Toyota Highlander (2018 year). Manual - part 87

360

5-2. Setup

Press the “SETUP” button.

Select “Audio” on the “Setup” screen.

Number of Radio Presets 
Select the number of radio
preset stations.

Display Cover Art on/off

Automatic Sound Levelizer
(

→P. 360)

Select “Automatic Sound Levelizer”.

Select “High”, “Mid”, “Low” or “Off”.

■

About Automatic Sound Leveliser (ASL)
ASL automatically adjusts the volume and tone quality according to the vehi-
cle speed.

Audio settings

Settings are available for adjusting the radio operation, cover
art, etc.

Screen for audio settings

1
2

1

2
3

Automatic sound leveliser (ASL)

1
2

361

5-2. Setup

5

Audi

o system

Press the “SETUP” button.

Select “Display” on the “Setup” screen.

Adjust screen contrast/bright-
ness

Adjust screen contrast/bright-
ness of the rear view monitor
camera

Changes to day mode.

Select “General” or “Camera” on the “Display Settings” screen.

Adjust the display as desired by selecting “+” or “-”.

When the headlights are turned on, the screen dims. 
However, the screen can be switched to day mode by selecting “Day
Mode”.

The screen will stay in day mode when the headlights are turned on until
“Day Mode” is selected again.

Display settings

Settings are available for adjusting the contrast and brightness
of the screen. 

Screen for display settings

1
2

1

2

3

Adjusting the screen contrast/brightness

Day mode

1
2

362

5-2. Setup

Adjust the voice guidance vol-
ume setting.

Set the voice recognition
prompts “High”, “Low” or “Off”.

Set the train voice recognition.

Set the voice prompt interrupt
on/off.

Set the voice recognition tuto-
rial.

■

To return to the default volume settings
Select “Default”, and then “Yes”.

Voice settings

This screen is used for guidance for voice command systems
setting.

1

2

3
4

5

363

5

Audi

o system

5-3. Using Entune Audio

Press the “AUDIO” button to display the audio source selection
screen.

If the audio source selection screen is not displayed, press the “AUDIO”
button again.

Select the desired audio
source.

Select the desired audio
source then 

 or 

 to

reorder.

The audio source changes as follows each time the “MODE/HOLD”
switch is pressed.

Selecting the audio source

Switching between audio sources such as radio and CD are
explained in this section. 

Changing audio source 

1

2

1

Using the steering wheel switches to change audio source