|
|
1F1-14 M162 ENGINE CONTROLS Failure code Item Checking method Test step Requirement Specified value Possible cause ⇒ 9.0 • Keep the engine run above 2 minutes in over 80 ° C of coolant temperature. 6.0 - 7.0 V •
ECU •
Cable •
Oxygen sensor •••••
Oxygen sensor: - Signal 80, 81, 82, 83, 89, 5 60 ⇒ 8.0 • Engine:in cranking or idle 5 60 •
Cable •
ECU •••••
ECU: - RPM signal output 32, 33, refer to figure 2 ⇒ 10.0 • Keep the engine run above 2 minutes in over 80 ° C of coolant temperature. •••••
Oxygen sensor: - Heating function operated ⇒ 11.0 •••••
No.1 cylinder injector: - Operating & injection time • When the coolant temperature is approx. 20 ° C: - Engine:in cranking 8.0 ms •
Cable •
ECU •
No.1 Injector •
Coolant temperature sensor •
Oxygen sensor •
Intake air temperature sensor - Voltage • Engine:in cranking or idle (above 5V in idling) 16 17 5 9 9 11 •
Ignition:ON 11 - 14 V •
ECU •
Cable •
Oxygen sensor - Current consumption 0.2 - 2.0 A 72, 73, 63 11 • When the coolant temperature is approx. 80 ° C: - Engine:at idling speed - Engine:at sharp acceleration(full throttle) (refer to figure 3 and 4) approx. 2.7 - 5.0ms approx. 14ms There will be a voltage fluctuation in the range of - 0.2 -1.0V 85, 86, 87, |