Content .. 103 104 105 106 ..

SsangYong: Engine Euro 4. Manual - part 105

CHANGED BY

EFFECTIVE DATE

AFFECTED VIN

DIAGNOSIS

CCCS

1. Vertical sensor upper value of the outside

rearview mirror

2. Sensor value when turned right: Increase

3. Sensor value when turned left: Decrease

* HI value increases or decreases by 1 if ex-

ceeded 8 bit (1~255)

1. Lateral sensor upper value of the outside

rearview mirror

2. Sensor value when moved up: Increase

3. Sensor value when moved down: Decrease

1. Lateral sensor upper value of the outside

rearview mirror

2. Sensor value when moved up: Increase

3. Sensor value when moved down: Decrease

* HI value increases or decreases by 1 when

exceeds 8 bit (1~255)

Indicates current software version

Lateral sensor
value of the driver
side outside
rearview mirror
(LOW)

Vertical sensor
value of the driver
side outside
rearview mirror (HI)

Vertical sensor
value of the driver
side outside
rearview mirror
(LOW)

Software version

Input

No.

Sensor value item

Information

Help

Input/

Output

Sensor value

[value changes within 8 bit

(1~255)]

Sensor value

(increase or decrease by 1)

Sensor value

[value changes within 8 bit

(1~255)]

CHANGED BY

EFFECTIVE DATE

AFFECTED VIN

DIAGNOSIS

CCCS

BRAKE

ECU

TCU

A/BAG

RK-STICS

FFH

R/SENSOR

TGS-LEVER

P/TRUNK

CCCS

DIAGNOSIS OF SUB DICS

Code

Malfunction

Help

- When the power window is locked, the window can be operated

from the passenger side.

(Passenger switch input during the control by DICS-Main while power
window is locking)

- Defective CAN communication

- Check the passenger side door actuator

• Check the method of actuator operation status

- Check the sensor value

• Key lock (DICS-Sub: No. 5)

- Check the passenger side door actuator

• Checking the method of actuator operation status

- Check the sensor value

• Key unlock (DICS-Sub: No. 4)

- When the outside rearview mirror has no UP or DOWN sensor

values, DICS-Main recognizes and disables the vehicle memory
function. However, when the memory input has detected, it means
the sensor is open-circuited or has different mirror has been installed.

- Check the outside rearview mirror UP or DOWN sensor wires

- Measure the sensor values and check the relevant position

• Internal DOWN motor of the outside rearview mirror

(DICS-Sub: No. 13)

• Internal UP motor of the outside rearview mirror

(DICSSub: No. 14)

• Internal sensor of the outside rearview mirror (DICS-Sub: No. 44)

- When the outside rearview mirror has no LEFT or RIGHT sensor

values, DICS-Main recognizes and disables the vehicle memory
function. However, when the memory input has detected, it means
the sensor is open-circuited or has different mirror has been installed.

- Check the outside rearview mirror LEFT or RIGHT sensor wires

- Measure the sensor values and check the relevant position

• Internal RIGHT motor of the outside rearview mirror

(DICSSub: No. 11)

• Internal LEFT motor of the outside rearview mirror

(DICSSub: No. 12)

• Internal sensor of the outside rearview mirror

(DICS-Sub: No. 17)

0 X 07

0 X 08

0 X 09

0 X 0A

0 X 0B

Operates when power window is
locked

Door lock key actuator does not
operate

Door unlock key actuator does
not operate

No mirror UP or DN inputs
correspondence to the memory
switch inputs

No mirror LEFT or RIGHT
inputs correspondence to the
memory switch inputs

CHANGED BY

EFFECTIVE DATE

AFFECTED VIN

DIAGNOSIS

CCCS

Sub DICS Input / Output Data

1. Input signal for the motor protection is

transmitted. The motor output detects increas-
ing current when the motor is stopped at the
lowest position of the passenger side window.

2. Internal input

1. Status of the door lock actuator monitors ring

switch on(passenger side) door trim

2. Ground level when the lock is detected

3. VCC 5V level when the unlock is detected

1. ON when the passenger side door key fob is

unlocked

2. Ground level when operating (unlock)

3. VCC 5V level when not operating (lock)

1. ON when the passenger side door key fob is

locked

2. Ground level when operating

3. VCC 5V level when not operating

1. Switch input signal to lower the passenger side

window

2. DICS SUB drives directly with the circuit

1. Switch input signal to lower the passenger

side window automatically

2. MICOM drives directly according to the above

signal

1. Switch input signal to raise the passenger side

window

2. DICS SUB drives directly with the circuit