Toyota ProAce Verso (2017 year). Instruction

Access

Electric sliding side door(s)

The exterior and interior door handles and the interior buttons allow the electrically powered movement of the door to be started.

Opening and closing of the doors is accompanied by an audible signal.

Opening

From inside

From outside

Using the handle

Using the remote control

Using the handle

F Door unlocked, press and

hold this button until the

Vehicle unlocked and child lock deactivated.

F Door unlocked, pull and release the handle

corresponding sliding side door

to start the electrically powered opening of

has opened.

the door.

F Pull the handle toward the rear to start the

F Press this button again to reverse

F Pull the handle again to reverse the

electrically powered opening of the door.

the movement of the door.

movement of the door.

The remote controls buttons are not

active with the ignition switched on.

Access

From inside, unlocking then

Using the button(s) at the front

Using the button(s) on the door

pillar

opening

For more information on the Child lock,

refer to the corresponding section.

F Child lock deactivated, to unlock the

vehicle and start the electrically powered

opening of a door, press the button for the

corresponding door.

F Pressing the button again reverses the

movement of the door.

The button is not operational and

The button is not available and

pressing it results in an audible signal, if:

accompanied by an audible signal, if:

the vehicle is moving,

the vehicle has been locked or

deadlocked from outside (using

deadlocked from outside (using the

the key, remote control or Smart

key, remote control or Smart Entry

Entry & Start System, depending on

& Start System, depending on

equipment),

the child lock is on (activated),

The button for the left-hand door is not

The button for the left-hand door is

operational and pressing it results in

not available and is accompanied by

an audible signal if the fuel filler flap is

open.

Access

Closing

Using the handle

From inside

From outside

Using the button(s) at the front

Using the remote control

F Pull and release the handle to start the

F To start the electrically powered opening

electrically powered opening of the door.

of the door, press the button for the

F Pull the handle again to reverse the

F Press and hold this button until

corresponding door.

movement of the door.

the sliding door has closed.

F Pressing the button again reverses the

movement of the door.

F Press this button again to

reverse the movement of the

door.

The button is not operational and

pressing it results in an audible

The remote controls buttons are not

signal, if the speed of the vehicle is

active with the ignition switched on.

above 20 mph (30 km/h).

Access

Using the button(s) on the door

pillar

If a sliding door is not fully closed:

vehicle stationary and engine

running, this warning lamp comes

on, accompanied by an alert

message for a few seconds,

vehicle moving (speed above 6 mph

(10 km/h)), this warning lamp comes

on, accompanied by an audible

signal and an alert message for a

few seconds.

F To start the electrically powered opening

of a door, press the button for the

corresponding door.

F Pressing the button again reverses the

movement of the door.

The button is not operational and

pressing it results in an audible

signal, if the speed of the vehicle is

above 20 mph (30 km/h).

Access

Manual or electric sliding side door(s)

General recommendations

Before any opening or closing and

The electric controls are inhibited in the

during any movement of the doors,

event of an impact. Manual opening and

ensure that no person, animal or object

closing remain possible.

is protruding through the window

The doors must only be operated when

frame or might prevent the intended

the vehicle is stationary.

manoeuvre, either inside or outside the

For your safety and for that of your

vehicle.

passengers, as well as for correct

If this advice is not followed, injuries or

While starting the engine, the

operation of the doors, you are strongly

damage may occur if a person or an

movement of a door is interrupted and

advised not to drive with a door open.

object is trapped or caught.

restored once the engine is running.

Always check that it is safe to operate

Electric closing and opening of the

the door and in particular, be sure not to

doors is not possible above 2 mph

leave children or animals near the door

(3 km/h):

controls without supervision.

If you set off with the door(s) open,

The audible warning, illumination of

you must slow down to below

Depending on the engine, in Stop

the "door open" warning lamp and the

2 mph (3 km/h) in order to close the

mode of Stop & Start, if the door

message in the multifunction screen

door(s).

is closed and you initiate opening

are there to remind you. Contact an

Any attempt to open a door

of the door, the door opens

authorized Toyota dealer or repairer,

electrically using the interior handle

partially and stops. When the

or another duly qualified and equipped

while driving, results in only being

engine changes automatically to

professional to deactivate these

possible to open the door manually.

Start mode, the door continues its

warnings.

This situation is accompanied by

movement.

Lock your vehicle when using an

the audible warning, illumination of

automatic car wash.

the "door open" warning lamp and

the message in the multifunction

screen. To release the door and

be able to operate it again, it is

necessary to stop the vehicle.

Access

The doors and the overall

Safety / Obstacle detection with

Fuel filler flap

dimensions of the vehicle

electric door(s)

When open, a door projects beyond the body.

The obstacle detection system is triggered

If fitted to your vehicle, never open the

Be sure to take this into account when you park

when the moving door encounters an obstacle

left-hand sliding side door when the

alongside a wall, a post or a high kerb...

with a certain level of physical resistance.

fuel filler flap is open. Otherwise you

If an obstacle is detected while the door is

risk damaging the fuel filler flap and the

closing, the door stops then opens fully.

sliding door and causing injury to the

If an obstacle is detected while the door is

person filling the vehicle.

opening, the door stops and then closes.

If an obstacle is detected twice in

succession during a movement of the door,

If the fuel filler flap is open and your

it will no longer close electrically. Close the

vehicle has an electric left-hand sliding

door manually to reinitialise it.

side door, the door cannot be opened

using the opening control button. If

required the door can be opened half

way manually. The fuel filler flap must

be closed to allow the door to open

When open, a door never projects

correctly.

beyond the rear bumper.

Access

On a steep slope

Reinitialising electric doors

Following disconnection of the battery with the

doors open, it may be necessary to close the

doors manually to reinitialise them.

If the doors no longer work electrically,

reinitialise the door(s) as follows:

F Fully close the door(s) manually.

F Fully open the door(s) manually.

F Close the door(s) manually.

F Fully open the door(s) manually.

However, if your vehicle is on a slope, with the

F Close the door(s) manually.

front of the vehicle facing down, the door may

On completion of this procedure, electric

not stay open and may close again jerkily with

operation of the doors is restored.

the risk of injury.

However, if a problem persists following this

It is possible to open and close the doors

procedure, contact an authorized Toyota

electrically on slopes of up to 20%.

In the case of a steep slope, the door

dealer or repairer, or another duly qualified and

However, if your vehicle is on a slope, with the

may be driven by its own weight and

equipped professional.

front of the vehicle facing up, open the door

as a consequence may open or close

with care. The door may open more quickly due

jerkily.

to the incline.

There would not be time for action at

On a steep slope, guide the side door manually

the electric controls to take effect.

to help it to close.

There would not be time for the

obstacle detection system to react.

Take care not to leave the vehicle on

a steep slope with the door(s) open

without supervision. If this advice is not

followed, injuries or damage may occur

if a person or an object is trapped or

caught.

Access

Kick-activated side doors opening and locking

Before making the movement with your

foot, ensure that you are steady and

well positioned, so that you do not lose

your balance (rain, snow, ice, mud, ...).

Take care not to touch the exhaust

tailpipe when making the movement

with your foot - risk of burns.

F Pass your foot below the rear bumper then

remove it, as though kicking (upwards).

By keeping the remote control on your person

The sensor detects your foot approaching and

and with a movement of your foot, the system

leaving and triggers opening or closing of the

unlocks and opens the sliding side door or

side door.

closes and locks it.

The remote control must be located at the rear

of the vehicle, more than about 30 cm and less

than about 2 m from the vehicle.

Make the movement without interruption

and do not repeat it immediately

afterwards or several times.

If the door does not open, wait about

2 seconds before trying again.

The automatic locking after closing the

Do not leave your foot in the air.

door is programmable in the vehicle

configuration menu.

Access

Opening

Closing

If the vehicle is locked, it is unlocked

before opening the door.

With "Hands-free access" activated in the

vehicle configuration menu.

F With the remote control on your person and

With "Hands-free access" activated in the

in the recognition zone A, pass your foot

vehicle configuration menu.

under the outer rear bumper, on the side

With the remote control on your person and

you want to close the door.

in the recognition zone A, pass your foot

under the outer rear bumper, on the side

Once the door has closed, the vehicle locks

you want to open the door.

itself automatically, if "Hands-free access

self-locking" has been selected in the vehicle

configuration menu.

Confirmation that the door is going

to open is signalled by the direction

Confirmation that the door is going

indicators flashing for a few seconds,

to close is signalled by the direction

accompanied by an audible signal.

indicators flashing for a few seconds,

The movement of the door is reversed

accompanied by an audible signal.

if you pass your foot under the bumper

The movement of the door is reversed

during operation of the door.

if you pass your foot under the bumper

If fitted to your vehicle, the electric door

during operation of the door.

mirrors unfold on unlocking the vehicle.

If fitted to your vehicle, the electric door

mirrors fold on locking the vehicle.

Access

Deactivation

With the audio system

Operating fault

By default, hands-free access is activated.

The function can be deactivated in the vehicle

An audible signal repeated three times

configuration menu.

indicates a fault with the system.

In the "Personalisation-Configuration" menu,

Contact an authorized Toyota dealer or

Automatic locking

activate/deactivate "Hands-free access".

repairer, or another duly qualified and equipped

The vehicle locks itself following the Kick-

professional to have the system checked.

activated closing of a sliding door.

The automatic locking can be deactivated in

the vehicle configuration menu.

With the touch screen

In the vehicle settings menu, activate/

deactivate "Hands-free access".

If your vehicle is not fitted with an

alarm, locking is confirmed by fixed

illumination of the direction indicators

for about two seconds.

Depending on version, the door mirrors

Then, if you want automatic locking after

fold at the same time.

closing the door, activate/deactivate "Hands-

free access self-locking".

Access

If "Hands-free access self-locking" is

The sliding door may open or close

Ensure that no person or object could

selected in the vehicle menu and after

erratically if:

prevent the correct opening or closing

closing the door, check that your vehicle

your vehicle is fitted with a towbar,

of the doors.

has locked correctly.

you attach or detach a trailer,

Be aware of children when operating

This is because locking will not take

you fit or remove a bicycle carrier,

the doors.

place:

you load or unload bicycles on a

if the ignition is on,

bicycle carrier,

if one of the doors or the rear

you remove or raise something

tailgate is open,

behind the vehicle,

if a "Smart Entry & Start System"

an animal approaches the bumper,

remote control is inside the vehicle.

you wash your vehicle,

If a number of gestures with your foot

a service is being carried out on

have no effect, wait a few seconds

your vehicle,

before starting again.

you change a wheel.

The system is automatically deactivated

To avoid unwanted operation, keep the

in heavy rain or with accumulations of

key away from the vehicle or deactivate

snow.

the function in the vehicle configuration

If the system fails to work, check that

menu.

the remote control is not exposed to a

source of electromagnetic interference

(smartphone, ...).

Operation may be affected if using a

prosthetic leg.

This system may not work correctly if

your vehicle is fitted with a towbar.

Access

Closing

Rear wing doors

F Close first the right-hand door, then the

with glass windows

left-hand door.

The rear wing doors with glass windows

are asymmetrical.

If the left-hand door is closed

The left-hand door is fitted with a lock.

first, a buffer stop located on

From outside

the edge of the right-hand door

prevents it closing.

If the left-hand door is not fully closed

(the right-hand door is not detected):

vehicle stationary and engine

running, this warning lamp

comes on, accompanied by an

alert message for a few seconds,

After unlocking the vehicle (using the key,

After first opening the left-hand door, pull

vehicle moving (speed above

remote control or Smart Entry & Start

the lever A towards you to open the right-

6 mph (10 km/h)), this warning

System, depending on equipment) pull the

hand door.

lamp comes on, accompanied

door handle.

by an audible signal and an alert

message for a few seconds.

For more information on the Key,

Remote control or Smart Entry &

Start System and in particular

unlocking the vehicle, refer to the

corresponding section.

Access

Opening to approximately 180°

From inside

If the child lock is on (activated), the

If fitted to your vehicle, a check strap system

handle is inoperative.

that allows the doors to be opened from about

Opening

90° to about 180°.

Vehicle locked and child lock off (deactivated).

For more information on the Child lock,

refer to the corresponding section.

Closing

F First close the right-hand door, then the

left-hand door.

F Pull the yellow control when the door is

F Twist this handle down to fully unlock the

open.

vehicle and open the right hand door.

The check strap will engage again

automatically on closing.

Vehicle unlocked and child lock off

When parked with the rear doors

(deactivated).

open to 90°, the doors mask the

rear lamps. To signal your position

F Twist this handle down to open the right-

to other road users driving in the

hand door.

same direction who may not have

seen your vehicle, use a warning

triangle or other device required by

the legislation in your country.

Access

Closing

Back-up control

Rear tailgate

It allows the mechanical unlocking of the rear

Opening

tailgate in the event of a battery or central

locking system malfunction.

Unlocking

F If fitted to your vehicle and if necessary,

fold back the rear seats to gain access to

the lock from inside.

F Lower the rear tailgate using the interior grab

handle then push it home to fully close it.

If the rear tailgate is not fully closed:

vehicle stationary and engine

F After unlocking the vehicle with the key, the

running, this warning lamp

remote control or the Smart Entry & Start

comes on, accompanied by an

System, pull the handle, then raise the rear

alert message for a few seconds,

tailgate.

vehicle moving (speed above 6 mph

F Insert a small screwdriver into hole A of the

(10 km/h)), this warning lamp comes on,

lock to unlock the rear tailgate.

accompanied by an audible signal and an

F Move the latch to the right.

alert message for a few seconds.

For more information on the Key,

Remote control or Smart Entry &

For more information on the Key,

Start System and in particular

Remote control or Smart Entry &

unlocking the vehicle, refer to the

Start System and in particular

Locking after closing

corresponding section.

on locking the vehicle, refer to the

If the fault persists after closing again, the rear

corresponding section.

tailgate will remain locked.

Access

Rear tailgate rear screen

The opening rear screen allows you to access

Closing

the rear of the vehicle directly, without having to

open the rear tailgate.

For more information on the Key,

Remote control or Smart Entry &

Opening

Start System, and in particular

unlocking the vehicle, refer to the

corresponding section.

The rear tailgate and rear tailgate

screen cannot both be open at the

same time, to avoid damaging them.

Close the rear screen by pressing the centre of

the glass until it is fully closed.

If the tailgate rear screen is not fully

closed:

After unlocking the vehicle using the key,

vehicle stationary and the engine

remote control or Smart Entry & Start System

running, this warning lamp

(depending on equipment) press this control

comes on, accompanied by an

and raise the rear screen to open it.

alert message for a few seconds,

vehicle moving (speed above

6 mph (10 km/h)), this warning

For more information on the Key,

lamp comes on, accompanied

Remote control or Smart Entry &

by an audible signal and an alert

Start System, and in particular

message for a few seconds.

unlocking the vehicle, refer to the

corresponding section.

Access

Exterior perimeter

Total protection

Alarm

The system checks for opening of the vehicle.

The alarm is triggered if anyone tries to open

Activation

one of the doors or the bonnet.

F Switch off the ignition and get out of the vehicle.

F Lock the vehicle using the

Volumetric

remote control.

The system monitors the passenger

compartment for any variation in volume.

The alarm is triggered if someone breaks

F Lock the vehicle using the "Smart Entry &

the windscreen, penetrates the passenger

Start System".

compartment or moves around inside the

System which protects and provides a deterrent

vehicle.

The monitoring system is active: the indicator

against theft and break-ins.

lamp in the button flashes once per second

and the direction indicators come on for about

2 seconds.

Self-protection function

If your vehicle is fitted with the fuel

Following a command to lock the vehicle using

burner heater/remote controlled fuel

the remote control or the Smart Entry & Start

The system checks for the

burner heater, volumetric monitoring is

System, the exterior perimeter monitoring is

disconnection of any of its components.

not compatible with this system.

activated after a delay of 5 seconds, the interior

The alarm is triggered if the battery,

For more information on Fuel burner

volumetric monitoring after 45 seconds.

the button or the siren wiring is

heater/Remote controlled fuel burner

If an opening (door, rear tailgate or rear wing

disconnected or damaged.

heater, refer to the corresponding

doors with glass windows, bonnet...) is not

For all work on the alarm system,

section.

closed fully, the vehicle is not locked but

contact an authorized Toyota dealer or

monitoring will be activated after a delay of

repairer, or another duly qualified and

45 seconds.

equipped professional.

Access

Deactivation

Volumetric monitoring

F Reactivate the full alarm system

by locking the vehicle using the

F Press this unlocking button on

Deactivation

remote control or the "Smart

the remote control.

Entry & Start System".

F Switch off the ignition and within

ten seconds press this button

The indicator lamp in the button flashes once

until its indicator lamp is on fixed.

per second again.

F Unlock the vehicle using the "Smart

Entry & Start System".

F Get out of the vehicle.

The monitoring system is deactivated: the

F Immediately lock the vehicle

indicator lamp in the button is off and the

using the remote control or the

Triggering of the alarm

direction indicators flash for about 2 seconds.

"Smart Entry & Start System".

This is indicated by sounding of the siren and

flashing of the direction indicators for thirty

seconds.

If the vehicle locks itself automatically

Only the exterior perimeter protection system is

The monitoring functions remain active until

(this occurs after 30 seconds if one of

active: the indicator lamp in the button flashes

the alarm has been triggered eleven times in

the doors is not opened), the monitoring

once per second.

succession.

system is reactivated automatically.

To be effective, this deactivation must be done

every time the ignition is switched off.

When the vehicle is unlocked using

the remote control or the "Smart

Entry & Start System", rapid flashing

Protection - exterior

Reactivation

of the indicator lamp in the button

perimeter monitoring only

informs you that the alarm was

F Deactivate the exterior perimeter

Deactivate the interior volumetric monitoring

monitoring by unlocking the

triggered during your absence.

to avoid unwanted triggering of the alarm in

vehicle using the remote control

When the ignition is switched on, this

certain cases such as:

or the "Smart Entry & Start

flashing stops immediately.

occupant(s) present in the vehicle,

System".

leaving a window partially open,

The indicator lamp in the button goes off.

washing your vehicle,

changing a wheel,

towing your vehicle,

transport on a ferry.

Toyota ProAce Verso (2017 year). Instruction - part 5