Двигатели Scania четвёртой серии. Руководство - часть 161

82

ã

03:04-06

Fault code D302

Fault

The fuel volume solenoid valve on the front 
bank, cylinder 1-3 is faulty.

Cause

Open circuit to pin 1 and 2 on connector B2.

Remarks

As a result, the engine only runs on three 
cylinders.

Action

Check the wiring and clean the connectors.

Clear the fault code memory. Start the engine 
and accelerate the engine to full speed.

If the fault remains, renew the fuel volume 
solenoid valve.

Fault code D303

Fault

The fuel volume solenoid valve on the front 
bank, cylinder 1-3 is faulty.

Cause

Monitoring pin 1 and 2 on connector B2 
indicates implausible values compared to other 
solenoid valves.

Remarks

As a result, the engine runs very unevenly.

Action

Check the wiring and clean connector A1, B2 
and the connector to the solenoid valve.

Clear the fault code memory. Start the engine 
and accelerate the engine to full speed.

If the fault remains, first renew the control unit 
and if necessary the fuel volume solenoid 
valve.

Fault codes

03:04-06

ã

83

Fault code D304

Fault

The fuel volume solenoid valve on the front 
bank, cylinder 1-3 is faulty.

Cause

Monitoring pin 1 and 2 on connector B2 
indicates that the voltage is too low to control 
the solenoid valve.

Remarks

As a result, the engine will probably run 
unevenly.

The engine torque is limited by approximately 
30%.

Action

If fault code 3201 is also present, low battery 
voltage is active, rectify the battery fault first.

Check the wiring and clean connector A1, B2 
and the connector to the solenoid valve.

Clear the fault code memory. Start the engine 
and accelerate the engine to full speed.

If the fault remains, first renew the fuel volume 
solenoid valve and if necessary the control unit.

Fault codes

84

ã

03:04-06

Fault code D400

Fault

The fuel volume solenoid valve on the rear 
bank, cylinder 4-6 is faulty.

Cause

Short circuit to +24 V alternatively between pin 
4 and 5 on connector A1.

Remarks

As a result, the engine runs very unevenly.

Action

Check the wiring and clean the connectors.

Clear the fault code memory. Start the engine 
and accelerate the engine to full speed.

If the fault remains, renew the fuel volume 
solenoid valve.

Fault code D401

Fault

The fuel volume solenoid valve on the rear 
bank, cylinder 4-6 is faulty.

Cause

Pin 4 and 5 on connector A1 shorted to earth.

Remarks

As a result, the engine runs very unevenly.

Action

Check the wiring and clean the connectors.

Clear the fault code memory. Start the engine 
and accelerate the engine to full speed.

If the fault remains, renew the fuel volume 
solenoid valve.

Fault codes

03:04-06

ã

85

Fault code D402

Fault

The fuel volume solenoid valve on the rear 
bank, cylinder 4-6 is faulty.

Cause

Open circuit to pin 4 and 5 on connector A1.

Remarks

As a result, the engine only runs on three 
cylinders.

Action

Check the wiring and clean the connectors.

Clear the fault code memory. Start the engine 
and accelerate the engine to full speed.

If the fault remains, renew the fuel volume 
solenoid valve.

Fault code D403

Fault

The fuel volume solenoid valve on the rear 
bank, cylinder 4-6 is faulty.

Cause

Monitoring pin 4 and 5 on connector A1 
indicates implausible values compared to other 
solenoid valves.

Remarks

As a result, the engine runs very unevenly.

Action

Check the wiring and clean connector A1, B2 
and the connector to the solenoid valve.

Clear the fault code memory. Start the engine 
and accelerate the engine to full speed.

If the fault remains, first renew the control unit 
and if necessary the fuel volume solenoid 
valve.

Fault codes