SsangYong: Engine Euro 4. Manual - part 101

CHANGED BY

EFFECTIVE DATE

AFFECTED VIN

4

DIAGNOSIS

P/TRUNK

Causes

- The related wiring is damaged.
- The connector is poorly connected or damaged.
- The battery is defective.

Actions

- Check the related wiring for proper connection.
- Check the battery and replace it if necessary.

Power

Trunk

Monitoring

Causes

- The related wiring is damaged.
- The connector is poorly connected or damaged.
- The CAN communication is malfunctioning.
- The PTL ECU is malfunctioning.

Actions

- Check the related wiring for proper connection.
- Replace the PTL ECU.

Cause

- If the DC-gear motor is operated 7 times within 2 minutes, it is considered as misusage and

overheated DC-gear motor.

Action

- The system resumes its operation in 90 seconds.

  Function

System component

DTC

Description

Battery

4

Low battery voltage

Causes

- The related wiring is damaged.
- The connector is poorly connected or damaged.
- The internal temperature sensor in the PTL ECU is malfunctioning.
- The PTL ECU is malfunctioning.

Actions

- Check the related wiring for proper connection.
- Replace the PTL ECU.

Causes

- The related wiring is damaged.
- The connector is poorly connected or damaged.
- The power trunk lamp is malfunctioning.
- The PTL ECU is malfunctioning.

Actions

- Check the related wiring for proper connection.
- Replace the power trunk lamp.
- Replace the PTL ECU.

CAN communication

5

Faulty CAN communication

Power trunk

6

Faulty usage

PTL ECU

7

Faulty temperature detection of unit

PTL ECU

8

Faulty temperature detection of unit

CCCS

CCCS DIAGNOSIS ............................................................................................ 3

STICS Input/Output Monitoring Data ................................................................... 5

DIAGNOSIS OF MAIN DICS ........................................................................... 10

Main DICS Input/Output Monitoring Data .......................................................... 11

DIAGNOSIS OF SUB DICS ............................................................................. 17

Sub DICS Input/Output Data ............................................................................. 18

DIAGNOSIS OF MS-DOS ............................................................................... 20

MSDOS Input/Output Data ................................................................................ 22

DIAGNOSIS OF ESIMS .................................................................................. 25

ESIMS Input/Output Data ................................................................................. 26

TABLE OF CONTENTS

CHANGED BY

EFFECTIVE DATE

AFFECTED VIN

3

DIAGNOSIS

CCCS

BRAKE

ECU

TCU

A/BAG

TC

RK-STICS

FFH

R/SENSOR

FA

T

C

TGS-LEVER

P/TRUNK

CCCS

CCCS DIAGNOSIS

Code

Malfunction

Help

- Check the driver side door actuator

- Check the sensor values

• Driver side door open switch (STICS sensor value: No. 5)

• Door lock switch (STICS sensor value: No. 21)

• Driver door lock switch (STICS sensor value: No. 37)

• Door lock switches other than the driver side door (STICS sensor value: No. 38)

• Door lock (DICS-Main: No. 30)

• Key lock (DICS-Main: No. 32)

- Check the driver side door wires and connectors

- Check the passenger side door actuator

- Check the sensor values

• Passenger side door open switch (STICS sensor value: No. 6)

• Door lock switch (STICS sensor value: No. 21)

• Door lock switches other than the driver side door (STICS sensor value: No. 38)

• Door lock (DICS-Sub: No. 3)

• Key lock (DICS-Sub: No. 5)

- Check the passenger side door wires and connectors

- When one of the two rear seat door knobs is defective

- Check the rear seat door actuator

- Check the sensor values

• Rear door knob switch (STICS sensor value: No. 7)

• Rear right door open switch (STICS sensor value: No. 8)

• Door lock switch (STICS sensor value: No. 21)

• Rear door open switch (STICS sensor value: No. 23)

• Door lock switches other than the driver side door (STICS sensor value: No. 38)

• Door lock switch (DICS-Main sensor value: No. 32)

• Key lock (DICS-Main sensor value: No. 32)

• Door lock (DICS-Sub sensor value: No. 3)

• Key lock (DICS-Sub sensor value: No. 5)

- Check the rear door wires and connectors

- Check the tail lamp relay connector

- Check the sensor values

• Tail lamp switch (STICS sensor value: No. 3)

• Tail lamp signal input status (STICS sensor value: No. 20)

• Tail lamp relay (STICS sensor value: No. 47)

- Check the tail lamp wires and connectors

- The defective code of signals coming from ABS/ESP which senses the

vehicle speed incorrectly due to the exterior noises

- Current vehicle speed (STICS sensor value: No. 58)

- Check the speed sensor connector

- Check the other units (ABS) that use speed signal

- Does not receive the vehicle speed signal from STICS when the ignition

switch is turned off

0 X 01

0 X 02

0 X 03

0 X 04

0 X 05

Driver door lock
knob does not lock

Passenger door
lock knob does not
lock

Rear door lock knob
does not lock

Defective tail lamp
auto off function
(Battery save
function)

Incorrect indication
of the vehicle speed
(Detects as over
300 km/h)