Toyota Sequoia (2005). Manual - part 560

 

  Главная      Automobile - Toyota     Toyota Sequoia - Repair manual 2005 year

 

поиск по сайту           правообладателям

 

 

 

 

 

 

 

 

 

содержание   ..  558  559  560  561   ..

 

 

Toyota Sequoia (2005). Manual - part 560

 

 

DIAGNOSTICS

AUDIO SYSTEM

DI–2035

2229

3

Check of radio receiver assembly installation.

CHECK:
Check that the radio receiver assembly is installed properly.
OK:

Installed properly.

NG

Install the radio receiver assembly properly.

OK

4

Did temperature in cabin change rapidly?

CHECK:
Check whether or not rapid temperature change occurred in the cabin.
OK:

A rapid temperature change occurred.

HINT:
A rapid temperature change creates condensation inside the CD player, which may prevent the CD from
being played.

NG

Replace radio receiver assy.

OK

Let it sit for a while before using (Condensation due to temperature change).

DI–2036

DIAGNOSTICS

AUDIO SYSTEM

2230

Cassette tape cannot be insert or played

INSPECTION PROCEDURE

1

Check for any foreign object.

CHECK:
Check for any foreign objects.

Check that no foreign objects or defects are detected in the cassette tape player of the radio receiver
assembly.

OK:

No foreign objects or defects are detected.

NG

Remove foreign object.

OK

2

Check cassette tape.

CHECK:
Check the cassette tape.

Check that the cassette tape is a normal tape with music or voice recorded.

OK:

Proper cassette tape with music or voice recorded.

NG

End.

OK

DIDA9–01

DIAGNOSTICS

AUDIO SYSTEM

DI–2037

2231

3

Replace cassette tape with another and recheck.

CHECK:
Replace the cassette tape with another one and recheck.

Replace the cassette tape with another normal one to see if the same trouble occurs again.

OK:

The function returns to be normal.

NG

Replace radio receiver assy.

OK

End.

DI–2038

DIAGNOSTICS

AUDIO SYSTEM

2232

Cassette tape cannot be ejected

INSPECTION PROCEDURE

1

Press ”EJECT” and check operation.

CHECK:
Press ”EJECT” and check the operation.

Press the cassette tape EJECT switch of the radio receiver assembly for 2 seconds or more and check
that the cassette tape is ejected.

OK:

The cassette tape is ejected.

NG

Replace radio receiver assy.

OK

2

Check cassette tape.

CHECK:
Check the cassette tape.

Check that the ejected cassette tape does not have a peeled label, a cassette body deformation or
any other defect.

OK:

No fault on the cassette tape.

NG

End.

OK

DIDAA–01

 

 

 

 

 

 

 

содержание   ..  558  559  560  561   ..