|
|
19 - 12 19 COOLING - EXHAUST - FUEL TANK D ISMOUNTING The car is set on a two-column lifting stand. - the distribution belt (see Chapter “Distribution belt”); The water-pump is taken out at the upper end of the engine compartment. S PECIAL
DEVICES MOT. 1202-02 Pincers for elastic collars TIGHTENING COUPLES (daNm) Screw-nut for extending pulley / runner 5 Screw for the crankshaft pulley 2+68 o +/-6 o Screws for right-side pendular stand 6.2 Screw-nut for hydro-elastic buffer 4.4 Screws for water-pump 2.2 Screw-nuts for water-pump 1 Screws for wheels 7.5 WATER PUMP |