Toyota Highlander (2018 year). Manual - part 37

160

3-3. Adjusting the seats

Each electronic key can be registered to recall your preferred driving
position.

■

Registering procedure

Record your driving position to button “1” or “2” before performing
the following: 

Carry only the key you want to register, and then close the driver’s
door. 
If 2 or more keys are in the vehicle, the driving position cannot be
recorded properly. 

Check that the shift lever is in P.

Turn the engine switch to IGNITION ON mode.

Recall the driving position that you want to record.

While pressing the recalled
button, press and hold the
door lock switch (either lock
or unlock) until the buzzer
sounds.

If the button could not be regis-
tered, the buzzer sounds contin-
uously for approximately 3
seconds.

■

Recall procedure

Make sure that the doors are locked before recalling the driving
position. Carry the electronic key that has been registered to the
driving position, and then unlock and open the driver’s door using
the smart key system or wireless remote control.

The driving position will move to the recorded position.

If the driving position is in a position that has already been recorded, the
seat and outside rear view mirrors will not move.

Memory recall function

1
2
3
4

161

3-3. Adjusting the seats

3

Op
eration

 o

f each

 compo

nen

t

■

Cancelation procedure

Carry only the key you want to cancel and then close the driver’s
door.
If 2 or more keys are in the vehicle, the driving position cannot be
canceled properly.

Check that the shift lever is in P.

Turn the engine switch to IGNITION ON mode.

While pressing the “SET” button, press and hold the door lock
switch (either lock or unlock) until the buzzer sounds twice.

If the button could not be canceled, the buzzer sounds continuously for
approximately 3 seconds.

■

Recalling the driving position using the memory recall function

●

Different driving positions can be registered for each electronic key. There-
fore, the driving position that is recalled may be different depending on the
key being carried.

●

If a door other than the driver’s door is unlocked with the smart key system,
the driving position cannot be recalled. In this case, press the driving posi-
tion button which has been set.

■

Customization
The unlock door settings of the memory recall function can be customized.
(Customizable features: 

→P. 687)

WARNING

■

Seat adjustment caution
Take care during seat adjustment so that the seat does not strike the rear
passenger or squeeze your body against the steering wheel.

1
2
3

162

3-3. Adjusting the seats

Up

Pull the head restraints up.

Down

Push the head restraint down while
pressing the lock release button.

Up

Pull the head restraints up.

Down

Push the head restraint down while
pressing the lock release button.

Up

Pull the head restraints up.

Down

Push the head restraint down while
pressing the lock release button.

Head restraints

Head restraints are provided for all seats.

Front seats and second seats (with a side table)

Lock release button

1

2

Second seats (without a side table)

Lock release button

1

2

Third seats

Lock release button

1

2

163

3-3. Adjusting the seats

3

Op
eration

 o

f each

 compo

nen

t

■

Removing the head restraints



Front seats and second seats (with a side table)



Second seats (without a side table)



Third seats

Pull the head restraint up while pressing
the lock release button.

Pull the head restraint up while pressing
the lock release button.

Pull the head restraint up while pressing
the lock release button.

Lock release button

Lock release button

Lock release button