Subaru Legacy IV (2008 year). Manual - part 205

 

  Index      Subaru     Subaru Legacy IV - service repair manual 2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  203  204  205  206   ..

 

 

Subaru Legacy IV (2008 year). Manual - part 205

 

 

GD(H4SO)-122

Diagnostic Trouble Code (DTC) Detecting Criteria

GENERAL DESCRIPTION

5. DIAGNOSTIC METHOD

• Abnormality Judgement

If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.

If the difference between the Max. fuel level every 60 s and Min. fuel level every 60 s is less than 2 

2 (0.53

US gal, 0.44 Imp gal), extend 60 s and make judgement with the Max. and Min. values for the fuel level in 60
s × 2. 60 s If a difference does not appear, extend the time (60 s × 3, 60 s × 4, 60 s × 5) and continue the
judgement. If the difference between the Max. fuel level every 60 s and Min. fuel level every 60 s is 2 

2 (0.53

US gal, 0.44 Imp gal) or more, the diagnosis counter counts up.
Time Needed for Diagnosis: 60 s × 16 time(s) or more
Malfunction Indicator Light Illumination:  Illuminates when malfunction occurs in 2 continuous driving cy-
cles.

• Normality Judgement

Judge as OK and clear the NG if the continuous time while the following conditions are established is more
than the predetermined time.

Time Needed for Diagnosis: Less than 1 second

Judgement Value

Malfunction Criteria

Threshold Value

Number of times that the difference 
between the Max. fuel level every 60 s 
and Min. fuel level every 60 s is 2 

2

(0.53 US gal, 0.44 Imp gal) or more (with 
enable condition established)

t 16 time(s)

Maximum – Minimum tank pressure 
(with enable condition completed)

< 0 kPa (0.375 mmHg, 
0 inHg)

Maximum – Minimum fuel temperature 
(with enable condition completed)

t 7 °C (44.6 °F)

Judgement Value

Malfunction Criteria

Threshold Value

Maximum — Minimum tank pressure

t 0 kPa (0.375 mmHg, 
0 inHg)

GD(H4SO)-123

Diagnostic Trouble Code (DTC) Detecting Criteria

GENERAL DESCRIPTION

BJ:DTC P0452 EVAPORATIVE EMISSION CONTROL SYSTEM PRESSURE 

SENSOR LOW INPUT

1. OUTLINE OF DIAGNOSIS

Detect the open or short circuit of the fuel tank pressure sensor.
Judge as NG if out of specification.

2. COMPONENT DESCRIPTION

3. ENABLE CONDITION

4. GENERAL DRIVING CYCLE

Always perform the diagnosis continuously.

(A)

Output voltage

(B)

Input voltage

(C)

To fuel tank

(1)

Connector

(2)

Terminals

Secondary Parameters

Enable Conditions

None

 

EN-04462

(A)

(B)

(2)

(1)

(C)

GD(H4SO)-124

Diagnostic Trouble Code (DTC) Detecting Criteria

GENERAL DESCRIPTION

5. DIAGNOSTIC METHOD

• Abnormality Judgement

If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.

Time Needed for Diagnosis: 15000 ms
Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs.

• Normality Judgement

Judge as OK and clear the NG if the continuous time while the following conditions are established is more
than the predetermined time.

Time Needed for Diagnosis: Less than 1 second

Judgement Value

Malfunction Criteria

Threshold Value

Fuel tank pressure

< –7.4 kPa (–55.6 mmHg, 
–2.2 inHg)

Battery voltage

t 10.9 V

Judgement Value

Malfunction Criteria

Threshold Value

Fuel tank pressure

t –7.4 kPa (–55.6 mmHg, 
–2.2 inHg)

Battery voltage

t 10.9 V

GD(H4SO)-125

Diagnostic Trouble Code (DTC) Detecting Criteria

GENERAL DESCRIPTION

BK:DTC P0453 EVAPORATIVE EMISSION CONTROL SYSTEM PRESSURE 

SENSOR HIGH INPUT

1. OUTLINE OF DIAGNOSIS

Detect the open or short circuit of the fuel tank pressure sensor.
Judge as NG if out of specification.

2. COMPONENT DESCRIPTION

3. ENABLE CONDITION

4. GENERAL DRIVING CYCLE

Perform the diagnosis when purging enable conditions are met without idling.

(A)

Output voltage

(B)

Input voltage

(C)

To fuel tank

(1)

Connector

(2)

Terminals

Secondary Parameters

Enable Conditions

Time needed for all secondary parame-
ters to be in enable conditions

t 5000 ms

Vehicle speed

t 2 km/h (1.2 MPH)

All conditions of EVAP canister purge

Completed

Learning value of evaporation gas con-
centration (left and right)

< 0.08 

Main feedback compensation coefficient 
(left and right)

t 0.9 

Battery voltage

t 10.9 V

EN-04462

(A)

(B)

(2)

(1)

(C)

 

 

 

 

 

 

 

Content   ..  203  204  205  206   ..