SsangYong Stavic / SsangYong Rodius (2005 year). Manual - part 169

DI10-71

CHANGED BY

EFFECTIVE DATE

AFFECTED VIN

DIAGNOSIS

DI ENG SM - 2004.9

DTC

Trouble

Limp

Home

Mode

Immediately

Engine

Stop

Delayed

Engine

Stop

Torque

Reduction
(max.20%)

Help

Torque

Reduction
(max.50%)

P1630

P1631

P1632

P1633

P0633

Wrong response from Im-
mobilizer (refer to immobi-
lizer section)

Immobilizer Fault (refer to
immobilizer section)

Immobilizer Fault (refer to
immobilizer section)

Immobilizer Fault (refer to
immobilizer section)

Immobilizer Fault (refer to
immobilizer section)

- The invalid key is inserted or no communi-

cation between transponder and immobi-
lizer (no response from transponder).

- Perform the immobilizer coding again.

- Check the ECU wiring harness.

• Check the ECU pin #34 for open and

short.

- Check the immobilizer unit for open and

short or check the supply voltage.

- Check the immobilizer antenna and

transponder for damage.

- Replace the ECU if required.

- The immobilizer is not operating.

- Perform the immobilizer coding again.

- Check the ECU wiring harness.

• Check the ECU pin #34 for open and

short.

- Check the immobilizer unit for open and

short or check the supply voltage.

- Check the immobilizer antenna and

transponder for damage.

- Replace the ECU if required.

- No response from immobilizer.

- Perform the immobilizer coding again.

- Check the ECU wiring harness.

• Check the ECU pin #34 for open and

short.

- Check the immobilizer unit for open and

short or check the supply voltage.

- Check the immobilizer antenna and

transponder for damage.

- Replace the ECU if required.

- No key coding.

- Perform the immobilizer coding again.

- Check the ECU wiring harness.

• Check the ECU pin #34 for open and

short.

- Check the immobilizer unit for open and

short or check the supply voltage.

- Check the immobilizer antenna and

transponder for damage.

- Replace the ECU if required.

- Key memory is not available (permissible

- 5).

- Perform the immobilizer coding again.

- Check the ECU wiring harness.

• Check the ECU pin #34 for open and

short.

- Check the immobilizer unit for open and

short or check the supply voltage.

- Check the immobilizer antenna and

transponder for damage.

- Replace the ECU if required.

DI10-72

CHANGED BY

EFFECTIVE DATE

AFFECTED VIN

DIAGNOSIS

DI ENG SM - 2004.9

DTC

Trouble

Limp

Home

Mode

Immediately

Engine

Stop

Delayed

Engine

Stop

Torque

Reduction
(max.20%)

Help

Torque

Reduction
(max.50%)

P1636

Immobilizer Fault (refer to
immobilizer section)

- Severe trouble is not defined.

- Perform the immobilizer coding again.

- Check the ECU wiring harness.

• Check the ECU pin #34 for open and

short.

- Check the immobilizer unit for open and

short or check the supply voltage.

- Check the immobilizer antenna and

transponder for damage.

- Replace the ECU if required.

DI10-73

CHANGED BY

EFFECTIVE DATE

AFFECTED VIN

DIAGNOSIS

DI ENG SM - 2004.9

INDEX OF DTC

HMF sensor Signal Fault (Electric Failure) .......... DI10-77

P0102 ............................................................ DI10-77

P0103 ............................................................ DI10-77

P0100 ............................................................ DI10-77

Cam Position Sensor (missing event) .................. DI10-78

P0344 ............................................................ DI10-78

Cam Position Sensor Malfunction

(Poor Synchronization of Crank and Cam) ........... DI10-79

P0341 ............................................................ DI10-79

Too Small Clearance of Crank Angle Sensor ........ DI10-80

P0219 ............................................................ DI10-80

Too Large Clearance of Crank Angle Sensor ........ DI10-81

P0336 ............................................................ DI10-81

Crank Angle Sensor Malfunction .......................... DI10-82

P0372 ............................................................ DI10-82

Barometric Sensor Malfunction (Out of range, using

strategy of restoring by MAP sensor) .................. DI10-83

P1107 ............................................................ DI10-83

P1108 ............................................................ DI10-83

P1105 ............................................................ DI10-83

Battery Voltage Monitoring Signal Malfunction ..... DI10-84

P0562 ............................................................ DI10-84

P0563 ............................................................ DI10-84

P0560 ............................................................ DI10-84

Booster Pressure Sensor Malfunction

(Out of range with Key ON) ................................. DI10-86

P0109 ............................................................ DI10-86

P0106 ............................................................ DI10-86

Booster Pressure Sensor Malfunction

(Out of range with Key ON) ................................. DI10-88

P0107 ............................................................ DI10-88

P0108 ............................................................ DI10-88

P0105 ............................................................ DI10-88

P1106 ............................................................ DI10-88

Booster Pressure Malfunction

(Implausible Signal) ............................................. DI10-90

P1109 ............................................................ DI10-90

Brake Pedal Switch Malfunction .......................... DI10-92

P0571 ............................................................ DI10-92

Brake Lamp Signal Fault ..................................... DI10-93

P1572 ............................................................ DI10-93

P1571 ............................................................ DI10-93

High Wiring Resistance (Injector #1) ................... DI10-94

P1286 ............................................................ DI10-94

P1287 ............................................................ DI10-94

High Wiring Resistance (Injector #2) ................... DI10-95

P1288 ............................................................ DI10-95

P1289 ............................................................ DI10-95

High Wiring Resistance (Injector #3) ................... DI10-96

P1292 ............................................................ DI10-96

P1293 ............................................................ DI10-96

High Wiring Resistance (Injector #4) ................... DI10-97

P1294 ............................................................ DI10-97

P1295 ............................................................ DI10-97

High Wiring Resistance (Injector #5) ................... DI10-98

P1290 ............................................................ DI10-98

P1291 ............................................................ DI10-98

Clutch Switch Malfunction ................................... DI10-99

P0704 ............................................................ DI10-99

Coolant Temperature Sensor Malfunction

(Implausible Signal) ........................................... DI10-100

P1115 ........................................................... DI10-100

Coolant Temperature Sensor Malfunction

(Electric Fault) .................................................. DI10-101

P0117 .......................................................... DI10-101

P0118 .......................................................... DI10-101

P0115 .......................................................... DI10-101

Too Fast or Low Main Relay Operation .............. DI10-102

P0685 .......................................................... DI10-102

EGR Actuator Malfunction ................................. DI10-103

P1405 .......................................................... DI10-103

P1406 .......................................................... DI10-103

Condenser Fan Driving Signal Fault (Type 1) ..... DI10-104

P1480 .......................................................... DI10-104

P1481 .......................................................... DI10-104

P1482 .......................................................... DI10-104

DI10-74

CHANGED BY

EFFECTIVE DATE

AFFECTED VIN

DIAGNOSIS

DI ENG SM - 2004.9

Condenser Fan Driving Signal Fault (Type 2) ..... DI10-105

P1526 .......................................................... DI10-105

P1527 .......................................................... DI10-105

P1528 .......................................................... DI10-105

#1 Accelerometer Malfunction

(Idling Signal/Too Small Noise Ratio) ................. DI10-106

P0325 .......................................................... DI10-106

#2 Accelerometer Malfunction

(Idling Signal/Too Small Noise Ratio) ................. DI10-107

P0330 .......................................................... DI10-107

Injector Bank 1 Malfunction

(Short to Ground or B+) ..................................... DI10-108

P1611 .......................................................... DI10-108

P1612 .......................................................... DI10-108

Injector Bank 2 Malfunction

(Short to Ground or B+) ..................................... DI10-110

P1618 .......................................................... DI10-110

P1619 .......................................................... DI10-110

Cylinder Balancing Fault (Injector #1) =

Clogged Air Intake System ................................ DI10-112

P0263 .......................................................... DI10-112

Cylinder Balancing Fault (Injector #2) =

Clogged Air Intake System ................................ DI10-113

P0266 .......................................................... DI10-113

Cylinder Balancing Fault (Injector #4) =

Clogged Air Intake System ................................ DI10-114

P0272 .......................................................... DI10-114

Cylinder Balancing Fault (Injector #5) =

Clogged Air Intake System ................................ DI10-115

P0275 .......................................................... DI10-115

Cylinder Balancing Fault (Injector #3) =

Clogged Air Intake System ................................ DI10-116

P0269 .......................................................... DI10-116

Open Circuit (Injector #1) ................................... DI10-117

P0201 .......................................................... DI10-117

Open Circuit (Injector #2) ................................... DI10-118

P0202 .......................................................... DI10-118

Open Circuit (Injector #4) ................................... DI10-119

P0204 .......................................................... DI10-119

Open Circuit (Injector #5) ................................... DI10-120

P0205 .......................................................... DI10-120

Open Circuit (Injector #3) ................................... DI10-121

P0203 .......................................................... DI10-121

HSD Circuit Short to LSE (Injector #1) .............. DI10-122

P1201 .......................................................... DI10-122

HSD Circuit Short to LSE (Injector #2) .............. DI10-123

P1202 .......................................................... DI10-123

HSD Circuit Short to LSE (Injector #4) .............. DI10-124

P1204 .......................................................... DI10-124

HSD Circuit Short to LSE (Injector #5) .............. DI10-125

P1205 .......................................................... DI10-125

HSD Circuit Short to LSE (Injector #3) .............. DI10-126

P1203 .......................................................... DI10-126

Fuel Temperature Sensor Malfunction ................ DI10-127

P0182 .......................................................... DI10-127

P0183 .......................................................... DI10-127

P0180 .......................................................... DI10-127

Glow Plug Malfunction (Driving Signal) .............. DI10-128

P1678 .......................................................... DI10-128

P1679 .......................................................... DI10-128

Heater 1 Malfunction (Driving Signal) ................. DI10-129

P1530 .......................................................... DI10-129

P1531 .......................................................... DI10-129

P1532 .......................................................... DI10-129

Heater 2 Malfunction (Driving Signal) ................. DI10-130

P1534 .......................................................... DI10-130

P1535 .......................................................... DI10-130

P1536 .......................................................... DI10-130

Rail Pressure Control Fault

(Too High Pressure) ........................................... DI10-131

P1254 .......................................................... DI10-131

P1253 .......................................................... DI10-131

Rail Pressure Control Fault

(Too High IMV Current Trim, drift) ....................... DI10-133

P1256 .......................................................... DI10-133

P1257 .......................................................... DI10-133

P1258 .......................................................... DI10-133

P1259 .......................................................... DI10-133

Rail Pressure Control Fault

(Too Slow Pressure Build Up while Cranking) .... DI10-135

P1191 .......................................................... DI10-135