, the operations for pairing of the
to each of these functions.
Bluetooth mobile telephone with the Bluetooth
Select "Search for a device".
hands-free system of your audio system must
NOTICE
be carried out with the vehicle stationary
Confirm with OK.
and the ignition on.
Go to the Brand's website for more
information (compatibility, more help, etc.).
A window is displayed with a search in progress
message.
NOTICE
In the list of devices detected, select a telephone
Managing connections
Activate the telephone's Bluetooth function
to pair. Only one telephone can be paired at a
and ensure that it is "visible to all" (telephone
time.
NOTICE
configuration).
Completing the pairing
The telephone connection automatically
includes hands free operation and audio
NOTICE
WARNING
streaming.
The ability of the system to connect to just
The services available depend on the
To complete the pairing, whichever procedure
one profile depends on the telephone. Both
network, the SIM card and the compatibility of
is used (from the telephone or from the
profiles may connect by default.
the Bluetooth telephone used.
system), ensure that the code is the same in
Check the instructions for your telephone and
the system and in the telephone.
Press the MENU button.
with your service provider for the services to
which you have access.
If pairing fails, the number of attempts is not
Select "Connections".
restricted.
274
Press OK to confirm.
- "Connect telephone + media player" /
Confirm with OK.
"Disconnect telephone + media player" : to
Select "Bluetooth Connections
connect / disconnect the telephone (hands-free
Press this button for more than two
management" and confirm. The list of
kit and streaming).
seconds for access to your directory, then
paired telephones is displayed.
- "Delete connection": to delete the pairing.
navigate using the thumb wheel.
Press OK to confirm.
NOTICE
Ending a call
Indicates that a device is connected.
In the "Telephone" menu.
When you delete a pairing in the system,
Select "End call".
remember to delete it from your telephone as
Confirm with OK to end the call.
NOTICE
well.
During a call, press one of these buttons
for more than two seconds.
Press OK to confirm.
A number indicates the profile of the
connection with the system:
NOTICE
- 1 for media or 1 for telephone.
Receiving a call
- 2 for media and telephone.
The system accesses the telephone's
An incoming call is announced by a ring and a
contacts directory, depending on its
Indicates connection of the audio
superimposed display in the screen.
compatibility, and while it is connected via
steaming profile.
Select the "YES" tab in the screen using
Bluetooth.
Indicates connection of the hands-free
the buttons.
telephone profile.
Confirm with OK.
Select a telephone.
NOTICE
Press this button at the steering mounted
Press OK to confirm.
controls to accept the call.
With certain telephones connected by
Bluetooth you can send a contact to the
Then select and confirm:
Making a call
directory of the audio system.
Contacts imported in this way are saved in a
In the "Telephone" menu.
- "Connect telephone" / "Disconnect
permanent directory visible to all, whatever
Select "Call".
telephone" : to connect / disconnect the
the telephone connected.
Select "Dial".
telephone or the hands-free kit only.
The menu for the directory is not accessible if
Or
- "Connect media player" / "Disconnect
it is empty.
Select "Directory".
media player" : to connect / disconnect
Or
streaming only.
Select "Calls list".
275
Managing calls
If the contact has been cut off, when you
To modify the contacts saved in the
reconnect on returning to the vehicle,
system, press MENU then select
During a call, press OK to display the
the Bluetooth connection will be restored
"Telephone" and confirm.
contextual menu.
automatically and sound returned to the
Select "Directory management" and confirm.
End call
system (depending on the compatibility of the
You can:
telephone).
- "Consult an entry",
In the contextual menu, select "Hang up"
10
In some cases, the Telephone mode must be
- "Delete an entry",
to end the call.
activated from the telephone.
- "Delete all entries".
Confirm with OK.
The system accesses the telephone's
Interactive voice response
contacts directory, depending on its
Microphone off
From the contextual menu, select "DTMF
compatibility, and while it is connected via
tones" and confirm to use the digital
Bluetooth.
(so that the caller cannot hear)
keypad to navigate in the interactive voice
With certain telephones connected by
In the contextual menu:
response menu.
Bluetooth you can send a contact to the
Confirm with OK.
directory of the audio system.
- select "Micro OFF" to switch off the
Contacts imported in this way are saved in a
microphone.
permanent directory visible to all, whatever the
- deselect "Micro OFF" to switch the
Consultation call
telephone connected.
microphone on.
From the contextual menu, select
The menu for the directory is not accessible if it
Confirm with OK.
"Switch" and validate to return to a call
is empty.
left on hold.
Confirm with OK.
Voice recognition
Telephone mode
This function allows you to use your
In the contextual menu:
smartphone's voice recognition via the system.
Directory
To start voice recognition, depending on the type
- select "Telephone mode" to transfer the
To access the directory, press and hold
of steering mounted controls:
call to the telephone (for example, to leave the
SRC/TEL.
Make a long press on the end of the lighting
vehicle while continuing a conversation).
Select "Directory" to see the list of
control stalk.
- deselect "Telephone mode" to transfer the
contacts.
OR
call to the vehicle.
Confirm with OK.
Press this button.
Confirm with OK.
276
Radio
presets are inoperative (no sound, 87.5 MHz
NOTICE
is displayed, etc.).
There is a difference in sound quality
The vehicle is too far from the selected station’s
Voice recognition requires the use of a
between the different audio sources (radio,
transmitter, or no transmitter is present in the
compatible smartphone first connected to the
CD, etc.).
geographical area.
vehicle by Bluetooth.
For optimal listening quality, the audio settings
► Activate the RDS function to allow the system
(Volume, Bass, Treble, Ambience and Loudness)
to check for a more powerful transmitter in the
can be adjusted to different audio sources,
area.
Frequently asked
resulting in audible differences when switching
The environment (hills, buildings, tunnels,
between sources (radio, CD, etc.).
questions
basement car parks, etc.) may block reception,
► Check that the audio settings (Volume, Bass,
including in RDS mode.
The following information groups together the
Treble, Ambience and Loudness) are appropriate
This is a perfectly normal phenomenon, and is
answers to the most frequently asked questions
to the sources being listened to. We recommend
not indicative of an audio system malfunction.
concerning your audio system.
setting the audio functions (Bass, Treble, Fr-Re
The aerial is absent or has been damaged (for
With the engine off, the audio system
balance and Le-Ri balance) to the middle
example when going through an automatic car
switches off after a few minutes of use.
position, setting the musical ambience to "None",
wash or in an underground car park).
When the engine is switched off, the audio
setting loudness correction to "Active" in CD
► Have the aerial checked by a dealer.
system operating time depends on the state of
mode and "Inactive" in Radio mode.
The sound intermittently cuts out for 1 or 2
charge of the battery.
The preset stations do not function (no
seconds in radio mode.
The switch-off is normal: the audio system
sound, 87.5 MHz is displayed, etc.).
During this brief sound cut-out, the RDS
switches to economy mode and switches off to
The wrong waveband is selected.
searches for another frequency giving better
avoid discharging the vehicle's battery.
► Press the BAND button to return to the
reception of the station.
► Start the vehicle’s engine to increase the
waveband (FM, FM2, DAB, AM) on which the
► Switch off the RDS function if the
charge of the battery.
stations are preset.
phenomenon occurs too frequently and always
The message "the audio system is
Traffic announcement (TA) is shown but I
on the same route.
overheated" is displayed onscreen.
receive no traffic information.
To protect the installation if the ambient
The radio station is not part of the regional traffic
Media
temperature is too high, the audio system
information network.
The Bluetooth connection is cut.
switches to an automatic thermal protection
► Tune to a radio station that broadcasts traffic
The battery in the peripheral device may not be
mode, in which the volume may be decreased or
information.
sufficiently charged.
the CD player stopped.
The reception quality of the tuned radio
► Charge the battery in the peripheral device.
► Switch the audio system off for a few minutes
station gradually deteriorates or the station
The message "USB device error" is displayed
to allow the system to cool.
in the screen.
277
The USB stick has not been recognised, or may
► Manually activate the MTP profile on the
be corrupted.
smartphone (USB settings menu).
► Reformat the USB memory stick.
The CD is systematically ejected or is not
Telephone
played.
I am unable to access my voicemail.
The CD is upside down, cannot be read, does
Few telephones or service providers allow the
10
not contain audio files or contains audio files of a
use of this function.
format not recognised by the audio system.
► Call your voicemail, via the telephone menu,
The CD is protected by an anti-pirating system
using the number provided by your operator.
not recognised by the audio system.
I am unable to access my directory of
► Check that the CD is inserted in the player
contacts.
the right way up.
► Check the compatibility of your telephone.
► Check the condition of the CD: the CD cannot
You did not grant access to your contacts when
be played if it is too badly damaged.
pairing the telephone.
► Check the content in the case of a burned
► Accept or confirm access by the system to
CD: read the recommendations in the "Audio"
the contacts on your telephone.
section.
I am unable to continue a conversation when
Due to poor quality, certain burned CDs will not
getting into my vehicle.
be played by the audio system.
Handset mode is activated.
The CD audio quality is is poor.
► Deselect handset mode to transfer the call to
The CD is scratched or of poor quality.
the vehicle.
► Insert good quality CDs and store them in
I am unable to pair my telephone by
suitable conditions.
Bluetooth.
The audio settings (bass, treble, ambience) are
Telephones (models, versions of operating
unsuitable.
systems) have their own specificities in the
► Return bass and treble settings to 0, without
pairing procedure and some telephones are not
selecting an ambience.
compatible.
I am unable to play the music files on my
► Before starting the pairing procedure, delete
smartphone via the USB port.
the telephone pairing from the system and the
Depending on the smartphone, access by the
system pairing from the telephone, in order to
audio system to music on the smartphone may
view the compatibility of the telephones.
have to be approved on the latter.
278
TOYOTA Pro Touch
WARNING
First steps
With the engine running, a press mutes
For safety reasons and because they require
the sound.
sustained attention by the driver, the following
With the ignition off, a press turns the system on.
operations must be carried out with the
Increase or decrease the volume using
vehicle stationary and the ignition on:
the wheel or the "plus" or "minus" buttons
- Pairing the smartphone with the system via
(depending on the equipment).
Bluetooth.
Use the buttons on either side of or below the
- Using the smartphone.
touch screen to access the menus, then press
- Connecting to the CarPlay® or Android
the virtual buttons on the touch screen.
Auto applications (certain applications stop
Depending on the model, use the "Source" and
displaying when the vehicle is moving).
"Menu" buttons on the left of the touch screen to
- Changing the system settings and
Multimedia audio system -
access the menus, then press the virtual buttons
configuration.
on the touch screen.
Applications - Bluetooth®
At all times it is possible to display the rolling
telephone
menus by pressing the screen briefly with three
NOTICE
fingers.
NOTICE
The system is protected so that it only
All touch-sensitive areas on the screen are
operates in the vehicle.
white.
The functions and settings described vary
The message Energy economy mode is
On pages with multiple tabs at the bottom of the
according to the vehicle version and
displayed when the system is about to go into
screen, you can switch between pages either
configuration, as well as the country of sale.
standby.
by tapping the tab for the desired page or by
swiping the pages to the left or right with your
finger.
Press in the shaded area to go back up a level
or confirm.
Press the back arrow to go back a level or
confirm.
279
WARNING
Steering mounted controls
The touch screen is of the "capacitive" type.
Steering mounted controls -
To clean the screen, use a soft, non-abrasive
Type 1
cloth (e.g. spectacles cloth) with no additional
product.
11
Do not use sharp objects on the screen.
Do not touch the screen with wet hands.
Radio:
Select the previous/next preset radio
Certain information is displayed permanently in
station.
the upper bar of the touch screen:
Select the previous/next item in a menu or a list.
NOTICE
- Air conditioning status information (depending
Media:
on version), and direct access to the
In the "Settings" menu, it is possible to create
Select the previous/next track.
corresponding menu.
a profile for an individual or for a group of
Select the previous/next item in a menu or a list.
- Radio Media and Telephone menu status
people with shared interests, and configure a
Radio:
information.
wide range of settings (radio presets, audio
Short press: display the list of radio
- Privacy status information.
settings, ambiences, etc.). Settings are
stations.
- Access to the touch screen and digital
applied automatically.
Long press: update the list.
instrument panel settings.
Media:
Audio source selection (depending on
Short press: display the list of folders.
equipment):
NOTICE
Long press: display the available sorting options.
- FM/DAB/AM radio stations (depending on
Change audio source (radio; USB; AUX if
equipment).
In very hot conditions, the volume may be
equipment connected; CD; streaming).
- Telephone connected via Bluetooth and
limited to protect the system. It may enter
Confirm a selection.
Bluetooth multimedia broadcast (streaming).
standby mode (with the screen and sound off)
- USB Memory stick.
for 5 minutes or more.
Increase volume.
The system will resume normal operation
when the temperature in the passenger
Decrease volume.
compartment has dropped.
Mute/restore sound by simultaneously
pressing the increase and decrease
volume buttons.
280
Steering mounted controls -
Short press: confirm a selection; if nothing
Radio Media
selected, access to presets.
Type 2
Radio: display the list of stations.
Media: display the list of tracks.
Radio (press and hold): update the list of
Voice commands:
stations received.
This control is located on the steering
wheel or at the end of the lighting control stalk
Menus
(depending on equipment).
Short press, smartphone voice commands via
the system.
Applications
Increase volume.
Select an audio source or radio station.
Decrease volume.
Mute by pressing the volume increase
and decrease buttons simultaneously
Telephone
(depending on equipment).
Restore the sound by pressing one of the two
volume buttons.
Media (short press): change the
multimedia source.
Telephone (short press): start telephone
Access configurable equipment.
call.
Call in progress (short press): access
telephone menu.
Telephone (long press): reject an incoming call,
end call; when no call is in progress, access
Connect a mobile phone via Bluetooth®.
telephone menu.
Run certain applications from a
Radio (rotate): automatic search for the
smartphone connected via CarPlay® or Android
previous/next station.
Auto.
Media (rotate): previous/next track, move in a
list.
281
Settings
Navigation
Applications
Viewing photos
Insert a USB memory stick in the USB port.
WARNING
11
To protect the system, do not use a USB hub.
The system can read folders and image files in
the formats: .tiff; .gif; .jpg/jpeg; .bmp and .png.
Configure the navigation and select your
Configure a personal profile and/or
Press Applications to display the main
destination via CarPlay® or Android Auto.
configure the sound (balance, ambience,
page.
etc.) and the display (language, units, date, time,
Press "Photos".
Air conditioning
etc.).
Select a folder.
Driving
Select an image to view.
18,5
21,5
Press this button to display the details of
the photo.
Press the back arrow to go back a level.
Managing messages
Manage various temperature and air flow
Press Applications to display the main
settings.
page.
Activate, deactivate or configure certain
Press "SMS".
vehicle functions.
Select the "SMS” tab.
282
Press this button to select the display
Radio
Changing the waveband
settings for messages.
Press Radio Media to display the main
Press this button to search and select a
Selecting a station
page.
recipient.
Press the "OPTIONS" button to access the
Select the "Quick messages” tab.
Press Radio Media to display the main
secondary page.
page.
Press "Band" to change waveband.
Press this button to select the display
Press one of the buttons to perform an
settings for messages.
automatic search for radio stations.
Press in the shaded area to confirm.
Press this button to write a new message.
Or
Move the slider to manually search for
Press the bin alongside the selected
frequencies up or down.
Presetting a station
message to delete it.
Or
Select a radio station or frequency.
Press this button alongside the selected
Press the frequency.
Make a short press on the star outline. If
message to display the secondary page.
the star is solid, the radio station is
Press this button to edit and modify the
Enter the FM and AM waveband values
already preset.
existing text.
using the virtual keypad.
Or
Press this button to write a new message.
Press "OK" to confirm.
Select a radio station or frequency.
Press "Preset".
Press the bin to delete the message.
WARNING
Make a long press on one of the buttons
to preset the station.
Radio reception may be affected by the use of
electrical equipment not approved by the
Activating/Deactivating RDS
Brand, such as a USB charger connected to
RDS, if activated, allows you to continue
the 12 V socket.
listening to the same station by automatically
The exterior environment (hills, buildings,
retuning to alternative frequencies.
tunnels, basement car parks, etc.) may
Press Radio Media to display the main
block reception, including in RDS mode.
page.
This phenomenon is perfectly normal in the
Press the "OPTIONS" button to access the
context of radio wave transmission, and
secondary page.
in no way indicative of an audio system
Activate/deactivate "RDS".
malfunction.
283
Press in the shaded area to confirm.
previously playing media resumes at the end of
NOTICE
the message.
Press Radio Media to display the main
In the "Tone" tab, the Ambience, Bass,
NOTICE
page.
Medium and Treble sound settings are
Press the "OPTIONS" button to access the
different and independent for each audio
RDS station tracking may not be available
secondary page.
source.
nationwide, as many radio stations do not
11
Activate/deactivate "TA".
In the "Balance” tab, the All passengers,
cover 100 % of the country. This explains the
Driver and Front only settings are common
loss of reception of the station during a
Press in the shaded area to confirm.
to all sources.
journey.
In the "Sound” tab, activate or deactivate
"Volume linked to speed", "Auxiliary input"
Audio settings
Displaying text information
and "Touch tones".
Press Radio Media to display the main
The "Radio Text" function displays information
page.
transmitted by the radio station relating to the
Press the "OPTIONS" button to access the
WARNING
station or the currently playing song.
secondary page.
Press Radio Media to display the main
The balance/distribution (or spatialisation with
Press "Audio settings".
page.
Press the "OPTIONS" button to access the
to adjust the sound quality according to the
Select the "Tone", "Balance", "Sound",
secondary page.
number of passengers in the vehicle.
"Voice" or "Ringtones" tab to configure
Activate/deactivate "News".
the sound settings.
Press the back arrow to confirm.
NOTICE
Press in the shaded area to confirm.
Playing TA messages
optimises the sound distribution inside the
passenger compartment.
The TA (Traffic Announcement) function gives
priority to TA alert messages. To operate, this
function needs good reception of a radio station
that transmits this type of message. While traffic
information is being broadcast, the current
media is automatically interrupted so that the
TA message can be heard. Normal play of the
284
Press in the shaded area to confirm.
DAB (Digital Audio
Media
Broadcasting) radio
USB port
NOTICE
Terrestrial Digital Radio
Insert the USB memory stick into the USB
If "FM-DAB Follow-up" is activated, there may
port or connect the USB device to the
Terrestrial Digital Radio
be a time offset of a few seconds when the
USB port using a suitable cable (not supplied).
Digital radio provides higher quality sound.
system switches to "FM" analogue radio, and
The various "multiplexes/ensembles" offer a
in some cases a change in volume.
WARNING
choice of radio stations organised in alphabetical
When the digital signal quality is restored, the
order.
system automatically changes back to "DAB".
To protect the system, do not use a USB hub.
Press Radio Media to display the main
page.
WARNING
The system builds playlists (in temporary
Press the "OPTIONS" button to access the
memory); this operation can take from a
secondary page.
If the "DAB" station being listened to is not
few seconds to several minutes at the first
Press "Band" to select "DAB band".
available on "FM", or if "FM-DAB Follow-up"
connection.
is not activated, the sound will cut out while
Reduce the number of non-music files and the
Press in the shaded area to confirm.
the digital signal is too weak.
number of folders to reduce the waiting time.
Playlists are updated whenever the ignition
is switched off or a USB memory stick is
FM-DAB Follow-up
connected. The audio system memorises these
"DAB" does not cover 100 % of the country.
lists, which will subsequently load faster if they
When the digital radio signal is poor, the
have not been changed.
"FM-DAB Follow-up" enables you to continue
listening to the same station by automatically
Selecting the source
switching to the corresponding "FM" analogue
Press Radio Media to display the main
station (if there is one).
page.
Press Radio Media to display the main
Press the "SOURCES" button.
page.
Select the source.
Press the "OPTIONS" button to access the
secondary page.
Activate/deactivate "FM-DAB Follow-up".
285
BluetoothStreaming®
NOTICE
WARNING
Streaming allows you to listen to the audio feed
from your smartphone.
The classifications available are those of the
To protect the system, do not use a USB hub.
The Bluetooth profile must be activated.
portable device connected (artists/albums/
First adjust the volume on the portable device
genres/playlists/audio books/podcasts). It is
The audio system will only play audio files with
also possible to use a classification structured
(to a high level). Then adjust the volume of the
11
".wav", ".wma", ".aac", ".ogg" and ".mp3" file
system.
in the form of a library.
extensions, at bit rates between 32 Kbps and
If play does not start automatically, it may be
The default classification used is by artist. To
320 Kbps.
necessary to start the audio playback from the
modify the classification used, return to the
It also supports VBR (Variable Bit Rate) mode.
smartphone.
first level of the menu then select the desired
No other file types (".mp4", etc.) can be read.
Control is from the portable device or by using
classification (playlists for example) and
All ".wma" files must be standard WMA 9 files.
the system's touch buttons.
confirm to go down through the menu to the
The supported sampling rates are 11, 22, 44 and
desired track.
48 KHz.
NOTICE
The version of software in the audio system may
To avoid reading and display problems, we
Once connected in Streaming mode, the
not be compatible with the generation of the
recommend choosing file names less than 20
smartphone is considered to be a media
Apple® player.
characters long that do not contain any special
source.
characters (e.g. “ ? . ; ù).
Information and advice
Use only USB memory sticks in FAT32 format
The system supports USB mass storage
(File Allocation Table).
Connecting Apple® players
devices, BlackBerry® devices or Apple® players
Connect the Apple® player to the USB socket
via the USB ports. The adapter cable is not
NOTICE
using a suitable cable (not supplied).
supplied.
Play starts automatically.
We recommend using the original USB cable
Devices are managed using the audio system
Control is via the audio system.
for the portable device.
controls.
Other devices, not recognised on connection,
must be connected via Bluetooth streaming, if
compatible.
286
Telephone
CarPlay® smartphone
NOTICE
connection
USB sockets
When the USB cable is disconnected and the
Depending on country.
Depending on equipment, for more information
ignition is switched off then back on, the
on the USB sockets compatible with CarPlay® or
system will not automatically switch to Radio
NOTICE
Android Auto applications, refer to the "Ease of
Media mode; the source must be changed
use and comfort" section.
manually.
On connecting the USB cable, the CarPlay®
function deactivates the system's Bluetooth®
NOTICE
The CarPlay® navigation can be accessed
mode.
at any time by pressing the system's
The "CarPlay" function requires the use of
For the list of compatible smartphones, visit
Navigation button.
a compatible smartphone and compatible
the Manufacturer's website in your country.
applications.
Android Auto smartphone
Connect the USB cable. The smartphone
connection
NOTICE
charges when connected by the USB
Depending on country.
Synchronising a smartphone enables users to
cable.
On the smartphone, download the
display applications that support the
From the system, press Telephone to
Android Auto application.
smartphone’s CarPlay® or Android Auto
display the CarPlay® interface.
technology on the vehicle’s screen. For
Or
NOTICE
CarPlay® technology, the CarPlay® function
If the smartphone has already connected
must first be activated on the smartphone.
by Bluetooth®.
The "Android Auto" function requires the use
Unlock the smartphone for the communication
Connect the USB cable. The smartphone
of a compatible smartphone and applications.
process between the smartphone and the
charges when connected by the USB
system to work.
cable.
Telephone not connected by
As principles and standards are constantly
From the system, press "Telephone" to
Bluetooth®
changing, we recommend keeping the
display the main page.
Press the "PHONE" button to go to the
Connect a USB cable. The smartphone
smartphone's operating system up-to-
secondary page.
charges when connected by a USB cable.
date, together with the date and time on
Press "CarPlay" to display the CarPlay®
From the system, press "Telephone" to
the smartphone and the system.
interface.
display the main page.
Press "Android Auto" to start the
application in the system.
287
Depending on the smartphone, it may be
Pairing a Bluetooth®
In the system, accept the connection request
necessary to activate the "Android Auto"
from the telephone.
telephone
function.
During the procedure, several screen
Procedure from the system
WARNING
pages relating to certain features are
Press Telephone to display the main
displayed.
page.
The services available depend on the
11
Accept to start and complete the connection.
Press "Bluetooth search".
network, the SIM card and the compatibility of
When connecting a smartphone to the
The list of detected telephones is
the Bluetooth devices used. Consult the
system, we recommend enabling
displayed.
telephone user guide and the service provider
Bluetooth® on the smartphone.
Select the name of the chosen telephone
to check which services are available.
in the list.
Telephone connected by Bluetooth®
From the system, press "Telephone" to
NOTICE
Connection sharing
display the main page.
The system offers to connect the telephone with
Press the "PHONE" button to display the
The Bluetooth function must be activated and
3 profiles:
secondary page.
the telephone configured as "Visible to all” (in
- "Telephone" (hands-free kit, telephone only),
Press "Android Auto" to start the
the telphone settings).
- “Streaming" (streaming: wireless playing of
application in the system.
audio files on the telephone),
To complete the pairing, whichever procedure is
Access to the different audio sources remains
- "Mobile internet data".
used (from the telephone or from the system),
available in the margin of the Android Auto
Select one or more profiles.
ensure that the code is the same in the system
display, using the touch buttons located in the
and in the telephone.
upper bar.
Press "OK" to confirm.
Access to the menus for the system is possible
NOTICE
at any time using the dedicated buttons.
Depending on the type of telephone, you may by
prompted to accept the transfer of contacts and
If the pairing procedure fails, we recommend
NOTICE
messages.
deactivating and then reactivating the
Bluetooth function on the telephone.
There may be a pause before applications
NOTICE
become available, depending on the quality of
the network.
Procedure from the telephone
The ability of the system to connect just one
profile depends on the telephone.
Select the name of the system in the list
All three profiles may connect by default.
of detected devices.
288
Press Telephone to display the main
Making a call
NOTICE
page.
Press the "PHONE" button to access the
The profiles compatible with the system are:
WARNING
secondary page.
HFP, OPP, PBAP, A2DP, AVRCP, MAP and
Press "Bluetooth connection" to
Using the telephone is not recommended
PAN.
display the list of paired devices.
while driving.
Visit the Brand's website for more information
Press on the name of the telephone
Parking the vehicle.
(compatibility, additional help, etc.).
selected in the list to disconnect it.
Make the call using the steering mounted
Press again to connect it.
controls.
Automatic reconnection
On returning to the vehicle, if the last telephone
Deleting a telephone
Calling a new number
connected is present again, it is automatically
Press the basket at the top right of the
recognised and within about 30 seconds
screen to display a basket alongside the
Press Telephone to display the main
after switching on the ignition, the pairing is
telephone chosen.
page.
established automatically (Bluetooth activated).
Press the basket alongside the telephone
Enter the phone number using the digital
To modify the connection profile:
chosen to delete it.
keypad.
Press Telephone to display the main
Press "Call" to start the call.
page.
Receiving a call
Press the "PHONE" button to access the
An incoming call is announced by a ring and a
Calling a contact
secondary page.
superimposed display in the screen.
Press "Bluetooth connection" to
Make a short press on the steering
Press Telephone to display the main
display the list of paired devices.
mounted PHONE button to accept an
page.
Press the "Details" button for a paired
incoming call.
Or press and hold
device.
And
Select one or more profiles.
Make a long press
the steering mounted PHONE button.
Press "OK" to confirm.
on the steering mounted PHONE button
Press "Contacts".
to reject the call.
Select the desired contact from the displayed list.
Or
Press "Call".
Managing paired telephones
Press "End call".
This function lets you connect or disconnect a
device or delete a pairing.
289
Calling a recently used
Settings
Modifying system settings
number
Press Settings to display the main page.
Press Telephone to display the main
Configuring profiles
Press "Configuration" to access the
page.
Press Settings to display the main page.
secondary page.
Or
Press "System configuration".
Press and hold
Press "Profiles".
11
Press the "Units" tab to change the units of
the steering mounted button.
Select "Profile 1", "Profile 2", "Profile 3” or
distance, fuel consumption and temperature.
"Common profile".
Press the "Factory settings" tab to restore the
Press "Recent calls".
Press this button to enter a name for the
initial settings.
Select the desired contact from the displayed list.
profile using the virtual keypad.
Press "OK" to save.
WARNING
NOTICE
Press the back arrow to confirm.
Returning the system to factory settings
It is always possible to make a call directly
activates the English language by default
from the telephone; as a safety measure, first
Press this button to activate the profile.
(depending on version).
park the vehicle.
Press the back arrow again to confirm.
Press the "System info" tab to display the
versions of the various modules installed in the
Setting the ringtone
Press this button to reset the selected
system.
Press Telephone to display the main
profile.
Press the "Privacy" tab,
page.
or
Press the "OPTIONS" button to access the
Adjusting the brightness
Press Settings to display the main page.
secondary page.
Press Settings to display the main page.
Press "Ring volume" to display the
Press "Privacy" to activate or deactivate
volume bar.
Press Brightness.
the private data mode.
Press the arrows or move the slider to set
Activate or deactivate:
the ring volume.
Move the slider to adjust the brightness of
the screen and/or the instrument panel
- "No sharing (data, vehicle position)".
(depending on version).
- "Only data sharing”
Press in the shaded area to confirm.
- "Data and vehicle position sharing"
290
Press the back arrow to confirm.
Setting the time
Setting the date
Press Settings to display the main page.
Press Settings to display the main page.
Press Settings to display the main page.
Press "Configuration" to access the
Press "Configuration" to access the
Press "Configuration" to access the
secondary page.
secondary page.
secondary page.
Press "Date and time".
Press "Date and time".
Press "Screen configuration".
Select "Time".
Select "Date".
Press "Brightness".
Press this button to set the time using the
Press this button to set the date.
Move the slider to adjust the brightness of
virtual keypad.
the screen and/or the instrument panel
Press "OK" to save the time.
Press the back arrow to save the date.
(depending on version).
Press the back arrow to confirm.
Press this button to set the time zone.
Select the display format for the date.
Press "Animation".
Select the display format for the time
Press the back arrow again to confirm.
Activate or deactivate: “Automatic
(12h/24h).
scrolling”.
Activate or deactivate summer time (+1
Select "Animated transitions".
hour).
NOTICE
Activate or deactivate GPS
Press the back arrow to confirm.
Time and date setting is only available if
synchronisation (UTC).
"GPS Synchronisation:" is deactivated.
Press the back arrow to save the settings.
Selecting the language
Press Settings to display the main page.
NOTICE
Press "Configuration" to access the
The system may not automatically manage
secondary page.
the change between winter and summer time
Select "Language" to change the
(depending on the country of sale).
language.
Press the back arrow to confirm.
291
► Press the round arrow on the "List" tab on the
The Bluetooth profile does not allow the transfer
Frequently asked
"Radio" page.
of this information.
questions
Some radio stations send other information
in place of their name (the title of the song for
Telephone
The following information groups together the
answers to the most frequently asked questions
example).
I cannot connect my Bluetooth telephone.
concerning the system.
The system interprets these details as the station
The telephone's Bluetooth function may be
11
name.
switched off or the device may not be visible.
Radio
► Press the round arrow on the "List" tab on the
► Check that the telephone has Bluetooth
"Radio" page.
switched on.
The reception quality of the tuned radio
station gradually deteriorates or the station
► Check in the telephone settings that it is
Media
"visible to all".
presets are not working (no sound, 87.5 MHz
is displayed, etc.).
Playback of my USB memory stick starts only
The Bluetooth telephone is not compatible with
The vehicle is too far from the selected station’s
after a very long wait (around 2 to 3 minutes).
the system.
transmitter, or no transmitter is present in the
Some files supplied with the memory stick may
► Check the compatibility of the telephone on
geographical area.
greatly slow down access to reading the memory
the Brand's website (services).
► Activate the "RDS" function in the upper bar
stick (multiplication by 10 of the cataloguing
Android Auto and/or CarPlay do not work.
to enable the system to check whether there is
time).
Android Auto and CarPlay may not activate if the
a more powerful transmitter in the geographical
► Delete the files supplied with the memory
USB cables are of poor quality.
area.
stick and limit the number of sub-folders in the
► Use genuine USB cables to ensure
The environment (hills, buildings, tunnels,
file structure on the memory stick.
compatibility.
basement car parks, etc.) is blocking reception,
Some characters in information about the
Android Auto and/or CarPlay do not work.
including in RDS mode.
currently playing media are not displayed
Android Auto and CarPlay are not available in all
This is a perfectly normal phenomenon, and is
correctly.
countries.
not indicative of an audio system malfunction.
The audio system is unable to process certain
► Check the Google Android Auto or Apple
The aerial is missing or has been damaged
types of character.
website to see which countries are supported.
(for example while entering a car wash or
► Use standard characters to name tracks and
The volume of the telephone connected in
underground car park).
folders.
Bluetooth mode is inaudible.
► Have the aerial checked by a dealer.
Playback of streaming files does not start.
The volume depends on both the system and the
I cannot find some radio stations in the list of
The connected device does not automatically
telephone.
received stations.
launch playback.
► Increase the volume of the audio system, to
The name of the radio station changes.
► Start playback from the device.
maximum if required, and increase the volume of
The station is no longer received or its name has
Track names and playing times are not
the telephone if necessary.
changed in the list.
displayed on the audio streaming screen.
292
Ambient noise affects the quality of the
sources, which can generate audible differences
telephone call.
when changing source.
► Reduce ambient noise (close windows, turn
► Check that the sound settings are appropriate
down ventilation, slow down, etc.).
to the sources listened to. Adjust the sound
The contacts are not listed in alphabetical
functions to the middle position.
order.
When the engine is off, the system switches
Some telephones offer display options.
off after several minutes of use.
Depending on the settings chosen, contacts can
When the engine is switched off, the system's
be transferred in a specific order.
operating time depends on the state of charge of
► Modify the telephone directory display
the battery.
settings.
The switch-off is normal: the system
automatically goes into energy economy mode
Settings
and switches off to maintain an adequate charge
When the treble and bass settings are
in the battery.
changed, the ambience is deselected.
► Start the vehicle’s engine to increase the
When the ambience is changed, the treble
charge of the battery.
and bass settings are reset.
Selecting an ambience imposes the treble and
bass settings, and vice versa.
► Modify the treble and bass or ambience
settings to obtain the desired musical ambience.
When the balance settings are changed, the
distribution is deselected.
When the distribution setting is changed, the
balance settings are deselected.
Selecting a distribution setting imposes the
balance settings, and vice versa.
► Modify the balance setting or the distribution
setting to obtain the desired sound quality.
There is a difference in sound quality
between audio sources.
To allow for optimal listening quality, the sound
settings can be tailored to different audio
293
TOYOTA Pro Touch with
WARNING
First steps
navigation system
With the engine running, a press mutes
For safety reasons and because they require
the sound.
sustained attention by the driver, the following
With the ignition off, a press turns the system on.
operations must be carried out with the
Increase or decrease the volume using
vehicle stationary and the ignition on:
the wheel or the "plus" or "minus" buttons
12
- Pairing the smartphone with the system via
(depending on the equipment).
Bluetooth.
Use the menu buttons on either side of or below
- Using the smartphone.
the touch screen for access to the menus, then
- Connecting to the CarPlay® or Android
press the virtual buttons in the touch screen.
Auto applications (certain applications stop
Depending on the model, use the "Source" or
displaying when the vehicle is moving).
"Menu" buttons to access the rolling menus, then
- Watching a video (the video stops when the
press the virtual buttons in the touch screen.
vehicle starts to move again).
Display the rolling menus at any time by pressing
GPS navigation -
- Changing the system settings and
the screen briefly with three fingers.
configuration.
Applications - Multimedia
All of the touch areas of the screen are white.
Press the back arrow to go back a level.
audio system - Bluetooth®
NOTICE
Press "OK" to confirm.
telephone
The system is protected so that it only
WARNING
NOTICE
operates in the vehicle.
The touch screen is of the "capacitive" type.
The message Energy economy mode is
The functions and settings described vary
To clean the screen, use a soft, non-abrasive
displayed when the system is about to go into
according to the vehicle version and
cloth (e.g. spectacles cloth) with no additional
standby.
configuration, as well as the country of sale.
product.
Do not use sharp objects on the screen.
NOTICE
Do not touch the screen with wet hands.
System and map updates can be downloaded
Certain information is displayed permanently
from the Brand's website.
in the side bars or in the upper bar of the touch
The update procedure is also available there.
screen (depending on equipment):