Toyota Hilux (2017 year). Manual - part 107

435

5

5-9. Bluetooth

®

 Phone

Au
dio
 sy
stem

Making a phone call

Select “Phonebook” using the “TUNE >” or “< SELECT” button, and
press the “SETUP ENTER” button.
Select the desired name using the “TUNE >” or “< SELECT” button,
and press the off-hook switch.

By pressing 

 (Add S. Dial) and one of the speed dial buttons

(from 

 [1] to 

 [5]) while the desired name is selected, it can

be registered as a speed dial.

Press 

 (A-Z) to display the registered names in alphabetical order

of the initial.

Select “Speed dials” using the “TUNE >” or “< SELECT” button, and
press the “SETUP ENTER” button.
Press the desired preset button (from 

 [1] to 

 [5]) and

press the off-hook switch.

To delete a registered speed dial, after selecting the desired preset
button (from 

 [1] to 

 [5]) press 

 (DELETE) and then

press  

(YES).

Select “Dial by number” using the “TUNE >” or “< SELECT” button,
and press the “SETUP ENTER” button.
Enter the phone number and press the off-hook switch.

To enter the “TEL” or “PHONE” mode, press the off-hook switch.

Dialing by selecting a name

Speed dialing

Dialing by entering the number

1

2

1

2

1

2

436

5-9. Bluetooth

®

 Phone

Select “All calls”, “Missed calls”, “Incoming calls” or “Outgoing calls”
using the “TUNE >” or “< SELECT” button, and press the “SETUP
ENTER” button.
Select a desired number using the “TUNE >” or “< SELECT” button,
and press the off-hook switch.

The following operations can be performed:
● Registering a number as a speed dial

Press 

 (Add S. Dial) and then press the desired preset button

(from 

 [1] to 

 [5]).

● Deleting the selected number

Press 

 (DELETE) and press 

 (YES).

If your cellular phone is not PBAP (Phone Book Access Profile) com-
patible, the contacts cannot be transferred.
Depending on the type of Bluetooth

®

 phone, it may be necessary to

perform additional steps on the phone when transferring contact data.

Setting automatic transferring of the phonebook to on. (

→P. 430)

Default setting is on.

After HFP connection is successful, the phone’s contact data and
history are automatically transferred, and then “Transfer waiting” is
displayed when “TEL” mode is selected.

● If automatic transfer is successful, “Transferred” is displayed except

for Power off mode.

● If automatic transfer is failed, “Failed to transfer part of contact” or

“Transfer failed” is displayed. 
If phone book memory is full, “Failed to transfer part of contacts” is
displayed.

● Automatic transfer is canceled by pushing 

 (CANCEL) or On-

hook switch.

● When “Display setting” is set to off, it doesn’t display the PBAP

automatic transfer result confirmation. (

→P. 425)

Dialing from call histories

PBAP (Phone Book Access Profile) Automatic Transfer

1

2

1

2

437

5

5-9. Bluetooth

®

 Phone

Au
dio
 sy
stem

Receiving a phone call

Press the off-hook switch.

Press the on-hook switch.

Press the off-hook switch.

Pressing the off-hook switch again returns you to the previous call.

To decrease the volume: Press the “VOL -” button.
To increase the volume: Press the “VOL +” button.

Answering the phone

Refusing the call

Receiving a call when on another call

Adjusting the ring tone volume when receiving a call

438

5-9. Bluetooth

®

 Phone

Speaking on the phone

A call can be transferred between the cellular phone and system while
dialing, receiving a call, or during a call. Use one of the following
methods:
a. Operate the cellular phone.

Refer to the manual that comes with the cellular phone for the operation of
the phone.

b. Press the 

 (PHONE).

*

*

: This operation can be performed only when transferring a call from the cel-

lular phone to the system during a call.

Press  

(MUTE).

Press  

(0-9).

Press the “TUNE >” or “< SELECT” button to select the number,
and then press the “SETUP ENTER” button.

If tone data is saved, press

 

 

(SEND) to send the data all at once.

Press

 

 

(EXIT) to delete the tone data.

When finished, press 

 (BACK) to return to the previous screen.

To decrease the volume: Press the “VOL -” button.
To increase the volume: Press the “VOL +” button.

Transferring a call

Muting your voice

Inputting digits

Setting call volume

1

2

3