Peugeot 3008 (2024 year). Manual in english

Contents

Overview ■

Front seats

Safety 5

Steering wheel adjustment

General safety recommendations

Mirrors

Hazard warning lamps

Eco-driving ■

Rear bench seat

Horn

Rear seats

Pedestrian horn (Hybrid or Rechargeable

Seat modularity

hybrid)

Dashboard instruments 1

Heating and Ventilation

Emergency or assistance

Driver information

Dual-zone automatic air conditioning

Event Data Recording system

Digital instrument panels

Front demisting/defrosting

Electronic stability control (ESC)

Warning and indicator lamps

Heated windscreen

Advanced Grip Control

Indicators

Rear screen demisting/defrosting

Hill Assist Descent Control

Manual test

Temperature pre-conditioning

Seat belts

Distance recorders

(Rechargeable hybrid)

Airbags

Lighting dimmer

Front fittings

Child seats

101

Trip computer

Courtesy lamps

Deactivating the front passenger airbag

103

Touch screen

Interior ambient lighting

ISOFIX child seats

106

Remotely operable additional functions

Rear fittings

i-Size child seats

112

(Rechargeable hybrid)

Boot fittings

Child lock

113

Access 2

Lighting and visibility 4

Driving 6

Electronic key with remote control function

Lighting control stalk

Driving recommendations

115

and built-in key

Direction indicators

Starting/switching off the engine

116

Keyless Entry and Start

Headlamp beam height adjustment

Starting rechargeable hybrid vehicles

117

Central locking

Automatic illumination of headlamps

Electric parking brake

119

Back-up procedures

Guide-me-home and welcome lighting

6-speed manual gearbox

121

Doors

Automatic lighting systems - General

Automatic gearbox (type 1)

121

Boot

recommendations

Automatic gearbox (type 2)

124

Hands-free tailgate

Automatic headlamp dipping

Automatic gearbox (type 3)

128

Alarm

Static cornering lighting

Hill start assist

131

Electric windows

Night Vision

Driving modes

132

Panoramic sunroof

Wiper control stalk

Gear shift indicator

134

Automatic wipers

Stop & Start (Petrol or Diesel)

134

Changing a wiper blade

e-Auto mode (Hybrid)

136

Ease of use and comfort 3

Tyre under-inflation detection

136

Driving position

Contents

Driving and manoeuvring aids - General

Checking levels

197

Media

246

recommendations

138

Checks

199

Telephone

247

Memorising speeds

139

AdBlue® (BlueHDi)

201

Settings

250

Road signs recognition

139

Free-wheeling

203

Frequently asked questions

252

Speed limiter

143

Advice on care and maintenance

204

Cruise control - Specific recommendations

145

Cruise control

146

PEUGEOT Connect Nav 11

Drive Assist Plus

147

In the event of a breakdown 8

First steps

254

Adaptive cruise control

148

Warning triangle

207

Steering mounted controls

255

Lane positioning assist

152

Running out of fuel (Diesel)

207

Menus

255

Lane keeping assist

155

Tool kit

207

Voice commands

257

Active Safety Brake with Collision Risk Alert and

Temporary puncture repair kit

210

Navigation

260

Intelligent emergency braking assistance

158

Spare wheel

213

Connected navigation

263

Distraction detection

161

Changing a bulb

218

Applications

265

Blind spot monitoring

163

Fuses

221

Radio

268

Parking sensors

165

12 V battery/Accessory batteries

221

DAB (Digital Audio Broadcasting) radio

269

Visiopark 1 - Visiopark 2

166

Towing the vehicle

229

Media

269

Park Assist

171

Telephone

271

Settings

273

Technical data

Frequently asked questions

275

Practical information 7

Engine technical data and towed loads

233

Compatibility of fuels

175

Petrol engines

234

Refuelling

175

Diesel engines

236

Vehicle data recording and privacy 12

Misfuel prevention (Diesel)

176

Hybrid engines

237

Hybrid system

177

Rechargeable hybrid engines

238

Rechargeable hybrid system

179

Dimensions

239

Alphabetical index ■

Charging the traction battery (Rechargeable

Identification markings

240

hybrid)

187

Towing device

189

Appendix ■

Towing device with quickly detachable towball

190

PEUGEOT Connect Radio 10

Roof bars

192

First steps

241

Snow chains

193

Steering mounted controls

242

Very cold climate screen

194

Menus

243

Energy economy mode

195

Applications

244

Bonnet

195

Radio

244

Engine compartment

196

DAB (Digital Audio Broadcasting) radio

246

Overview

Presentation

1. Sunroof and blind controls

6. Hill Assist Descent Control

Front courtesy/map reading lamps

7. Electric parking brake

These illustrations and descriptions are intended

Warning lamp display for seat belts and front

as a guide. The presence and location of some

Steering-mounted controls

passenger airbag

elements vary depending on the version or trim

Emergency call/Assistance call

level.

2. Interior rear view mirror

Instruments and controls

3. Head-up digital display

4. Fusebox

5. Bonnet release

6. Door mirror and electric window control panel

7. Front passenger airbag

8. Glove box

Deactivation of the front passenger airbag

Centre console

1. External lighting controls/Direction indicators

2. Wiper controls/Screenwash/Trip computer

3. Automatic gearbox control paddles

4. Horn/Driver front airbag

5. Controls for Cruise control/Speed limiter/

Adaptive cruise control

6. Instrument panel and audio system

adjustment controls

8" or 10" HD touch screen

A. Select the instrument panel display mode

12 V socket/USB socket

B. Voice commands

Wireless smartphone charger

C. Decrease/Increase volume

3. "START/STOP" button

D. Select previous/next media

4. Drive mode selector

Confirm a selection

5. Gearbox

Overview

Central switch panel

E. Access the Telephone menu

Hybrid system

Manage calls

F. Select an audio source

G. Display the list of radio stations/audio tracks

Side switch panel

1. Hazard warning lamps

2. Touch screen controls

Access to the Energy menu

1. Petrol engine

3. Front demisting/defrosting

2. Electric motor

4. Recirculation of interior air

6-speed electric dual-clutch automatic

5. Rear screen defrosting

gearbox (e-DCS6)

1. Headlamp beam height adjustment

6. Central locking

48 V traction battery

2. Temperature pre-conditioning operation

7. Heated seats

12 V accessory battery

indicator lamp

3. Opening/Closing the hands-free tailgate

6. DC/DC converter

4. Alarm

7. Belt starter

5. Heated windscreen

The 48 V hybrid technology requires no

6. Electric child lock

connection to charge the traction battery.

7. Lane keeping assist

The Hybrid system does not operate

8. Lane positioning assist

continuously, but is activated according to

9. Opening the fuel filler flap

the state of the vehicle, the state of charge

of the traction battery, the thermal comfort of

the passenger compartment (switching on

the heating or air conditioning), the driving

conditions (acceleration, deceleration, braking,

engine start-up) and the road conditions (uphill,

downhill):

Overview

- The vehicle always starts with the petrol

The electric power alone provides the mobility

Rechargeable hybrid

engine to ensure the efficiency of the catalytic

of the vehicle in Electric mode, and in Hybrid

converter and the availability of the brake assist.

system

mode in case of moderate demand. It assists the

- In normal driving, the petrol engine and

petrol engine during starting and acceleration

electric motor work together or separately to

phases.

optimise fuel consumption and electrical energy

The electric power is supplied by a rechargeable

or to charge the traction battery.

traction battery.

- During the acceleration phases, the electric

motor provides an additional boost to reach

Labels

the torque needed as fast as possible and to

improve the acceleration at low speed.

“Ease of use and comfort - Rear bench seat -

- During the deceleration phases, the electric

Rear head restraints” section:

motor charges the traction battery, using the

inertia of the vehicle.

- The driving in all-electric is possible for parking

1. Petrol engine

“Ease of use and comfort - Third row seats”

manoeuvring, for 20 mph (30 km/h) speed zones

2. Front and rear electric motors (depending on

section:

in city, on urban and country roads with smooth

version)

driving and on motorways in slight deceleration

3. Traction battery

or downhill.

12 V accessories batteries

The electric motor is integrated into the

8-speed electric automatic gearbox (e-EAT8)

automatic gearbox.

6. Charging flap

The DC/DC converter provides the link between

7. Fuel filler flap

the 12 V accessory power supply and the 48 V

8. Driving mode selector

traction power supply.

"Ease of use and comfort - Front fittings -

9. Domestic charging cable

The belt starter restarts the petrol engine after

Wireless smartphone charger" section:

driving in all-electric.

The rechargeable hybrid technology combines

two sources of energy: that of the petrol engine

and that of one or two electric motors (depending

"Lighting and visibility - Exterior lighting

on version).

control stalk" and "In the event of a

The engine and the motor can operate

breakdown - Changing a bulb" sections:

alternately or simultaneously, according to the

driving mode selected and the driving conditions.

Overview

"In the event of a breakdown - Spare wheel"

section:

"Safety - General safety recommendations -

"Practical information - Rechargeable hybrid

"In the event of a breakdown - 12 V battery/

Installing electrical accessories" section:

system" section:

Accessory batteries" section:

"Safety - Child seats - Deactivating the front

24V

passenger airbag" section:

12V

"Practical information - Charging the traction

battery (Rechargeable hybrid)" section:

"Practical information - Bonnet" section:

"Safety - ISOFIX mountings" section:

i-Size

TOP TETHER

"Driving - Electric parking brake" section:

"In the event of a breakdown - Temporary

puncture repair kit" section:

"Driving - Stop & Start" section:

"Practical information - Compatibility of

fuels" section:

Eco-driving

When the traffic is flowing smoothly, select the

Limit the causes of excess consumption

Eco-driving

cruise control.

Spread loads throughout the vehicle. Place the

Eco-driving refers to a range of everyday

Control the use of electrical equipment

heaviest items in the boot as close as possible to

practices that allow the motorist to optimise

the rear seats.

the vehicle's energy consumption (fuel and/or

Before moving off, if the passenger compartment

Limit the loads carried in the vehicle and

electricity) and CO₂ emissions.

is too warm, ventilate it by opening the windows

minimise wind resistance (e.g. roof bars, roof

and air vents before using the air conditioning.

Optimise your use of the gearbox

rack, bicycle carrier, trailer). Preferably, use a

At speeds above 31 mph (50 km/h), close the

With a manual gearbox, move off gently and

roof box.

windows and leave the air vents open.

change up promptly. While accelerating, change

Remove roof bars and roof racks after use.

Consider using equipment that can help keep

up early.

At the end of winter, remove snow tyres and refit

the temperature in the passenger compartment

With an automatic gearbox, favour automatic

summer tyres.

down (e.g. sunroof blind, window blinds).

mode. Do not depress the accelerator pedal

Avoid using the Dynamic Pack for too long, in

Unless automatically regulated, switch off the air

heavily or suddenly.

order to limit your energy consumption.

conditioning as soon as the desired temperature

The gear shift indicator prompts you to engage

has been reached.

Comply with the servicing instructions

the most suitable gear. Whenever this indication

Switch off the demisting and defrosting functions,

Check tyre pressures regularly, with the tyres

is displayed on the instrument panel, follow it

if they are not managed automatically.

cold, referring to the label in the door aperture on

straight away.

Switch off the heated seat as soon as possible.

the driver's side.

With an automatic gearbox, this indicator

Adapt your use of the headlamps and/or

Carry out this check in particular:

appears only in manual mode.

foglamps to the level of visibility, in accordance

- before a long journey.

Drive smoothly

with current legislation in the country in which

- at each change of season.

Maintain a safe distance between vehicles, use

you are driving.

- after a long period out of use.

engine braking rather than the brake pedal and

Avoid running the engine before moving off,

Do not forget the spare wheel and, where

press the accelerator gradually. These practices

particularly in winter (other than in severe wintry

applicable, the tyres on your trailer or caravan.

help to save on energy consumption, reduce

conditions: temperature below -23°C). The

Have your vehicle serviced regularly (e.g. engine

CO₂ emissions and decrease general traffic

vehicle will warm up much faster while driving.

oil, oil filter, air filter, passenger compartment

noise.

As a passenger, avoid connecting your

filter, etc.). Observe the schedule of operations in

With a hybrid engine, engine braking is more

multimedia devices (e.g. film, music, video

the manufacturer's service schedule.

efficient. Anticipate slowing down as much as

game) to help reduce the consumption of energy.

With a BlueHDi Diesel engine, if the SCR system

you can and, if possible, favour deceleration with

Disconnect all portable devices before leaving

has a fault, your vehicle will emit pollution. Visit

engine braking in order to charge the traction

the vehicle.

a PEUGEOT dealer or a qualified workshop

battery, to increase all-electric driving and to

as soon as possible to restore your vehicle's

reduce fuel consumption.

nitrogen oxide emissions to legal levels.

Eco-driving

When filling the fuel tank, do not continue after

Connect the vehicle as soon as possible.

the third cut-out of the nozzle, to avoid overflow.

Anticipate slowing down as much as possible

You will only see the fuel consumption of your

and, if possible, favour decelerations with the

new vehicle settle down to a consistent average

regenerative braking function activated (power

after the first 1,900 miles (3,000 kilometres).

indicator in the CHARGE zone).

With the vehicle connected, carry out

Optimising the driving range of electrified

temperature pre-conditioning before setting off.

vehicles

To optimise consumption during a journey:

The vehicle's consumption of electrical energy

► Program a destination into the vehicle’s GPS

greatly depends on the route profile, speed and

navigation system.

driving style, as well as the use of the heating/air

► Select the Hybrid driving mode.

conditioning.

► Make sure that the battery charge level is

Favour the ECO and CHARGE zones of the

close to maximum.

power indicator by driving smoothly and at a

► Avoid using the e-Save function.

steady speed.

► Use the heating/air conditioning system

Hybrid vehicles

wisely.

Maximise the vehicle's inertia by releasing the

accelerator pedal so that the vehicle slows

down by itself (e.g. when driving downhill or

approaching a traffic light).

When the accelerator pedal is released, provided

that the slider on the power indicator in the

instrument panel is still moving in the CHARGE

zone, energy recovery is optimal.

Energy recovery makes it possible to make

efficient use of the "passive" phases of driving

(deceleration).

The recovered energy is used to recharge the

traction battery and is then used for all-electric

driving or further acceleration.

When the traction battery is almost full, the

energy recovery is gradually reduced.

Rechargeable hybrid vehicles

Dashboard instruments

With the "Energy" display mode (Hybrid)

Hybrid or Rechargeable hybrid

Driver information

In all-electric driving mode, the speed is

Instrument panel

displayed in blue instead of white when the

petrol engine is running.

The instrument panel displays all the information

the driver needs about the status of the vehicle's

Buttons

various systems.

This information appears in the form of warning

A. Instrument panel ambient lighting on/off

With the "Energy" display mode

and indicator lamps and messages.

B. Short press: start a manual test

(Rechargeable hybrid)

The instrument panel is in the form of a fully

Long press: reset the service indicator or trip

Fuel gauge (Petrol or Diesel)

digital screen.

distance recorder (depending on the context)

Fuel gauge and remaining range (miles or

km) (Hybrid or Rechargeable hybrid)

Head-up digital display

Speedometer (mph or km/h)

Displays

READY indicator lamp (Rechargeable hybrid)

Most warning and indicator lamps do not have a

These digital instrument panels can be

Gear shift indicator (arrow and recommended

fixed position.

customised.

gear)

The warning and indicator lamps in the second

Depending on the display mode selected, certain

Selector position on automatic gearbox

line are displayed from right to left in order of

information is not displayed or is presented

Rev counter (x 1,000 rpm) (Petrol or Diesel)

priority.

differently.

Power indicator (Hybrid or Rechargeable

For certain functions that have indicator lamps

Dials and gauges

hybrid)

for both operation and deactivation, there is only

Engine coolant temperature indicator (°C)

one dedicated location.

(Petrol, Diesel or Hybrid)

Permanent information

Battery charge level and remaining range

In the standard display, the instrument panel

(miles or km) indicator (Rechargeable hybrid)

shows:

Trip distance recorder (miles or km)

- in fixed locations:

Total distance recorder (miles or km)

With the "Dials" display mode (Petrol or

• Information related to the gearbox and gear

Cruise control or speed limiter settings

Diesel)

shift indicator.

Display of speed limit signs

• Fuel gauge.

Driving mode selected (other than Normal

• Coolant temperature indicator (Petrol, Diesel

mode)

or Hybrid).

Energy flows (Hybrid or Rechargeable hybrid)

• Battery charge level and range indicator

(Rechargeable hybrid).

Dashboard instruments

• Power indicator (Hybrid or Rechargeable

When travelling abroad, the speed must be

various modes on the right-hand side of the

hybrid).

shown in the official units of the country you

instrument panel.

• Distance recorders.

are driving in (mph, miles or km/h, km).

► Press the thumbwheel to confirm the mode.

- in variable locations:

The new display mode is applied immediately.

• Digital speedometer.

As a safety measure, these adjustments

Display modes

• Status or alert messages displayed

must be carried out with the vehicle

- "Dials": standard display of analogue and

temporarily.

stationary.

digital speedometers, distance recorders and:

Optional information

• fuel gauge, coolant temperature indicator

Depending on the selected display mode and

Choosing the display colour

and rev counter (Petrol or Diesel).

active features, additional information may be

• fuel gauge, coolant temperature indicator

Depending on version, the instrument panel

displayed:

and power indicator (Hybrid).

display colour depends on the colour scheme

- Rev counter (Petrol or Diesel).

• fuel gauge, battery charge level indicator and

chosen in this system.

- Trip computer.

power indicator (Rechargeable hybrid).

This function is set via the Settings touch

- Driving aid functions.

- "Navigation": specific display, showing current

screen menu.

- Speed limiter or cruise control.

navigation information (map and instructions).

- Media currently playing.

Choosing the display mode

- "Driving": specific display, showing

- Navigation instructions.

information relating to active driving aid systems.

In each mode, specific types of information are

- Engine information from the Dynamic Pack.

- "Night vision": minimal display with infrared

displayed on the instrument panel.

- Night Vision function.

camera image (associated with the Night Vision

- Energy flows (Hybrid or Rechargeable hybrid).

function).

- "Minimum": minimal display with digital

Personalising the

speedometer and distance recorders, and in the

event of a warning only, fuel gauge and coolant

instrument panel

temperature indicator (depending on version).

Depending on version, the appearance of the

- "Energy": specific display, showing a visual

instrument panel can be modified (colour and/or

representation of the vehicle’s energy flows

display mode).

(Hybrid or Rechargeable hybrid).

Display language and units

- "Personal": minimal display, with the ability

These depend on the touch screen

to select and display optional information in the

settings.

personalisable areas on the left and right.

► Turn the thumbwheel on the left of the

Configuring a "Personal" display mode

steering wheel to display and scroll through the

With PEUGEOT Connect Radio

Dashboard instruments

► Press Settings in the banner of the

If a lamp remains lit

Warning and indicator

touch screen.

The references (1), (2) and (3) in the warning

► Select "Configuration".

lamps

and indicator lamp description indicate whether

Displayed as symbols, the warning and indicator

you should contact a qualified professional in

► Select "Instrument panel

lamps inform the driver of the occurrence of a

addition to the immediate recommended actions.

personalisation".

malfunction (warning lamps) or of the operating

(1): You must stop the vehicle.

With PEUGEOT Connect Nav

status of a system (operation or deactivation

Stop as soon as it is safe to do so and switch off

► Press Settings in the banner of the

indicator lamps). Certain lamps light up in two

the ignition.

touch screen.

ways (fixed or flashing) and/or in several colours.

(2): Contact a PEUGEOT dealer or a qualified

► Select "OPTIONS".

Associated warnings

workshop.

► Select "Instrument panel

(3): Go to a PEUGEOT dealer or a qualified

personalisation".

The illumination of a lamp may be accompanied

workshop.

► For each personalised display area (left and

by an audible signal and/or a message displayed

right), select a type of information using the

in a screen.

List of warning and

corresponding scroll arrows on the touch screen:

Relating the type of alert to the operating status

of the vehicle allows you to determine whether

indicator lamps

• "Driving aids".

• "Engine info" (depending on version).

the situation is normal or whether a fault has

Red warning/indicator lamps

• "G-metres" (depending on version).

occurred: refer to the description of each lamp

for further information.

STOP

• "Temperatures" (engine oil).

Fixed, associated with another warning

• "Media".

When the ignition is switched on

lamp, accompanied by the display of a

• "Navigation".

Certain red or orange warning lamps come on

message and an audible signal.

• "Trip computer".

for a few seconds when the ignition is switched

A serious fault with the engine, braking system,

• "Rev counter".

on. These warning lamps should go off as soon

power steering or automatic gearbox or a major

• "Hybrid flows" (depending on version).

as the engine is started.

electrical fault has been detected.

• "Power indicator" (depending on version).

For more information on a system or a function,

Carry out (1) and then (2).

• "Accessories consumption" (depending on

refer to the corresponding section.

version).

Maximum coolant temperature

• "Night vision".

Fixed.

Persistent warning lamp

► Confirm to save and exit.

The temperature of the cooling system is

If a red or orange warning lamp comes on, there

"Personal" mode is displayed immediately.

too high.

may be fault which needs further investigation.

Carry out (1), then wait until the engine has

cooled down before topping up the level, if

necessary. If the problem persists, carry out (2).

Dashboard instruments

Engine oil pressure

Fixed when the ignition is switched on,

Electric parking brake

Fixed.

accompanied by a message.

Fixed.

There is a fault with the engine lubrication

It is not possible to start the vehicle while the

The electric parking brake is applied.

system.

charging cable is connected to the vehicle’s

Flashing.

Carry out (1) and then (2).

connector.

Application/release is faulty.

Disconnect the charging cable and close the

Carry out (1): park on flat ground (on a level

Traction battery overheating (Hybrid or

flap.

surface).

Rechargeable hybrid)

With a manual gearbox, engage a gear.

Fixed, combined with the STOP

12V battery charge

With an automatic gearbox, select mode P.

warning lamp, accompanied by the

Fixed.

Switch off the ignition and carry out (2).

display of a message and an audible signal.

The battery charging circuit is faulty

The traction battery's temperature is too high.

(e.g. dirty terminals, loose or severed alternator

Braking

Carry out (1).

belt).

Fixed.

Evacuate the vehicle as quickly as possible

Carry out (1).

The brake fluid level in the braking circuit

and move to a safe distance.

If the electric parking brake stops working,

has dropped significantly.

Carry out (2).

immobilise the vehicle:

Carry out (1), then top up with fluid that complies

Traction battery malfunction (Hybrid or

► With the manual gearbox, engage a gear.

with the manufacturer's recommendations. If the

Rechargeable hybrid)

► With the automatic gearbox, fit the chocks

problem persists, carry out (2).

Fixed, combined with the Service

against one of the wheels.

Fixed.

warning lamp, accompanied by the

Clean and tighten the terminals. If the warning

The electronic brake force

display of a message.

lamp does not go off when the engine is started,

distribution (EBFD) system is faulty.

The traction battery has a fault.

carry out (2).

Carry out (1) and then (2).

Carry out (2).

Door(s) open

Orange warning/indicator lamps

Fixed, associated with a message

System malfunction (Hybrid or

Service

identifying the access.

Rechargeable hybrid)

Temporarily on, accompanied by the

An audible signal supplements the alert if the

Fixed.

display of a message.

speed is higher than 6 mph (10 km/h).

The hybrid system is faulty.

One or more minor faults, for which there is/are

A door or the boot is not properly closed.

Carry out (1) and then (2).

no specific warning lamp(s), have been detected.

Cable connected (Rechargeable hybrid)

Seat belts not fastened/unfastened

Identify the cause of the fault using the message

Fixed when the ignition is switched on.

Fixed or flashing, accompanied by an

displayed on the instrument panel.

The charging cable is connected to the

increasing audible signal.

You may be able to deal with some faults

vehicle's connector.

A seat belt has not been fastened or has been

yourself, such as changing the battery in the

unfastened.

remote control.

Dashboard instruments

For other faults, such as with the tyre under-

Engine pre-heating (Diesel)

Engine self-diagnostic system

inflation detection system, carry out (3).

Temporarily on

Flashing.

Fixed, accompanied by the display of a

(up to approximately 30 seconds in

The engine management system has a

message.

severe weather conditions).

fault.

One or more major faults, for which there is/are

When switching on the ignition, if the weather

There is a risk that the catalytic converter will be

no specific warning lamp(s), have been detected.

conditions and the engine temperature make it

destroyed.

Identify the cause of the fault using the message

necessary.

You must carry out (2).

displayed on the instrument panel, then carry

Wait until the warning lamp goes off before

Fixed.

out (3).

starting.

The emissions control system has a fault.

Fixed, accompanied by the display of the

When the warning lamp goes off, starting will

The warning lamp should go off when the engine

message "Audible Warning System

occur immediately if you press and hold:

is started.

fault: Repair needed ".

- the clutch pedal with a manual gearbox.

Carry out (3) without delay.

The audible warning system is in failure.

- the brake pedal with an automatic gearbox.

AdBlue^® (BlueHDi)

The following driving aids may be disturbed or

If the engine does not start, make the engine

On for around 30 seconds when starting

unavailable:

starting request again, while keeping your foot

the vehicle, accompanied by a message

- Road signs recognition.

on the pedal.

indicating the driving range.

- Active Safety Brake/Collision Risk Alert.

Low fuel level

The driving range is between 1,500 and 500

- Lane keeping assist.

Fixed, with the reserve level shown in red,

miles (2,400 and 800 km).

- Driver Attention Warning by Camera.

accompanied by an audible signal and

Top up the AdBlue^®.

Carry out (3).

the display of a message.

Fixed, on switching on the ignition,

Fixed, accompanied by the message

When it first comes on, you have approximately

accompanied by an audible signal and a

"Parking brake fault".

6 litres of fuel remaining in the tank (reserve).

message indicating the driving range.

Automatic release of the electric parking brake is

Until the fuel level is topped up, this alert will

The driving range is between 500 and 62 miles

unavailable.

be repeated every time the ignition is switched

(800 and 100 km).

Carry out (2).

on, with increasing frequency as the fuel level

Promptly top up the AdBlue^®, or carry out (3).

Service warning lamp fixed and

decreases and approaches zero.

Flashing, accompanied by an audible

service spanner flashing then

Refuel without delay to avoid running out of fuel.

signal and a message indicating the

fixed.

Never drive until completely empty, as

driving range.

The servicing interval has been exceeded.

this could damage the emissions control and

The driving range is less than 62 miles (100 km).

The vehicle must be serviced as soon as

injection systems.

You must top up the AdBlue^® to avoid engine

possible.

starting being prevented, or carry out (3).

Only with BlueHDi Diesel engines.

Dashboard instruments

Flashing, accompanied by an audible

accompanied by an audible signal and a

If manual application and release commands are

signal and a message indicating that

message indicating that starting is prevented.

not working, the electric parking brake control is

starting is prevented.

The engine immobiliser prevents the engine from

faulty.

The AdBlue^® tank is empty: the legally required

restarting (the permitted driving limit has been

The automatic functions must be used at all

engine immobiliser system prevents the engine

exceeded after confirmation of a malfunction of

times and are automatically reactivated in the

from starting.

the emissions control system).

event of a fault with the control.

To restart the engine, top up the AdBlue^® or carry

To start the engine, carry out (2).

Carry out (2).

out (2).

Fixed, accompanied by the

Automatic functions deactivated (electric

It is essential to add at least 10 litres of AdBlue^®

message "Parking brake

parking brake)

to the tank.

fault".

Fixed.

The electric parking brake is faulty: manual and

SCR emissions control system (BlueHDi)

The "automatic application" (on switching

automatic functions may not be working.

Fixed when the ignition is

off the engine) and "automatic release" (on

When stationary, to immobilise the vehicle:

switched on, accompanied

acceleration) functions are deactivated.

► Pull the electric parking brake control and

by an audible signal and a message.

If automatic application/release is no longer

hold it for approximately 7 to 15 seconds, until

A malfunction of the SCR emissions control

possible:

the indicator lamp lights up on the instrument

system has been detected.

► Start the engine.

panel.

This alert disappears once the exhaust

► Use the control to apply the electric parking

If this procedure does not work, secure the

emissions return to normal levels.

brake.

vehicle:

Flashing AdBlue^® warning

► Take your foot fully off the brake pedal.

► Park on a level surface.

lamp on switching on the

► Hold the control pressed in the release

► With a manual gearbox, engage a gear.

ignition, with the Service and Engine self-

direction for between 10 and 15 seconds.

► With an automatic gearbox, select P, then

diagnostics warning lamps on fixed,

► Release the control.

place the supplied chocks against one of the

accompanied by an audible signal and a

► Depress and hold the brake pedal.

wheels.

message indicating the driving range.

► Pull the control in the application direction for

Then carry out (2).

Depending on the message displayed, it is

2 seconds.

possible to drive for up to 685 miles (1,100 km)

► Release the control and the brake pedal.

Braking

before the engine immobiliser is triggered.

Malfunction (with electric parking brake)

Fixed.

Carry out (3) without delay, to avoid starting

Fixed, accompanied by the

A minor fault with the braking system has

being prevented.

message "Parking brake fault".

been detected.

Flashing AdBlue^® warning

The vehicle cannot be immobilised with the

Drive carefully.

lamp on switching on the

engine running.

Carry out (3).

ignition, with the Service and Engine self-

diagnostics warning lamps on fixed,

Dashboard instruments

Pedestrian horn (Hybrid or Rechargeable

Fixed.

Emergency brake malfunction (with

hybrid)

The system is deactivated

electric parking brake)

Fixed.

temporarily because the driver and/or front

Fixed, accompanied by the

Horn fault detected.

passenger (depending on version) has been

message "Parking brake fault".

Carry out (3).

detected as present but the corresponding seat

Emergency braking does not deliver optimal

belt has not been fastened.

performance.

Collision Risk Alert/Active Safety Brake

If automatic release is not available, use manual

Flashing.

Anti-lock braking system (ABS)

release or carry out (3).

The system activates and brakes the

Fixed.

vehicle momentarily to reduce the speed of

The anti-lock braking system has a fault.

Hill start assist

collision with the vehicle in front.

The vehicle retains conventional braking.

Fixed, accompanied by the

For more information, refer to the Driving

Drive carefully at moderate speed, then carry

message "Anti roll-back system

section.

out (3).

fault".

Fixed, accompanied by the display of a

Dynamic stability control (DSC)/Anti-slip

The system has a fault.

message.

regulation (ASR)

Carry out (3).

The system has been deactivated via the touch

Fixed.

Road signs recognition

screen.

The system is deactivated.

Fixed, accompanied by the display of a

Fixed, accompanied by a message and

The DSC/ASR system is reactivated

message and an audible signal.

an audible signal.

automatically when the vehicle is restarted,

The system has a fault.

and at speeds above approximately 31 mph

Carry out (3).

(50 km/h).

Fixed, accompanied by the display of the

At speeds below 31 mph (50 km/h), it can be

message "Driving Assistance Sensor

reactivated manually.

blind: Clean sensor, see User Manual ".

Flashing.

The sensor is masked.

DSC/ASR regulation is activated in the

Stop as soon as it is safe to do so and switch off

event of a loss of grip or trajectory.

the ignition.

Fixed.

Clean the front camera.

The DSC/ASR system has a fault.

Lane keeping assist

Fixed.

Carry out (3).

Flashing.

The system has a fault.

You are about to cross a broken

If these warning lamps come on after the engine

lane marking without operating the direction

is switched off and then restarted, carry out (3).

indicators.

Dashboard instruments

The system is activated, then corrects the

Fixed, accompanied by the display of a

Under-inflation

trajectory if it detects a risk of unintentionally

message and an audible signal.

Fixed.

crossing a line or hard shoulder (depending on

The system has a fault.

The pressure in one or more tyres is too

version).

Carry out (3).

low.

For more information, refer to the Driving

Fixed, accompanied by the display of the

Check the pressure of the tyres as soon as

section.

message "Driving Assistance Sensor

possible.

Fixed.

blind: Clean sensor, see User Manual ".

Reinitialise the detection system after adjusting

The system has been automatically

The sensor is masked.

the pressure.

deactivated or placed on standby.

Stop as soon as it is safe to do so and switch off

Under-inflation warning lamp

Fixed, accompanied by the display of the

the ignition.

flashing then fixed and Service

message "Driving Assistance Sensor

Clean the front camera.

warning lamp fixed.

blind: Clean sensor, see User Manual ".

The tyre pressure monitoring system is faulty.

Airbags

The sensor is masked.

Under-inflation detection is no longer monitored.

Fixed.

Stop as soon as it is safe to do so and switch off

Check the tyre pressures as soon as possible

One of the airbags or seat belt

the ignition.

and carry out (3).

pyrotechnic pretensioners is faulty.

Clean the front camera.

Carry out (3).

Parking sensors

Fixed, accompanied by the display

Front passenger airbag (ON)

Flashing.

of a message and an audible

Fixed.

The system detects an obstacle.

signal.

The front passenger airbag is activated.

Fixed, accompanied by the display of a

The system has a fault.

The control is set to the "ON" position.

message and an audible signal.

Carry out (3).

In this case, do not install a "rearward facing"

The system has a fault.

Lane positioning assist

child seat on the front passenger seat - risk

Carry out (3).

Fixed, accompanied by the

of serious injury!

Fixed, accompanied by the display of the

Service warning lamp.

message "Parking Assistance Sensor

Front passenger airbag (OFF)

The system has a fault.

blind: Clean sensor, see User Manual ".

Fixed.

Carry out (3).

The sensor is masked.

The front passenger airbag is deactivated.

Driver Attention Warning by Camera

Stop as soon as it is safe to do so and switch off

The control is set to the “OFF” position.

(Distraction detection)

the ignition.

A "rearward facing" child seat can be installed,

Fixed.

Clean the front and/or rear sensors.

unless there is a fault with the airbags (Airbags

The system is deactivated.

warning lamp on).

Dashboard instruments

Stop & Start (Petrol or Diesel)

Rear foglamps

The indicator lamp goes out upon reaching a

Fixed, accompanied by the display of a

Fixed.

speed of approximately 3 mph (5 km/h) and

message.

The lamps are on.

lights up again when the vehicle stops moving.

The Stop & Start system has been deactivated

The lamp will go out when you turn off the

Green warning/indicator lamps

manually.

engine and exit the vehicle.

The engine will not switch off at the next traffic

Blind spot monitoring

Lane positioning assist

stop.

Fixed.

Reactivate the system via the touch screen.

The function has been activated.

Fixed.

Hill Assist Descent Control

All conditions have been met: the system is

The Stop & Start system has been

Fixed.

operating.

deactivated automatically.

The function has been activated, but the

For more information, refer to the Driving

The engine will not switch off at the next traffic

conditions for regulation are not met (gradient,

section.

stop, if the exterior temperature is:

gear engaged).

Automatic wiping

- below 0°C.

Flashing.

Fixed.

- above +35°C.

The function is regulating the speed of

Automatic windscreen wiping is activated.

For more information, refer to the Driving

the vehicle.

section.

The vehicle is being braked; the brake lamps

Direction indicators

Flashing then fixed, accompanied by a

come on during the descent.

Flashing with audible signal.

message.

The direction indicators are on.

Stop & Start

The system has a fault.

Sidelamps

Fixed.

Carry out (3).

Fixed.

When the vehicle stops, the Stop & Start

The lamps are on.

e-Auto mode (Hybrid)

puts the engine into STOP mode.

Fixed, accompanied by the display of a

Flashing temporarily.

Dipped beam headlamps

message.

STOP mode is momentarily unavailable

Fixed.

The e-Auto mode has been deactivated

or START mode is automatically triggered.

The lamps are on.

manually.

For more information, refer to the Driving

Automatic headlamp dipping

The petrol engine will not switch off at the next

section.

Fixed.

release of the accelerator pedal or at the next

Vehicle ready to drive (Rechargeable

The function has been activated

traffic stop.

hybrid)

via the touch screen (Driving/Vehicle menu).

Reactivate the mode via the touch screen.

Fixed, accompanied by an audible signal

The lighting control stalk is in the "AUTO"

when it comes on.

position.

The vehicle is ready to drive.

Dashboard instruments

For more information, refer to the Lighting and

- The distance recorder display line indicates

Resetting the service indicator

visibility section.

the distance remaining before the next service

The service indicator must be reset after each

Blue warning/indicator lamps

is due, or the distance travelled since it was due

service.

preceded by the "-" sign.

If you have serviced your vehicle yourself:

Main beam headlamps

- An alert message indicates the distance

► Switch off the ignition.

Fixed.

remaining, as well as the period before the next

The lamps are on.

service is due or how long it is overdue.

Black/white warning lamps

The value indicated is calculated

Foot on the brake

according to the distance covered and

Fixed.

the time elapsed since the last service.

Insufficient or no pressure on the brake

The alert may also be triggered close to a

pedal.

due date.

With an automatic gearbox, with the engine

running, before releasing the parking brake, to

Service spanner

► Press and hold the button located on the end

move out of position P.

On temporarily when the ignition is

of the wiper control stalk.

switched on.

eSave function (Rechargeable hybrid)

► Switch on the ignition; a temporary display

Between 620 and 1,860 miles (1,000 and 3,000

Fixed, accompanied by the reserved

window appears and a countdown begins.

km) remain before the next service is due.

electric range.

► When the display indicates =0, release the

Fixed, when the ignition is switched on.

The eSave function is activated.

button; the spanner disappears.

The next service is due in less than 620

miles (1,000 km).

If you have to disconnect the battery

Indicators

Have your vehicle serviced very soon.

following this operation, lock the vehicle

Service spanner flashing

and wait at least 5 minutes for the reset to be

Service indicator

Flashing then fixed, when the

registered.

The servicing information is expressed in terms

ignition is switched on.

of distance (miles or kilometres) and time

(With BlueHDi Diesel engines, associated with

Reminder of the servicing information

(months or days).

the Service warning lamp.)

You can access the servicing information at any

The alert is given at whichever of these two

The servicing interval has been exceeded.

time.

terms is reached first.

Have your vehicle serviced as soon as possible.

The servicing information is displayed in the

instrument panel. Depending on the version of

► Press the trip distance recorder reset button.

the vehicle:

Dashboard instruments

The servicing information is displayed for a few

In the event of a malfunction of the

Wait a few minutes before switching off the

seconds, then disappears.

electric gauge, the oil level is no longer

engine.

monitored.

After switching off the ignition, carefully

Engine oil level indicator

If the system is faulty, you must check the

open the bonnet and check the coolant

(Depending on version)

engine oil level using the manual dipstick

level.

On versions fitted with an electric gauge, the

located in the engine compartment.

engine oil level status is displayed on the

For more information on Checking levels,

For more information on Checking

instrument panel for a few seconds when

refer to the corresponding section.

levels, refer to the corresponding

the ignition is switched on, after the servicing

section.

information, in the form of messages.

Coolant temperature

The level read will only be correct if the

indicator

AdBlue^® range indicators

vehicle is on level ground and the engine

has been off for more than 30 minutes.

(BlueHDi)

The Diesel BlueHDi engines are equipped with

Low oil level

a system that associates the SCR (Selective

This is indicated by the message "Oil

Catalytic Reduction) emissions control system

level incorrect" on the instrument panel,

and the Diesel particle filter (DPF) for the

accompanied by the lighting of the Service

treatment of exhaust gases. They cannot

warning lamp and an audible signal.

function without AdBlue^® fluid.

If a low oil level is confirmed by a check using

When the level of AdBlue^® falls below the

the dipstick, the level must be topped up to avoid

reserve level (between 1,500 and 0 miles (2,400

damage to the engine.

and 0 km)), a warning lamp lights up when

For more information on Checking levels, refer

the ignition is switched on and an estimate

With the engine running:

to the corresponding section.

of the distance that can be travelled before

- In zone A, the temperature is correct.

Oil gauge malfunction

engine starting is prevented is displayed in the

- In zone B, the temperature is too high.

instrument panel.

This is indicated by the message "Oil level

The associated warning lamp and the

measurement invalid" on the instrument panel.

STOP warning lamp light up in red on the

The engine starting prevention system

Consult a PEUGEOT dealer or a qualified

instrument panel, accompanied by the display of

required by regulations is activated

workshop.

a message and an audible signal.

automatically once the AdBlue^® tank is empty.

You must stop the vehicle as soon as it is

It is then no longer possible to start the

safe to do so.

Dashboard instruments

engine until the minimum level of AdBlue^® has

minutes of driving before the top-up detection

Warning/

Action

Remaining

been topped up.

is effective.

indicator

range

lamps on

Manual display of driving range

Malfunction of the SCR emissions

Top up.

Between

While the driving range is greater than

control system

1,500 miles

1,500 miles (2,400 km), it is not displayed

and 500

Malfunction detection

automatically.

miles (2,400

km and 800

If a malfunction is detected,

km)

these warning lamps come

► Press this button to temporarily display the

on, accompanied by an

Top up as

Between

driving range.

audible signal and the

soon as

500 miles

display of an "Emissions

possible.

and 62

Actions required related to a lack of

control fault" message.

miles (800

AdBlue^®

km and

The alert is triggered while driving when the

The following warning lamps light up when the

100 km)

fault is detected for the first time, and thereafter

quantity of AdBlue^® is below the reserve level:

A top-up is

Between 62

when switching on the ignition for subsequent

driving range of 1,500 miles (2,400 km).

vital, there is

miles and 0

journeys, for as long as the cause of the fault

Together with the warning lamps, messages

a risk that the

miles (100

persists.

regularly remind you of the need to top up to

avoid engine starting being prevented. Refer to

engine will

km and 0

If the fault is temporary, the alert

the Warning and indicator lamps section for

be prevented

km)

disappears during the next journey, after

details of the messages displayed.

from starting.

self-diagnostic checks of the SCR emissions

To be able

0 miles (km)

control system.

For more information on AdBlue^®

to restart the

(BlueHDi) and in particular on topping

engine, add at

Malfunction confirmed during the

up, refer to the corresponding section.

least 10 litres

permitted driving phase (between 685

of AdBlue^® to

miles and 0 miles (1,100 km and 0 km))

the tank.

If the fault indication is still displayed

permanently after 31 miles (50 km) of driving, the

Taking into account of top-up

fault in the SCR system is confirmed.

Top-up detection may not be

instantaneous after addition. It may take a few

Dashboard instruments

The AdBlue warning lamp flashes and

When the ignition is switched on and

a message is displayed ("Emissions

before the engine is started, the power

control fault: starting prevented in X miles

indicator only displays "OFF".

(kms)"), indicating the driving range in miles or

kilometres.

With rechargeable hybrid engine

While driving, the message is displayed every 30

POWER High power demand, using the

seconds. The alert is repeated when switching

combined capabilities of the petrol

on the ignition.

engine and the electric motor(s)

You can continue driving for up to 685 miles

(depending on version).

(1,100 km) before the engine starting

The slider is located in this zone

prevention system is triggered.

during more dynamic driving phases

With hybrid engine

Have it checked by a PEUGEOT dealer

when high levels of performance are

POWER High power demand, using the

being demanded.

or a qualified workshop.

combined capabilities of the petrol

ECO

Optimal use of energy (internal

engine and the electric motor.

combustion or electric).

Starting prevented

The slider is located in this zone

Every time the ignition is switched on, the

during more dynamic driving phases

when driving under electric power and

message "Emissions control fault: Starting

when high levels of performance are

when optimal use is being made of

prevented" is displayed.

being demanded.

the petrol engine, both accessible by

To restart the engine

ECO

Optimal use of energy (internal

adopting a suitable driving style.

Contact a PEUGEOT dealer or a

combustion or electric).

A symbol indicates the threshold at

qualified workshop.

The slider is located in this zone

which the petrol engine will restart.

when driving under electric power and

The driver can therefore moderate

when optimal use is being made of

their acceleration to remain in electric

Power indicator (Hybrid or

the petrol engine, both accessible by

driving mode.

Rechargeable hybrid)

adopting a suitable driving style.

CHARGE Energy recovery for partly

CHARGE Energy recovery for recharging the

recharging the traction battery.

The power indicator shows in real time the power

traction battery.

The slider is located in this zone

demanded from the vehicle.

The slider is located in this zone

during deceleration: taking your foot

There are 3 zones:

during deceleration: taking your foot

off the accelerator pedal or braking.

Dashboard instruments

Charge level indicator

The following information is displayed on the

Total distance recorder

instrument panel:

This recorder measures the total distance

(Rechargeable hybrid)

- Engine oil level.

travelled by the vehicle since its initial

- Next service due.

registration.

- Driving range associated with the AdBlue^® and

the SCR system (BlueHDi Diesel).

Trip distance recorder

- Current alerts.

This measures the distance travelled since it was

This information is also displayed

last reset by the driver.

automatically every time the ignition is

switched on.

The charge level of the traction battery and

the remaining range in electric driving mode

Distance recorders

are permanently displayed when the vehicle is

With the ignition on, the distances are

switched on.

permanently indicated. They are deactivated

about 30 seconds after switching the ignition

The range displayed depends on the use

off. They are displayed when the driver's door

of the vehicle (type of driving and speed),

is opened, and when the vehicle is locked or

the outside temperature and the activated

unlocked.

Resetting the trip recorder

comfort equipment.

► With the ignition on, press the button until

When travelling abroad, you may have to

zeros appear.

change the distance units (km or miles):

Manual test on the

the road speed must be displayed in the local

country’s official unit (km/h or mph).

Instrument panel lighting

instrument panel

The unit is changed via the screen

dimmer

This function allows you, at any time, to check

configuration menu, with the vehicle

certain indicators and to display the alerts log.

stationary.

Allows the instrument panel lighting to be

switched on or off.

► Press this button.

► With the engine running, briefly press this

The brightness of the instrument panel lighting is

button.

adjusted using the touch screen.

Dashboard instruments

With PEUGEOT Connect Radio

► Press this button to select the

► Pressing the button located on the end of the

► Press this button to select the

Settings menu.

wiper control stalk displays the following tabs in

Settings menu.

► Select "Turn off screen".

turn:

► Select "Brightness".

- Current information:

The screen goes off completely.

• Total driving range (Petrol or Diesel).

► Adjust the brightness by pressing the

► Press the screen again (anywhere on its

• Current consumption (Petrol, Diesel or

arrows or moving the slider.

surface) to turn it on.

Hybrid).

The settings are applied immediately.

• Time counter for Stop & Start (Petrol or

► Press outside the settings window to exit.

Diesel).

Trip computer

You can also switch off the screen:

• Percentage of the current journey travelled

Displays information related to the current trip

in all-electric driving mode (Hybrid or

► Press this button to select the

(range, fuel consumption, average speed, etc.).

Rechargeable hybrid).

Settings menu.

► Select "Dark".

- Trips "1" then "2":

Data displayed on the

• Average speed.

• Average consumption.

The screen goes off completely.

instrument panel

► Press the screen again (anywhere on its

• Distance travelled.

Trip computer data is permanently displayed

surface) to turn it on.

when the "Computer" or "Personal" display

End of trip page

mode is selected (depending on version).

(Depending on version)

With PEUGEOT Connect Nav

In all other display modes, pressing the end of

When the ignition is switched off, the instrument

With the lamps switched on:

the wiper control stalk will cause this data to

panel automatically displays an additional page

► Press this button to select the

appear temporarily in a specific window.

of the trip computer that recapitulates information

Settings menu.

Displaying the different tabs

about the last trip.

► Select "OPTIONS".

The end of trip page contains the following

► Select "Screen configuration".

information:

- Range.

► Select the "Brightness” tab.

- Trip time.

► Adjust the instrument panel and

- Distance travelled.

screen brightness by using the arrows or

- Percentage of the current journey travelled in

moving the slider.

all-electric driving mode (Hybrid or Rechargeable

► Press this button to save and exit.

hybrid).

- Average consumption.

You can also switch off the screen:

Dashboard instruments

Trip reset

This function is only displayed at speeds above

– Permanent display of the time and outside

19 mph (30 km/h).

temperature (a blue warning lamp appears if

► When the desired trip is displayed,

there is a risk of ice).

press the button on the end of the wiper

Average consumption

- Heating/air conditioning system controls.

control stalk for more than 2 seconds.

(mpg or l/100 km or km/l)

- Vehicle functions and equipment setting

Trips "1" and "2" are independent and are used

Calculated since the last trip computer

menus.

in the same way.

reset.

- Audio system and telephone controls and

display of related information.

Definitions

Average speed

- Display of visual manoeuvring aid functions

(mph or km/h)

(visual parking sensor information, Park Assist,

Range

Calculated since the last trip computer

etc.).

(miles or km)

reset.

- Internet services and display of related

Distance that can still be travelled with the

information.

fuel remaining in the tank (based on the

Distance travelled

- Navigation system controls and

average fuel consumption over the last few miles

(miles or km)

display of related information (depending on

(kilometres) travelled).

Calculated since the last trip computer

version).

This value may vary following a change in driving

reset.

style or terrain, leading to a significant change in

For safety reasons, always stop the

current fuel consumption.

vehicle before performing operations

Stop & Start time counter

When the range falls below 19 miles (30 km),

that require sustained attention.

(minutes/seconds or hours/minutes)

dashes are displayed.

Some functions are not accessible while

After filling with at least 5 litres of fuel, the range

driving.

If your vehicle is fitted with the Stop & Start

is recalculated and is displayed if it exceeds 62

function, a time counter calculates the time spent

miles (100 km).

in STOP mode during a journey.

Recommendations

Dashes appearing permanently in place of

The time counter is reset each time the ignition is

numbers while driving indicates a malfunction.

This screen is of the capacitive type.

switched on.

Consult a PEUGEOT dealer or a qualified

- Do not use pointed objects on the touch

workshop.

screen.

Touch screen

- Do not touch the touch screen with wet hands.

Current consumption

- Use a soft, clean cloth to clean the touch

This system gives access to the following

(mpg or l/100 km or km/l)

screen.

elements:

Calculated during the last few seconds.

Dashboard instruments

Principles

- Reminder of information from the

For more information on Dual-zone automatic

RadioMedia and Telephone menus and

air conditioning, refer to the corresponding

► Use the buttons arranged below the touch

navigation instructions (depending on

section.

screen to access the menus, then press the

equipment).

Navigation (Depending on equipment)

buttons that appear on the touch screen.

- Notifications.

Some menus may display across two pages:

- Access to the Settings for the touch screen

Driving or Vehicle (Depending on

press the "OPTIONS" button to access the

and the digital instrument panel (date/time,

equipment)

second page.

languages, units, etc.).

Activation, deactivation and settings for certain

After a few moments with no action on

functions.

the second page, the first page is

Menus

The functions are organised in 2 tabs: "Driving

displayed automatically.

functions" and "Vehicle settings".

Telephone

To deactivate/activate a function, select "OFF"

or "ON".

Applications

Configuring a function

Access to certain configurable equipment.

Energy

Access to additional information on the

Access to the rechargeable hybrid system

function

features (energy flow, consumption statistics,

Confirm

deferred charging, eSave function).

Return to the previous page or confirm

Energy menu

Volume adjustment/mute.

Flow

Press the touch screen with three fingers

to show all of the menu buttons.

The page shows the operation of the

rechargeable hybrid system in real time.

Upper bar

For more information about the menus,

Certain information is displayed permanently in

refer to the sections describing the audio

the upper bar of the touch screen:

and telematics systems.

- Time and outside temperature (a blue warning

lamp appears if there is a risk of ice).

Radio/Media

- Reminder of the air conditioning information,

and direct access to the corresponding menu.

Climate

Settings for temperature, air flow, etc.

Dashboard instruments

► You can change the displayed time scale by

threshold. This leads to excessive fuel

1. Active driving mode

pressing the - or + buttons.

consumption.

2. Petrol engine

3. Electric motor(s)

A current trip is any trip of more than 20

4. Traction battery charge level

minutes without switching off the ignition.

Remotely operable

The energy flows have a colour for each type of

driving:

Charging

additional functions

- Blue: 100% electrical energy.

This page allows you to programme deferred

(Rechargeable hybrid)

- Orange: energy from the petrol engine.

charging.

- Green: energy recovery.

(Depending on country of sale)

For more information on Charging the traction

Statistics

battery (Rechargeable hybrid), refer to the

corresponding section.

This page shows electrical energy and fuel

The following functions are

consumption statistics.

eSave

available from the MYPEUGEOT

APP application, which is

The eSave function makes it possible to reserve

accessible from a smartphone:

all or part of the electrical energy in the traction

battery for later use during a journey (e.g. driving

- Managing the traction battery charging

in an urban area or in an area reserved for

(deferred charging).

electric vehicles).

- Managing the temperature pre-conditioning.

► Select the electric range to be reserved (10

- Viewing the state of charge and range of the

km, 20 km or the full range MAX) then activate

vehicle.

the function by pressing ON.

1. Average electrical consumption for the current

Installation procedure

Activation of the function is confirmed by

trip (kWh/100 km) and historical values:

► Download the MYPEUGEOT APP application

the lighting of this indicator lamp on the

- Blue bar chart: directly consumed energy

from the appropriate online store for your

instrument panel and the indication of the energy

supplied by the traction battery.

smartphone.

reserve in miles or kms.

- Green bar chart: energy recovered during

► Create an account.

► To use the energy reserve, choose the

deceleration and braking, used to recharge the

► Enter the vehicle identification number

Electric driving mode in the mode selector.

battery.

(available on the vehicle registration certificate).

2. Average fuel consumption for the current trip

If the requested range exceeds the

For more information on Identification

(kWh/100 km) and historical values (orange bar

available range (not recommended), the

markings, refer to the corresponding section.

chart).

internal combustion engine starts to recharge

the traction battery up to the requested

Access

Electronic key with

etc. For more information on the Back-up

Unlocking the vehicle

procedures, refer to the corresponding section.

remote control function

Built-in key

and built-in key

Selective unlocking (driver’s door, boot) is

The key built into the remote control can be

configured in the Driving/Vehicle touch

used for the following operations, depending on

Remote control function

screen menu.

version:

- Unlocking/Locking/Deadlocking the vehicle.

Complete unlocking

- Activation/Deactivation of the manual child

► Press the unlocking button.

lock.

- Activation/Deactivation of the front passenger

Selective unlocking

airbag.

Driver's door

- Back-up Unlocking/Locking of the doors.

► Press the unlocking button.

The driver's door and the fuel filler flap are

unlocked (Petrol, Diesel or Hybrid).

The driver's door is unlocked (Rechargeable

hybrid).

► Press it again to unlock the other doors and

The remote control can be used to perform

the boot.

the following remote functions (depending on

The charging nozzle can be unplugged on the

version):

second press.

- Unlocking/Locking/Deadlocking the vehicle.

Complete or selective unlocking, and alarm

- Unlocking - Opening the boot.

deactivation (depending on version), is confirmed

- Remote operation of lighting.

by the flashing of the direction indicators.

- Folding/Unfolding the door mirrors.

► To eject the key or put it back in place, pull

Depending on version, the door mirrors unfold.

- Activating/Deactivating the alarm.

and hold the button.

- Locating the vehicle.

Selective unlocking and opening of

- Closing the windows.

Once the built-in key is ejected, always

the tailgate

- Closing the sunroof.

keep it with you to be able to carry out

the corresponding back-up procedures.

By default, selective unlocking of the tailgate

- Activating the vehicle’s electronic immobiliser.

is deactivated and its motorised operation is

Back-up procedures allow the vehicle to be

activated.

locked/unlocked in the event of a failure of the

remote control, the central locking, the battery,

Access

► With a motorised tailgate: press and

An access (door or boot) that is not

For more information on the Alarm, refer to

hold this button to unlock the boot and

properly closed prevents locking of the

the corresponding section.

trigger the motorised opening of the tailgate.

vehicle. However, if the vehicle is fitted with

► With a non-motorised tailgate: press and hold

an alarm, it will be activated after 45 seconds.

Locating the vehicle

this button to unlock the boot and partially open

If the vehicle is unlocked but the doors or boot

the tailgate.

are not subsequently opened, the vehicle

This function helps you to spot your vehicle from

When selective unlocking of the tailgate is

will automatically lock itself again after about

a distance, with the vehicle locked:

activated, the doors and the fuel filler flap remain

30 seconds. If the vehicle is fitted with an

- The direction indicators flash for approximately

locked.

alarm, it will be reactivated automatically.

10 seconds.

After a selective unlocking of the tailgate, if the

- The door mirror spotlamps come on.

vehicle has not been fully unlocked, the tailgate

- The courtesy lamps come on.

Deadlocking

will automatically relock after closing.

► Make a long press on this button.

If selective unlocking of the tailgate is

Deadlocking renders the interior door

deactivated, pressing the button unlocks the

controls inoperative. It also disables the

Remote lighting of the

whole vehicle.

central locking button.

The horn remains operational.

lamps

If motorised operation of the tailgate is

Never leave anyone inside the vehicle

Availability of this function depends on version.

deactivated, pressing the button partially

when it is deadlocked.

► Press this button. The sidelamps,

opens the tailgate.

To lock the vehicle, it is necessary to close

dipped beam headlamps, number plate

► Press the locking button.

the tailgate again.

lamps and door mirror spotlamps come on for 30

► Press the locking button again within 5

seconds.

seconds to deadlock the vehicle (confirmed by

Pressing again before the end of the timed

Locking the vehicle

the temporary lighting of the direction indicators).

period switches off the lamps immediately.

Closing the windows

Holding the locking button pressed for

Advice

more than 3 seconds closes the windows.

Remote control

Normal locking

When closing windows, ensure that no

The remote control is a sensitive, high-

► Press the locking button.

person or object could prevent their

frequency device; avoid handling it in your

The locking, and the activation of the alarm

correct closure.

pocket, due to the risk of unintentionally

depending on version, is confirmed by the

To leave the windows partly open on versions

unlocking the vehicle.

lighting of the direction indicators.

with alarm, you must first deactivate the

Avoid pressing the remote control buttons

Depending on version, the door mirrors fold.

interior volumetric alarm.

while out of range of the vehicle, due to

Access

the risk of rendering the remote control

Complete unlocking

Keyless Entry and Start

inoperative. It would then be necessary to

► Pass your hand behind the handle of one

reset it.

of the front doors or press the tailgate opening

control.

Anti-theft protection

If the motorised tailgate opening control is

Do not modify the electronic vehicle

activated, this action triggers its automatic

immobiliser, as this might result in

opening.

malfunctions.

Opening the windows

Remember to turn the steering wheel to

Depending on version, keeping your hand

engage the steering lock.

behind the door handle or maintaining the

press on the tailgate opening control allows the

Locking the vehicle

windows to be opened to the desired position.

Driving with the doors locked could make

This system allows the unlocking, locking

Selective unlocking

it more difficult for the emergency services

and starting of the vehicle, while carrying the

Driver's door

to enter the passenger compartment in an

electronic key on your person in the recognition

► Pass your hand behind the driver’s door

emergency.

zone A.

handle.

As a safety precaution, take the electronic key

with you when leaving the vehicle, even for a

The driver's door and the fuel filler flap are

Unlocking the vehicle

unlocked (Petrol, Diesel or Hybrid).

short time.

The driver's door is unlocked (Rechargeable

hybrid).

Purchasing a second-hand vehicle

► To unlock the vehicle completely, pass your

Have the key codes memorised by a

hand behind the front passenger door handle

PEUGEOT dealer, to ensure that the keys

with the electronic key close to the passenger

in your possession are the only ones able to

door.

start the vehicle.

Complete or selective unlocking, and

deactivation of the alarm depending on version,

is confirmed by the flashing of the direction

Selective unlocking (driver’s door, boot) is

indicators.

configured in the Driving/Vehicle touch

Depending on version, the door mirrors unfold.

screen menu.

Selective unlocking is deactivated by default.

Access

Selective unlocking of the tailgate

Make sure that no item or person could

► Press it again within 5 seconds to deadlock

► Press the tailgate opening control to unlock

prevent the correct closing of the

the vehicle (confirmed by the temporary lighting

just the boot.

windows and sunroof.

of the direction indicators).

The doors remain locked.

Pay particular attention to children when

operating windows.

Advice

If selective unlocking of the tailgate is

deactivated, pressing this control also

The locking, and the activation of the alarm

If one of the doors or the boot is still open

unlocks the doors.

depending on version, is confirmed by the

or if the electronic key for the Keyless

temporary lighting of the direction indicators.

Entry and Start system has been left inside

Depending on version, the door mirrors fold.

the vehicle, central locking will not take place.

Locking the vehicle

However, if the vehicle is fitted with an alarm,

Deadlocking

it will be activated after 45 seconds.

Normal locking

Deadlocking renders the interior door

If the vehicle is unlocked but the doors or

controls inoperative. It also disables the

boot are not subsequently opened, the

central locking button.

vehicle will automatically lock itself again after

The horn remains operational.

about 30 seconds. If the vehicle is fitted with

Never leave anyone inside the vehicle when it

an alarm, it will be reactivated automatically.

is deadlocked.

Depending on version, the automatic

door mirror folding/unfolding function is

configured via the touch screen's

► Press the handle on one of the front doors

Driving/Vehicle menu.

(at the markings) or the locking control on the

Otherwise, this setting can be carried out at a

tailgate.

PEUGEOT dealer or a qualified workshop.

It is not possible to lock the vehicle if one of the

electronic keys is left inside the vehicle.

As a safety measure, never leave the

Closing the windows and sunroof

vehicle, even for a short time, without

Maintaining pressure on the door handle or

► Press the handle on one of the front doors

taking the Keyless Entry and Start system’s

the tailgate control allows the windows and,

(at the markings) or the locking control on the

electronic key with you.

depending on version, the sunroof to be closed

tailgate to lock the vehicle.

Be aware of the risk of theft of the vehicle if

to the desired position.

the key is present in one of the defined areas

This operation also closes the sunroof blind.

while the vehicle is unlocked.

Access

To preserve the battery charge in the

Manual

Transporting long or voluminous

electronic key and the vehicle's battery,

objects

► Press this button to lock/unlock the vehicle

the "hands-free" functions are set to

Press the central locking control to drive

(doors and boot) from inside the vehicle.

hibernation mode after 21 days without use.

with the boot open and the doors locked.

The indicator lamp comes on to confirm the

To restore these functions, press one of the

Otherwise, every time the speed of the

central locking of the vehicle.

remote control buttons or start the engine with

vehicle exceeds 6 mph (10 km/h), the sound

the electronic key against the back-up reader.

Central locking does not take place if any

of the locks rebounding will be heard and an

For more information on starting with the

of the doors are open.

alert will be displayed.

Keyless Entry and Start system, refer to the

corresponding section.

When locking/deadlocking from the

outside

Back-up procedures

Electrical interference

When the vehicle is locked or deadlocked

The electronic key may not work if it is

from the outside, the indicator lamp flashes

Lost keys, remote control,

close to an electronic device (e.g. mobile

and the button is deactivated.

telephone (switched on or on standby), laptop

► After normal locking, pull one of the

electronic key

computer, strong magnetic fields). If this

interior door controls to unlock the vehicle.

Go to a PEUGEOT dealer with the vehicle's

occurs, move the electronic key away from

► After deadlocking, you must use the

registration certificate, your personal

the electronic device.

remote control, the "Keyless Entry and

identification documents and if possible, the label

Start" system or the built-in key to unlock the

bearing the key code.

vehicle.

The PEUGEOT dealer will be able to retrieve the

key code and the transponder code, enabling a

Central locking

new key to be ordered.

Automatic (anti-intrusion

security)

Complete unlocking/locking

The doors and boot lock automatically while

of the vehicle with the key

driving (speed above 6 mph (10 km/h)).

Use this procedure in the following situations:

To deactivate/reactivate this function (activated

- Remote control battery discharged.

by default):

- Remote control malfunction.

► Press the button until an audible signal is

- Vehicle battery discharged.

triggered and a confirmation message appears.

- Vehicle in an area subject to strong

electromagnetic interference.

Access

In the first case, change the remote control

Front left-hand door

► Close the doors and check from the outside

battery.

► Insert the key into the lock and turn it towards

that the vehicle is locked.

In the second case, reinitialise the remote

the rear of the vehicle to lock the door, or

control.

Changing the battery

towards the front to unlock it.

Refer to the corresponding sections.

A message is displayed on the instrument panel

Other doors

when the battery needs changing.

Unlocking

Battery type: CR2032/3 volts.

► Pull the interior door opening control.

Locking

► Insert the key in the door lock.

► Turn the key towards the front/rear to unlock/

lock the vehicle.

► Turn the key towards the rear again within

5 seconds to deadlock the vehicle.

If the vehicle is fitted with an alarm, it will

not be activated when locking with the

key.

If the alarm is activated, the siren sounds

► Unclip the cover by inserting a small

when the door is opened; switch on the

screwdriver in the slot and lift the cover.

ignition to stop it.

► Remove the flat battery from its housing.

► Open the doors.

► Put the new battery in place, respecting the

Central locking not

polarity. Start by inserting it into the contacts

► For the rear doors, check that the child lock

functioning

is not on.

located in the corner, then clip the cover onto

Refer to the corresponding section.

the unit.

Use these procedures in the following cases:

► Remove the black cap, located on the edge

► Reinitialise the remote control.

- Central locking malfunction.

of the door, using the key.

For more information on Reinitialising the

- Battery disconnected or discharged.

► Insert the key into the socket without forcing

remote control, refer to the corresponding

In the event of a malfunction of the

it, then turn the latch towards the inside of the

section.

central locking system, the battery must

door.

Do not throw remote control batteries

be disconnected to ensure that the vehicle is

► Remove the key and refit the black cap.

away, as they contain metals that are

locked fully.

Access

harmful to the environment. Take them to an

Reinitialising the remote

Doors

approved disposal point.

control

Following replacement of the battery or in

Opening

This equipment contains a button type

the event of a fault, it may be necessary to

battery.

reinitialise the remote control.

From outside

Do not swallow the battery. Risk of chemical

► After unlocking the vehicle or with the

burns!

"Keyless Entry and Start" system electronic key

Swallowing the battery can cause serious

in the recognition zone, pull the door handle.

internal burning in only 2 hours and can be

fatal.

From inside

If batteries have been swallowed or inserted

► Pull the interior opening control of a door; this

into a part of the body, seek immediate

unlocks the vehicle completely.

medical advice.

Keep new and used batteries out of the reach

With selective unlocking activated:

of children.

- Opening the driver's door unlocks

If the battery compartment does not close

the driver's door only (if the vehicle has not

properly, stop using the product and keep it

already been completely unlocked).

out of the reach of children.

- Opening one of the passenger doors

► Insert the mechanical key (incorporated into

unlocks the rest of the vehicle.

the remote control) into the lock to open the

Risk of explosion if the battery is

vehicle.

replaced with an incorrect type!

► Place the electronic key against the back-up

Replace the battery with the same type.

Boot

reader on the steering column and hold it there

until the ignition is switched on.

Risk of explosion or leaking of

► With a manual gearbox, place the gear lever

Opening the tailgate

inflammable liquid or gas!

in neutral then fully depress the clutch pedal.

Do not use in/store in/place in an environment

► With an automatic gearbox, while in mode

where the temperature is extremely high or

P, depress the brake pedal.

where the pressure is extremely low due to

► Switch on the ignition by pressing the

very high altitude.

"START/STOP" button.

Do not try to burn, crush or cut a used battery.

If the fault persists after reinitialisation, contact

a PEUGEOT dealer or a qualified workshop

without delay.

Access

► With the vehicle unlocked or with the

electronic key in the recognition zone, press the

central tailgate control.

► Raise the tailgate.

When selective unlocking is activated,

the electronic key must be close to the

rear of the vehicle.

The tailgate is not designed to hold a

► Insert a small screwdriver into hole A of the

Check that there is enough space to

bicycle carrier.

lock to unlock the boot.

allow for the movement of the motorised

► Move the latch to the left.

tailgate.

Closing the tailgate

Locking after closing

► Lower the tailgate using the interior grips.

If the fault persists after closing again, the boot

► Release the grips and press down on the

will remain locked.

outside of the tailgate to close it.

In the event of a fault with the central

In the event of a malfunction or if you

locking system, it is essential to

experience difficulty opening or closing

disconnect the battery to lock the boot and so

the tailgate, have it checked by a PEUGEOT

ensure complete locking of the vehicle.

dealer or a qualified workshop without delay,

to avoid the issue deteriorating and prevent

any risk of the tailgate dropping, potentially

Hands-free tailgate

causing serious injury.

Never insert a finger in the locking

(Depending on version)

system of the motorised tailgate - risk of

The motorised tailgate must only be operated

serious injury!

Back-up release

with the vehicle stationary.

To manually unlock the boot in the event of a

Anti-pinch

battery or central locking failure.

The motorised tailgate has an obstacle detection

Unlocking

system that automatically interrupts and reverses

► Fold the rear seats to gain access to the lock

its movement by a few degrees, to allow the

from inside the boot.

obstacle to be cleared.

Access

Please note that this anti-pinch system is not

The tailgate opens, either completely by

active at the end of the closing travel (around

default, or to the position memorised

1 cm from completely closed).

beforehand.

If motorised operation is not activated, these

To avoid the risk of injury through

actions release the tailgate (partially-open

pinching or trapping, before and during

position).

operation of the motorised tailgate:

When the vehicle is locked, the request to

- ensure that there is no-one close to the

open the boot with one of the controls A

rear of the vehicle.

or B unlocks the vehicle, or only the boot if

- monitor the activity of the rear passengers,

selective unlocking is activated, prior to the

particularly any children.

opening of the boot.

There are several ways of operating the tailgate:

Bicycle carrier/Towing device

Closing

A. Using the Keyless Entry and Start system’s

The motorised tailgate is not designed to support

► A short press on the interior tailgate control C.

electronic key

a bicycle carrier.

B. Using the exterior tailgate control

It is possible to interrupt the operation of

When installing a bicycle carrier on the towing

C. Using the interior tailgate control

the tailgate at any point.

device with connection of the cable to the trailer

D. Using the control on the dashboard*

Pressing one of these controls again

socket, the motorised operation of the tailgate

interrupts the movement that is underway.

will be automatically deactivated.

Opening

If using a towing device or bicycle carrier

► A long press on the central button A of the

Hands-free function (Hands-Free

not recommended by PEUGEOT, it is

electronic key.

Tailgate Access)

essential to deactivate the motorised

operation of the tailgate.

► A short press on the exterior tailgate control

(Depending on version)

B, with the electronic key on your person.

With the electronic key on your person, this

function allows the motorised tailgate to be

Motorised operation

► Two consecutive presses on the control D of

opened, closed or stopped via a "kicking"

Motorised operation of the tailgate is set

the dashboard.

movement under the rear bumper.

via the Driving/Vehicle touch screen

The "Hands-Free Tailgate/Access"

menu.

function is set via the Driving/Vehicle

touch screen menu.

* Depending on version.

Access

Ensure that you are steady on your feet

The "kicking" movement must be given forwards,

Automatic locking with the hands-free

before performing the "kicking"

smoothly, not too fast and with a vertical

function

movement.

movement from low to high. Raise the foot

Take care not to touch the exhaust system

sufficiently and remove it immediately.

which may be hot - risk of burns!

Recognition of the "kicking" movement is

confirmed by the lighting of the direction

Rechargeable hybrid vehicles

indicators followed by an audible signal.

The function is not available when the

"Sideward kicking" movements do not

vehicle is connected.

work. If the "kicking" movement has not

been detected, wait at least 2 seconds before

► To activate/deactivate the automatic locking

repeating the movement.

of the vehicle when closing the tailgate with the

Do not perform repetitive "kicking"

hands-free function, press this button.

movements.

The green indicator lamp comes on to indicate

If the motorised tailgate has not started to open,

that the function is activated.

check that:

When the vehicle is locked, the request

- the function is activated.

to open the tailgate with this function

- the electronic key is on your person, outside

unlocks the vehicle, or only the tailgate if

the vehicle in the rear recognition area.

selective unlocking is activated, prior to the

- the "kicking" movement was performed in the

opening of the tailgate.

detection zone, close enough to the bumper.

Closing the tailgate with the "Hands-Free

- the foot was removed from the bumper quickly

Tailgate Access" function enables you to lock

enough.

the vehicle.

Recommendations on the hands-free

function (Hands-Free Tailgate Access)

If it does not work, check that the electronic key

is not exposed to a source of electromagnetic

interference (e.g. smartphone).

► Position yourself behind the vehicle by the

The function may be deactivated or affected if

number plate and perform a "kicking" movement

there is rain or snow.

in the "OK" detection zone.

Access

The function may not work correctly with a

► press button C or the exterior control B for

If you are unable to wait, operate it manually.

prosthetic leg.

more than 3 seconds (memorisation is confirmed

In some circumstances, the tailgate may open or

by a brief audible signal).

Manual closing of the

close by itself, particularly when:

Memorising is not available until the

- hitching up or removing a trailer;

motorised tailgate in case of

height of opening is more than or equal

- operating a towing device;

to 1 metre between the low position and the

failure

- fitting or removing a bicycle carrier;

high position of the tailgate.

This operation is only necessary in the case of

- loading or unloading bicycles on/from a bicycle

failure or deinitialisation/loss of the tailgate

carrier;

To delete the memorised position:

motor.

- depositing or lifting something behind the

► open the tailgate to any position.

If the failure originates from the battery, it is

vehicle;

► press button C or the exterior control B for

recommended to recharge it or change it with the

- an animal approaches the rear bumper;

more than 3 seconds (deletion is confirmed by a

tailgate closed.

- washing the vehicle;

long audible signal).

In this situation, a significant force may be

- maintenance is performed on the vehicle;

needed to close the tailgate.

- accessing the spare wheel.

Manual operation

► Close it gently without slamming, as slowly as

To avoid such operating problems, keep the

The tailgate can be manoeuvred by hand, even

possible, by pushing at the centre of the tailgate.

electronic key away from the recognition zone or

with motorised operation activated.

deactivate the hands-free function.

Do not lower the tailgate by pushing at

The tailgate must be stationary.

► Move the tailgate as slowly and smoothly as

one of its sides - risk of damage!

Towing device

The installation of a towing device may

possible.

disturb the detection system.

When opening and closing the motorised tailgate

Precautions in use

► Perform the "kicking" movement on the

manually, there is no assistance from gas struts.

right side of the towing device.

Resistance to opening and closing is therefore

In wintry conditions

entirely normal.

To avoid any operating problems, remove

the snow or wait until the ice melts before

In case of the motor overheating

Memorising an opening

requesting motorised opening of the tailgate.

Repeatedly opening and closing the

position

motorised tailgate can cause overheating of

To memorise a position, in order to limit the

its electric motor, after which opening and

When washing

motorised tailgate opening angle:

closing will not be possible.

When washing the vehicle in an

► move the tailgate to the desired position

Allow at least 10 minutes for the electric

automatic car wash, do not forget to lock and

manually or by pressing the button.

motor to cool down before operating the

move away from the vehicle to prevent any

tailgate again.

risk of unwanted opening.

Access

When the vehicle is parked, the alarm

Door, boot or bonnet

Alarm

will not be triggered if the vehicle is

If an opening is not properly closed,

(Depending on version)

knocked.

the vehicle is not locked, but the exterior

perimeter monitoring will be activated after

Self-protection function

45 seconds, at the same time as the interior

volumetric and anti-tilt monitoring.

The system checks whether any of its

components are out of service.

The alarm is triggered if the battery, the central

Deactivation

control or the siren wiring is put out of service or

► Press one of the remote control unlocking

damaged.

buttons:

Work on the alarm system

short press

System which protects and provides a deterrent

Consult a PEUGEOT dealer or a

against theft and break-ins.

qualified workshop.

long press

Exterior perimeter monitoring

The system checks for opening of the vehicle.

Locking the vehicle with full

► Unlock the vehicle with the Keyless Entry and

The alarm is triggered if anyone tries to open a

alarm system

Start system.

door, the boot or the bonnet, for example.

The monitoring system is deactivated: the

Interior volumetric monitoring

Activation

indicator lamp in the button goes off and the

The system checks for any variation in volume in

direction indicators flash for about 2 seconds.

► Switch off the ignition and exit the vehicle.

the passenger compartment.

► Lock or deadlock the vehicle using the

If the vehicle automatically locks itself

The alarm is triggered if anyone breaks a

remote control or with the Keyless Entry and

again (as happens if a door or the boot is

window, enters the passenger compartment or

Start system.

not opened within 30 seconds of unlocking),

moves inside the vehicle.

When the monitoring system is active, the red

the monitoring system is automatically

Anti-tilt monitoring

indicator lamp in the button flashes once per

reactivated.

The system checks for any change in the attitude

second and the direction indicators come on for

of the vehicle.

about 2 seconds.

The alarm goes off if the vehicle is lifted or

The exterior perimeter monitoring is activated

moved.

after 5 seconds and the interior volumetric and

anti-tilt monitoring after 45 seconds.

Access

Locking the vehicle

Reactivating the interior volumetric

► Switch on the ignition; this stops the alarm.

and anti-tilt monitoring

The indicator lamp in the button goes off.

with exterior perimeter

► Deactivate the exterior perimeter monitoring

monitoring only

Locking the vehicle without

by unlocking the vehicle using the remote control

Deactivate the interior volumetric and anti-tilt

or the Keyless Entry and Start system.

activating the alarm

monitoring to avoid the unwanted triggering of

The indicator lamp in the button goes off.

► Lock or deadlock the vehicle using the key

the alarm, in certain cases such as:

► Reactivate all monitoring by locking the

(built-in the remote control) in the driver's door

- Slightly open window.

vehicle using the remote control or the Keyless

lock.

- Washing the vehicle.

Entry and Start system.

- Changing a wheel.

The red indicator lamp in the button once again

Malfunction

- Towing the vehicle.

flashes every second.

When the ignition is switched on, the fixed

- Transport on a ship or ferry.

lighting of the red indicator lamp in the button

Triggering of the alarm

indicates a system malfunction.

Deactivating the interior volumetric

This is indicated by sounding of the siren

Have it checked by a PEUGEOT dealer or a

and anti-tilt monitoring

and flashing of the direction indicators for 30

qualified workshop.

► Switch off the ignition and within 10 seconds

seconds.

press the alarm button until its red indicator lamp

Depending on the country of sale, certain

is on fixed.

monitoring functions remain active until the alarm

Electric windows

► Get out of the vehicle.

has been triggered eleven times consecutively.

► Immediately lock the vehicle using the remote

When the vehicle is unlocked using the remote

control or the Keyless Entry and Start system.

control or the Keyless Entry and Start system,

Only the exterior perimeter monitoring is

rapid flashing of the red indicator lamp in the

activated; the button's red indicator lamp flashes

button informs you that the alarm was triggered

once every second.

during your absence. When the ignition is

1. Left-hand front

switched on, this flashing stops.

To take effect, this deactivation must be

2. Right-hand front

carried out after each time the ignition is

3. Right-hand rear

Failure of the remote control

switched off.

4. Left-hand rear

To deactivate the monitoring functions:

5. Deactivation of electric window controls

► Unlock the vehicle using the key in the

located by rear seats

driver's door lock.

► Open the door; the alarm is triggered.

Access

Manual operation

between each action), the anti-pinch function

Automatic window closing is no longer

becomes inoperable.

available, only manual closing is

► To open/close the window, press/pull the

Without this protection, the window can only

possible.

switch without passing the point of resistance;

be closed manually - risk of injury!

Remote window closing with the electronic

the window stops as soon as the switch is

key is also no longer available in this case.

released.

Deactivating the rear

The anti-pinch function is inoperable during

Automatic operation

the following sequence of operations.

controls for the rear electric

► To open/close the window, press/pull the

For each window:

switch past its resistance point: the window

windows

► Lower the window fully, then raise it; it will

opens/closes completely when the switch is

rise in steps of a few centimetres each time the

released.

control is pressed. Repeat the operation until the

Operating the switch again stops the movement

window is fully closed.

of the window.

► Continue to pull the control for at least one

second after the window reaches the closed

Window controls remain operational for

position.

approximately 45 seconds after switching

For your children's safety, press control 5 to

off the ignition or after locking the vehicle.

If an electric window meets an obstacle

deactivate the controls for the rear electric

After that time, the controls are disabled.

during operation, the movement of the

windows, irrespective of their positions.

To reactivate them, switch on the ignition or

window must be reversed. To do this, press

The red indicator lamp in the button comes

unlock the vehicle.

the relevant control.

on and a confirmation message is displayed.

When the driver operates the passengers’

The lamp will remain lit until the controls are

Anti-pinch

electric window controls, it is important to

reactivated.

If the window meets an obstacle while rising, it

ensure that nothing can prevent the window

The rear electric windows can still be controlled

stops and immediately partially lowers again.

from closing properly.

using the driver's controls.

It is important to ensure that passengers use

Overtaking of the anti-pinch

the electric windows correctly.

Reinitialising the electric

After triggering the anti-pinch, check

Pay particular attention to children when

that there are no obstacles blocking the

windows

operating the windows.

movement of the window.

After reconnecting the battery, or in the event

Be aware of passengers and/or other persons

Try to close the window again.

of abnormal window movement, the anti-pinch

present when closing windows remotely using

If the window closing is interrupted by the

function must be reinitialised.

the electronic key.

anti-pinch 3 times in a row (max. 10 seconds

Access

Do not put your head or arms through the

Precautions

Operation

open windows when the vehicle is moving -

When opening the sunroof fully, the movable

risk of serious injury!

Do not put your head or arms through the

glass moves to a partially open position, then

sunroof while the vehicle is moving - risk

slides over the roof. Any intermediate position is

of serious injury!

possible.

Panoramic sunroof

Ensure that any luggage or accessories

Depending on the speed of the vehicle,

The panoramic sunroof consists of a movable

carried on the roof bars do not interfere

the partially open position may vary to

glass panel that slides over the roof and a blind

with the movement of the sunroof.

improve the acoustics.

that can be opened independently. Opening the

Do not place heavy loads on the movable

sunroof automatically opens the blind.

glass panel of the sunroof.

Before operating the sunroof or blind

► To operate the panoramic sunroof or the

control buttons, ensure that no object or

blind, use the buttons in the roof console.

If the sunroof is wet, following a rain

person might prevent the movement.

shower or washing the vehicle, wait until

Be particularly aware of children when

it is completely dry before operating it.

operating the sunroof or blind.

Do not operate the sunroof if it is covered by

If something is trapped when operating the

snow or ice - risk of damage!

sunroof or blind, you should reverse the

Use only plastic scrapers to remove snow or

movement of the sunroof or blind by pressing

ice from the sunroof.

the control in question.

The driver must ensure that passengers use

the sunroof and blind correctly.

Regularly check the condition of the

sunroof seals (e.g. presence of dust,

A. Sunroof blind control

Anti-pinch system

dead leaves).

B. Sunroof control

If using a car wash, check first that the roof is

If the sunroof or blind encounters an obstacle

The sunroof or blind can be operated when the

correctly closed and keep the high-pressure

when closing, the movement is automatically

ignition is turned on (if the battery is charged

jet at least 30 centimetres from the seals.

reversed.

enough), with the engine running, in STOP mode

The roof anti-pinch system is designed to be

of Stop & Start, and up to 45 seconds after

Never leave the vehicle with the sunroof

effective at speeds of up to 75 mph (120 km/h).

turning off the ignition or after locking the vehicle.

open.

Opening/Closing

► To open the sunroof or the blind, use the

part of the button located towards the rear of the

vehicle.

Access

► To close the sunroof or the blind, use the part

Reinitialisation

of the button located towards the front of the

Following reconnection of the battery or in the

vehicle.

event of a fault or jerky movement of the sunroof

Operation of buttons

or blind, reinitialisation is required.

► Pressing a button beyond its point of

► Check that nothing is interfering with the

resistance directly opens or closes the sunroof

sunroof or blind and that the seals are clean.

or blind fully.

► With the ignition on, fully close the sunroof

► Pressing the button again stops the current

and blind.

movement.

► Press and hold the front part of button B, until

► When holding a button (without going

the sunroof and blind move slightly, then hold for

beyond the point of resistance), the movement

a further 1 second before releasing.

of the sunroof or blind stops when this button is

► Wait 2 seconds and then press and hold the

released.

front part of button B. The blind and the sunroof

► When the sunroof is closed: pressing once

will open and close, one after the other. When

without passing the point of resistance moves it

both are completely closed again, hold for a

to a partially open position.

further 2 seconds and release.

► When the sunroof is partially open: pressing

If there is an operating fault, restart the

once without passing the point of resistance

whole procedure.

opens or closes it fully.

The sunroof and windows, then the blind,

can be closed by holding down the door

locking control. The manoeuvre stops as soon

as the locking control is released.

Closing of the blind is limited by the

position of the sunroof: the blind cannot

go further than the front of the movable glass.

During simultaneous movements of the

sunroof and blind, the blind automatically

stops or resumes movement depending on

the position of the sunroof.

Ease of use and comfort

The distance between the knees and the

Passenger’s side

Driving position

dashboard should be at least 10 cm, for easy

access to the dashboard controls.

Correct seating position

Adjust the backrest angle to as vertical a position

Adopting a good driving position contributes to

as possible; never tilt it more than 25°.

improving driver comfort and protection.

Adjust the head restraint so that its upper edge is

It also optimises interior and exterior visibility as

level with the top of the head.

well as access to controls.

Adjust the length of the seat cushion to support

Certain seat adjustments described in this

your thighs.

section depend on the trim level and the country

Adjust the lumbar support so that it conforms to

in which the vehicle is sold.

the shape of the spine.

Adjust the steering wheel reach so that it is at

Driver’s side

Sit fully back in the seat with the pelvis, back and

least 25 cm from the sternum and you can hold it

shoulders in contact with the seat backrest.

with your arms slightly bent.

Adjust the longitudinal position of the seat so that

Adjust the steering wheel height so that it does

you are at a distance of at least 25 cm from the

not obstruct the information displayed on the

dashboard.

instrument panel.

Adjust the head restraint so that its upper edge is

As a safety precaution, adjust the seats

level with the top of the head.

only when the vehicle is stationary.

Before moving off

Electrically-adjustable seats

Adjust the interior and exterior door mirrors to

Switch the ignition on to enable the

reduce blind spots.

adjustments to be made.

Fasten the seat belt: place the diagonal belt in

Sit fully back in the seat with your pelvis, back

the middle of the shoulder and adjust the lap belt

and shoulders in contact with the seat backrest.

so that it is tightened across the pelvis.

Adjust the seat cushion height so that your eyes

Ensure that all passengers have fastened their

are level with the centre of the windscreen.

seat belts correctly.

The head should be at a minimum distance of

10 cm from the roof.

Electric door mirrors

Adjust the longitudinal position of the seat so

Switch the ignition on to enable the

that you can fully depress the pedals with legs

adjustments to be made.

slightly flexed.

Ease of use and comfort

When driving

Manually-adjusted seats

5. Lumbar support adjustment

Maintain a good driving position and hold the

(only on the driver's seat)

steering wheel with both hands at the 'quarter to

► Turn the knob forwards or backwards

three' position, so that you can easily and quickly

to increase or decrease the level of lumbar

reach the controls behind and near the steering

support.

wheel.

‘AGR’ certified seats

Never adjust the seats or steering wheel

when driving.

Additional adjustments

Always keep your feet on the floor.

Front seats

Before moving the seat backwards,

ensure that there is no person or object

Longitudinal adjustment of the seat position

that might prevent the full travel of the seat.

► Raise the control bar and slide the seat

Seat cushion length adjustment

There is a risk of trapping or pinching

forwards or backwards.

► Pull the handle forwards to release the

passengers if present in the rear seats or of

► Release the bar to lock the seat in

cushion, then move the front part of the seat

jamming the seat if large objects are placed

position in one of the notches.

cushion forwards or backwards.

on the floor behind the seat.

Seat cushion height adjustment

Seat cushion angle electric adjustment

► Raise or lower the control as many times

► Press and hold the front or rear of the

as needed to obtain the desired height.

button to raise or lower the front part of the

Seat backrest angle adjustment

seat cushion.

► Turn the knob forwards or backwards to

recline the backrest to the desired angle.

► For a passenger seat that can be placed

in the table position, pull the handle and

guide the backrest forwards or backwards.

Head restraint height adjustment

Refer to the corresponding section.

Ease of use and comfort

3. Lumbar support electric adjustment

Folding the backrest

Front head restraints

The control allows independent adjustment of

the depth and vertical position of the lumbar

Adjusting the height

support.

► Press and hold the front or rear of the

control to increase or reduce the lumbar

support.

► Press and hold the top or bottom of the

control to raise or lower the lumbar support

area.

Placing the passenger seat

► Pull the control fully upwards to release the

in the table position

backrest.

The backrest of the passenger seat can be fully

► Tip the backrest fully forwards.

Upwards:

folded forwards and secured in this position.

► Pull the head restraint up to the desired

This function, when associated with folding

In this position, the backrest can support

position; you can feel the head restraint clicking

of the backrest of the rear seats, helps with

a maximum load of 30 kg.

into position.

transporting long and bulky objects.

When sharp deceleration occurs, objects

Downwards:

First steps:

placed on the folded backrest can turn into

► Press lug A to lower the head restraint.

► Lower the head restraint.

projectiles.

► Fold up the “aircraft” type table (depending

The head restraint is correctly adjusted

on version).

when its upper edge is level with the top

Returning the backrest into position

► Move the seat backwards to allow space for

of the head.

► Pull the control fully upwards to release the

the head restraint.

backrest.

► Adjust the seat to the lowest position.

► Raise the backrest and guide it backwards

Removing a head restraint

► Check that there is nothing that might

until it latches into place.

► Pull the head restraint fully up.

interfere with folding of the backrest (seat belt,

► Check that the backrest is correctly latched

► Press lug A to release the head restraint and

child seat, items of clothing, bags, etc.).

into place.

raise it fully.

Deactivation of the front passenger

► Stow the head restraint securely.

airbag is recommended.

Ease of use and comfort

Refitting a head restraint

5. Lumbar support adjustment

► Insert the head restraint rods into the guides

The control allows independent adjustment of

in the corresponding seat backrest.

the depth and vertical position of the lumbar

► Push the head restraint fully down.

support.

► Press the lug A to release the head restraint

► Press and hold the front or rear of the

and push it down.

control to increase or reduce the lumbar

► Adjust the height of the head restraint.

support.

► Press and hold the top or bottom of the

Never drive with the head restraints

control to raise or lower the lumbar support

removed; they should be in place and

area.

adjusted for the occupant of the seat.

Memorising driving

Electrically-adjusted driver's

positions

seat

Seat cushion height and angle adjustment/

Associated with the electrically-adjusted driver’s

To carry out these electric adjustments,

Longitudinal adjustment of the seat position

seat, this function allows two driving positions

switch on the ignition or start the engine

► Raise or lower the front of the control to

to be memorised, to make these adjustments

if the vehicle has gone into energy economy

obtain the desired seat cushion angle.

easier if there are frequent driver changes.

mode.

► Raise or lower the rear of the control to

It records the electric adjustments made to the

These electric adjustments are accessible

raise or lower the seat cushion.

seat and door mirrors.

about 1 minute after opening the driver's door.

► Slide the control forwards or backwards to

They are deactivated about 1 minute after

move the seat forwards or backwards.

switching the ignition off.

Seat backrest angle adjustment

► Turn the control forwards or backwards to

recline the backrest to the desired angle.

Head restraint height adjustment

Refer to the corresponding section.

Seat cushion length adjustment

► Pull the handle forwards to release the

cushion, then move the front part of the seat

cushion forwards or backwards.

Using buttons M/1/2

Ease of use and comfort

► Enter the vehicle and switch the ignition on.

Heated seats

Prolonged use of heated seats is not

► Adjust your seat and the door mirrors.

recommended for people with sensitive

► Press button M, then press button 1 or 2

skin.

within 4 seconds.

There is a risk of burns for people whose

An audible signal confirms the memorisation.

perception of heat is impaired (e.g. illness,

Memorising a new position cancels the previous

taking medication).

position.

To keep the heated pad intact and to prevent

a short circuit:

Recalling a stored position

- Do not place heavy or sharp objects on the

seat.

While the seat is moving, take care that

The function is active only with the engine

- Do not kneel or stand on the seat.

no person or object hinders the

running and when the outside temperature is

- Do not spill liquids onto the seat.

automatic movement of the seat.

below 20°C.

- Never use the heating function if the seat

With the ignition on or engine running

► Press the button corresponding to the seat.

is damp.

► Press button 1 or 2 to recall the

► Each press changes the heating level; the

corresponding position.

corresponding number of indicator lamps come

Multipoint massage

An audible signal sounds when adjustment is

on.

System with a choice of type of massage and

complete.

► To switch off the heating, press the button

adjustment of its intensity.

You can interrupt the current movement by

until all of the indicator lamps are off.

This system operates with the engine running, as

pressing button M, 1 or 2 or by using one of the

The system status is memorised when the

well as in STOP mode of the Stop & Start.

seat adjustment controls.

ignition is switched off.

The massage settings are adjusted via the touch

A stored position cannot be recalled while

Do not use the function when the seat

screen.

driving.

is not occupied.

From the front seat:

The recalling of stored positions is deactivated

Reduce the heating intensity as soon as

► Press this button; its green indicator

45 seconds after switching off the ignition.

possible.

lamp comes on.

When the seat and passenger compartment

The settings page is displayed on the touch

have reached a satisfactory temperature,

screen with the last memorised settings.

switch the function off; reducing electrical

If the settings suit you and you make no

consumption in turn decreases energy

changes, the display returns to its previous state,

consumption.

and the function activates immediately.

Seats must be adjusted one after another,

starting with the driver's seat.

Ease of use and comfort

To modify the settings:

► Adjust the height and reach to suit your

As a safety measure, the mirrors should

► Begin with the driver’s seat.

driving position.

be adjusted to reduce the "blind spots".

► Select a massage intensity from the three

► Push the control to lock the steering wheel.

The objects that you see in the mirrors are

levels offered: "1" (Low), "2" (Normal) or "3"

in fact closer than they appear. Take this

For safety reasons, these adjustments

(High).

into account in order to correctly judge the

must only be carried out with the vehicle

► Select another type of massage from those

distance of vehicles approaching from behind.

stationary.

offered.

► Wait for the driver's seat settings page to

Manual folding

disappear.

Mirrors

The mirrors can be folded manually (parking

► Next, proceed with the passenger's seat in

obstruction, narrow garage, etc.).

the same way.

► Turn the mirror towards the vehicle.

The changes are applied immediately.

Door mirrors

Once activated, the system starts a one hour

Electric folding

massage cycle, made up of sequences of 6

Adjustment

Depending on equipment, the door mirrors can

minutes of massage followed by 3 minutes at

be folded electrically.

rest.

The system automatically stops at the end of the

► From the inside, with the

cycle; the indicator lamp for the button goes off.

ignition on, place control A in the

central position.

► Pull control A backwards.

Steering wheel

► Lock the vehicle from the outside.

adjustment

If the mirrors are folded using control A,

they will not unfold when the vehicle is

unlocked.

► Move control A to the right or to the left to

select the corresponding mirror.

Electric unfolding

► Move control B in any of the four directions

► From outside: unlock the vehicle.

to adjust.

► From inside: with the ignition on, place

► When stationary, pull the control to release

► Return control A to its central position.

control A in the central position and then pull it

the steering wheel.

rearwards.

Ease of use and comfort

Depending on version, the automatic

Interior rear view mirror

Rear head restraints

door mirror folding/unfolding function is

configured via the Driving / Vehicle touch

screen menu.

Otherwise, this setting can be carried out at a

PEUGEOT dealer or a qualified workshop.

Automatic tilting in reverse gear

Depending on version, this function allows to

automatically tilt the mirrors downwards to assist

with parking manoeuvres in reverse gear.

With the engine running, on engaging reverse

gear, the mirror glasses tilt downwards.

They return to their initial position:

- A few seconds after coming out of reverse

The electrochrome system uses a sensor that

gear.

detects the level of exterior brightness and that

- Once the vehicle speed exceeds 6 mph

coming from the rear of the vehicle, in order to

(10 km/h).

automatically and gradually switch between day

- When the engine is switched off.

and night usage.

This function is set via the Driving/

To ensure optimum visibility while

Vehicle touch screen menu.

manoeuvring, the mirror automatically

brightens when reverse gear is engaged.

Demisting/Defrosting

The system is deactivated if the load in the

The demisting/defrosting of the door

boot exceeds the height of the load space

mirrors works with the demisting/

cover or if the load space cover has items

defrosting of the rear screen.

placed on it.

For more information on Rear screen

High position (use):

demisting/defrosting, refer to the

► Pull the head restraint fully up.

corresponding section.

Low position (stowing; when the seats are not

in use):

► Press the lugs A to release the head restraint

and push it down.

Ease of use and comfort

The rear head restraints can be removed.

► If necessary, move the front seats forward.

Rear bench seat

► Check that no person or object might interfere

Removing a head restraint

with the folding of the backrests (e.g. clothing,

► Pull the head restraint fully up.

luggage).

► Press the lugs A to release the head restraint

► Check that the outer seat belts are lying flat

and remove it completely.

Bench seat with fixed cushions and split folding

on the backrests.

► Store the head restraint.

backrests (2/3-1/3) to adapt the boot load space.

► Check that the centre seat belt buckle is

Refitting a head restraint

stored in its housing.

► Insert the head restraint rods into the guides

Folding the backrests

The folding of the backrest is

in the corresponding seat backrest.

accompanied by a slight lowering of the

► Push the head restraint down as far as it will

corresponding cushion.

go.

To obtain a flat surface, it is necessary to

► Press the lugs A to release the head restraint

place the adjustable boot floor in the high

and push it down.

position.

Never drive with passengers seated at

When the backrest is released, the red

the rear when the head restraints are

indicator in the release grip is visible.

removed; the head restraints should be in

place and in the high position.

Folding from the passenger

compartment

Each section of the backrest has two release

controls:

- A grip 1 on the outer edge of the backrest.

- A lever 2 on the boot side trim (depending on

version).

The head restraint for the central

seat and those for the side seats

The backrests should only be

are not interchangeable.

manoeuvred when the vehicle is

stationary.

First steps:

► Lower the head restraints.

► Lift up the rear armrest.

► Press the backrest release grip 1.

Ease of use and comfort

► Guide the backrest 3 down to the horizontal

Seat adjustment

position.

The three second row seats are independent

and of the same width. Their backrests can be

Folding from the boot

folded to adapt the boot load space.

► Put the backrest 3 in the upright position and

push it firmly to latch it home.

► Check that the red indicator is no longer

visible in the release grip 1.

► Ensure that the outer seat belts were not

► Pull the backrest release lever 2 towards you.

trapped during the operation.

The backrest 3 folds fully onto the cushion.

Please note: an incorrectly latched

Repositioning the backrests

backrest compromises the safety of

passengers in the event of sudden braking or

First check that the outer seat belts are

an accident.

lying vertically flat alongside the backrest

The contents of the boot may be thrown

latching rings.

forward - risk of serious injury!

A. Longitudinal adjustment

B. Seat backrest angle adjustment and folding

C. Folding the backrest from behind and

Second row seats

emergency exit for third row passengers

D. Access to third row seats

Ease of use and comfort

Longitudinal adjustment

► Lift control handle B1 and guide the backrest

Before and while performing the

backwards or forwards, raising yourself slightly

operation on the seats, check that the

if needed.

passengers, children in particular, keep their

► Release the handle and ensure the backrest

hands and their feet far from the moving parts

is properly locked on one of the positions offered.

of the seats (hinges, slides, etc.) - risk of

Central seat

serious injury!

► Lift control strap B2 and guide the backrest

backwards or forwards, raising yourself slightly

Folding from the outside

if needed.

► Release the strap and ensure the backrest is

properly locked on one of the positions offered.

Flat floor

► Raise control bar A and slide the seat

forwards or backwards.

► Release the bar to lock the seat in position in

one of the notches.

Seat backrest angle adjustment

► Pull handle B1 or strap B2 until the backrest

is fully folded.

► Release the control.

► Gently push the backrest forwards so that

the backrest tilts until it is folded onto the seat

cushion.

Folding the backrests

► Check that the "aircraft" type tables of the

front seats are properly folded.

► Place the second row seats in the maximum

rear position.

Side seats

Ease of use and comfort

Folding from the boot

► Straighten the backrest until it locks.

Before unfolding the continuity panels,

check that the 2^nd row seats are pulled as

Before performing any operations on the

far back as possible.

rear seats, to avoid damage to the seat

belts, check that the outer seat belts are

properly tensioned. The central seat belt must

Accessing third row seats

be stored in the headlining.

The third row seats are accessed via the second

row side seats.

Continuity panels

When loading, for example, or from the third row

seats:

► Pull strap C to unlock the desired seat and

give the backrest a slight push forwards.

Repositioning the seat

From the outside or from the third row seats:

► Check that the "aircraft" type tables of the

Each seat has a continuity panel at the bottom of

front seats are properly folded up.

the backrest, which, once unfolded:

► Pull paddle D and guide the backrest

- allows for a continuous loading surface in the

forwards to tilt it and move the seat forwards.

boot, whatever the position of the seats,

To put the seat back in place:

- prevents objects from sliding beneath the 2^nd

► Straighten the backrest until the seat locks.

row seats.

Whatever the initial position of the seat, it is

The continuity panels are held against the

placed automatically a third of the way along

backrests with a magnetic fixing element.

the longitudinal adjustment range in order to

These continuity panels are not designed

preserve enough space for passengers in the

to support a weight greater than 30 kg.

third row seats.

► Place the continuity panels of the 2^nd row

seats back up against the backrests.

Ease of use and comfort

If this system fails (paddle D), the third

► Pull one of the straps; the 3 sections of the

row passengers can also get out after

corresponding panel fold into concertina form.

having folded the backrest of the second row

When the 3^rd row seats are straightened, these

seats using strap C.

folded concertina panels can be left upright or

Do not let children operate the seats

flat behind the seats (freeing up the seat well as

unsupervised.

a storage space).

Positioning the seats

Third row seats

These operations are carried out from the boot

When there is a seat at the back of the boot, the

sill, according to the upper label on the back of

removable support is fixed against the front wall

the 3^rd row seats.

of its housing.

If the seat is removed from the back of the boot

The two third row seats are stored in a retracted

for extra storage space, the removable support

position in the bottom of the boot. Each one is

must be installed on the two lugs on the central

covered with rigid concertina panels, secured to

wall.

the vehicle.

Folding the concertina

Do not let children operate the seats

unsupervised.

panels

Each concertina panel can support a

maximum load of 100 kg with the third

row seats folded away.

With the third row seats removed and the

removable concertina panels supports

installed, the maximum load is limited to

50 kg.

Ease of use and comfort

Storing the seats

continuity panels of the 2^nd row seats - Risk of

irreversible damage or breakage!

Do not try to fold back a seat in the 3^rd row

without having opened it until the backrest is

fully locked.

Do not leave anything on or underneath the

cushions of the 3^rd row seats when they are

being folded.

Do not guide strap F when storing the seat -

your fingers may get trapped!

► Remove the load space cover roller.

Removing the seats

► Before doing anything to the 3^rd row seats,

Removing the right-hand seat first is

straighten imperatively the continuity panels of

► Before doing anything to the 3^rd row seats,

recommended in order to facilitate access to the

the 2^nd row seats (step A).

straighten imperatively the continuity panels of

left-hand seat unlocking control.

► Fold back the concertina panel and straighten

the 2^nd row seats.

it vertically.

► Place the head restraints in the low position.

► Pull the black strap E, located behind the

► Check that the seat belts in the 3^rd row are

backrest (step B).

properly stored along the side trims without

The backrest tilts backwards bringing the seat

being folded or twisted.

cushion with it; the seat locks in the open

► Pull red strap F, located at the bottom of the

position.

backrest.

The load space cover roller can be stored behind

The seat is unlocked.

the backrests of the 3^rd row seats.

► Push the backrest slightly forwards.

For more information on the Boot fittings, and

The backrest tilts and folds onto the cushion; the

The seat must be in the folded-away position.

in particular the load space cover roller, refer to

folded seat is stored at the back of its storage

These operations must be performed from the

the corresponding section.

area.

boot sill, according to the lower label on the back

► Reposition the concertina panels above the

of the 3^rd row seats.

retracted seats.

Before doing anything to the 3^rd row

seats, straighten imperatively the

Ease of use and comfort

As long as the seat is not in the correct

position, it must be held with both hands

by the sides, keeping it folded.

► Check in advance that the seat storage well

is empty and that the removable support is

properly secured against the front wall.

► Fold back the concertina panel.

► While keeping the yellow lever held up as far

as possible, raise the rear part of the seat using

the red strap F (step 2).

► While holding it by the sides at the plastic

covers, tilt the seat forwards.

► Simultaneously place both hooks located at

the front of the seat onto the coloured securing

► Lift the yellow lever G, located on the right-

lugs on the right and left at the bottom of the seat

hand side, as far upwards as possible to unlock

well.

the seat (step 1).

Check that the front hooks of the seat are

► Once the rear part of the seat has been

positioned correctly on the two lugs.

raised, take hold of each side of the seat

If they are not, you must remove the seat and

cushion, at the plastic covers, then bring the

start the procedure again.

seat towards you, keeping it at the same angle

(step 3).

Repositioning the seats

These operations must be performed from the

boot sill.

Ease of use and comfort

Configuration examples

Operations on the seats must only be

done when the vehicle is stationary.

Heating and Ventilation

Air intake

The air circulating in the passenger compartment

► Release the rear part of the seat which will

is filtered and originates either from the

lock in place under its own weight.

exterior, via the grille located at the base of the

The yellow lever G folds back automatically.

windscreen, or from the inside in air recirculation

7 seats

5 seats

Transport of

mode.

If the seat is not perfectly horizontal, do

objects

Controls

not press on the backrest and do not try

to unfold it - risk of damaging the mechanism!

Depending on version, the controls are

Take out the seat and start the operation

accessible in the Climate touch screen menu

again.

or are grouped together on the centre console

panel.

Air distribution

Seat modularity

6 seats

4 seats

By folding the second row seats and

retracting the third row seats, you obtain

a continuous storage floor through to the back

of the front seats.

By placing the front passenger seat in the

1. Windscreen demisting/de-icing vents

table position, you obtain a continuous

2. Front side window demisting/de-icing vents

storage floor through to the dashboard.

3. Adjustable and closable side air vents

Ease of use and comfort

of interior air recirculation. Risk of misting and

Stop & Start / e-Auto mode

4. Adjustable and closable central air vents

deterioration of the air quality!

The heating and air conditioning systems

5. Air outlets to the front footwells

only operate when the engine is running.

6. Air outlets to the rear footwells

7. Adjustable and closable air vents, with blower

If the interior temperature is very high

Temporarily deactivate the corresponding

(depending on version)

after the vehicle has stood for a long

system to maintain a comfortable temperature

time in the sunshine, air the passenger

in the passenger compartment.

compartment for a few moments.

For more information, refer to the

Advice

Put the air flow control at a setting high

corresponding section.

Using the ventilation and air

enough to quickly change the air in the

conditioning system

passenger compartment.

Rechargeable hybrid vehicles

► To ensure that air is distributed evenly,

Intensive use of the air conditioning

keep the external air intake grilles at the base

Condensation created by the air

reduces the vehicle range in Electric mode.

of the windscreen, the nozzles, the vents, the

conditioning results in a discharge of

air outlets and the air extractor in the boot

water underneath the vehicle. This is perfectly

free from obstructions.

normal.

Dual-zone automatic air

► Do not cover the sunshine sensor located

conditioning

on the dashboard; this sensor is used to

Servicing the ventilation and air

regulate the automatic air conditioning

This system automatically controls the activation

conditioning system

system.

of the air conditioning system, regulating the

► Ensure that the passenger compartment

► Operate the air conditioning system for at

temperature, air flow and air distribution inside

filter is in good condition and have the filter

least 5 to 10 minutes once or twice a month to

the passenger compartment.

elements replaced regularly.

keep it in good working order.

This system works with the engine running, but

We recommend using a composite passenger

► If the system does not produce cold air,

access to the ventilation and its controls remains

compartment filter. Its specific active additive

switch it off and contact a PEUGEOT dealer

possible with the ignition on.

helps protect against polluting gases and bad

or a qualified workshop.

Press the Climate menu button to display

smells.

When towing a large load on a steep gradient

the system controls page.

► To ensure correct operation of the

in high temperatures, switching off the air

air conditioning system, have it checked

conditioning increases the available engine

according to the recommendations in the

power, enhancing the towing capacity.

Manufacturer’s service schedule.

Avoid driving for too long with the

ventilation off or with prolonged operation

Ease of use and comfort

Automatic Comfort

programme

This automatic mode ensures optimum

management of the passenger compartment

Temperature adjustment

temperature, air flow and air distribution, based

Air flow adjustment

on the selected comfort level.

Air distribution adjustment

► Press button 9 to activate or deactivate the

Interior air recirculation

air conditioning system’s automatic mode .

Air conditioning on/off

The indicator lamp in the button lights up

Maximum air conditioning

when the air conditioning system is operating

Switching the system off

automatically.

Automatic visibility programme

You can adjust the intensity of the

Automatic comfort programme on/off

automatic Comfort programme by using the

10.

Access to the secondary page

"OPTIONS" button to select one of the available

11.

Selection of settings for the Automatic

settings:

comfort programme (Soft/Normal/Fast)

- "Soft": provides soft and quiet operation by

12.

"AQS (Air Quality System)" function (with

limiting air flow.

pollution sensor) (depending on version)

- "Normal": offers the best compromise

13.

Mono-zone/Dual-zone

between a comfortable temperature and quiet

14.

Temperature conditioning (depending on

operation (default setting).

version)

- "Fast": provides strong and effective air flow.

"REAR" function (depending on version)

To change the current setting (shown by the

corresponding indicator lamp), press button 11

Adjusting the temperature

repeatedly until the desired setting is displayed.

The driver and front passenger can each choose

To ensure passenger comfort in the rear seats,

their own temperature setting.

favour "Normal" and "Fast" settings.

The value indicated corresponds to a level of

This setting is associated with automatic mode

comfort and not to a precise temperature.

only. However, on deactivation of AUTO mode,

► Press one of the buttons 1 to increase (red)

the indicator lamp for the most recently selected

or decrease (blue) the value.

setting remains on.

It is recommended that you avoid a difference of

Changing the setting does not reactivate AUTO

more than 3°C in the settings for left and right.

mode if it was deactivated.

Ease of use and comfort

In cold weather with the engine cold, the

Recirculation is automatically activated when the

Windscreen and side windows.

air flow is increased gradually until the

windscreen wash is used or when reverse gear

comfort setting has been reached, in order to

is engaged.

Central and side air vents.

limit the delivery of cold air into the passenger

The function does not operate if the exterior

compartment.

temperature is below 5 °C, to avoid the risk of

Footwells.

On entering the vehicle, if the interior

misting of the windscreen and side windows.

temperature is much colder or warmer than

To activate or deactivate the function, go to the

The lighting of the button indicates that air is

the comfort setting requested, there is no

secondary page by using the "OPTIONS" button,

being blown in the specified direction.

need to alter the value displayed to more

then press button 12.

For a uniform distribution of air in the passenger

quickly reach the required level of comfort.

compartment, the three buttons can be activated

The system automatically corrects the

Manual control

simultaneously.

temperature difference as quickly as possible.

It is possible to manually adjust one or more

In AUTO mode, the indicator lamps in all three

of these functions, while the system retains

buttons 3 are off.

automatic control of the other functions:

Automatic Visibility

- air flow.

Air conditioning on/off

programme

- air distribution.

The air conditioning system is designed to

For more information on button 8, refer to the

The indicator lamp in the "AUTO” button goes

operate effectively in all seasons, with the

“Front Demisting/Defrosting” section.

out if a setting is changed.

windows closed.

► Press button 9 again to reactivate the

It is used to:

"Air Quality System" (AQS)

automatic Comfort programme.

- lower the temperature in summer,

- increase the effectiveness of demisting in

function

Adjusting the air flow

winter, above 3°C.

Using a pollution sensor, this function

► Press one of the buttons 2 (- or +) to increase

► Press button 5 to activate/deactivate the air

automatically activates recirculation of the

or decrease air flow.

conditioning system.

interior air once a certain level of polluting

The air flow symbol (a fan) is filled in according

When the system is activated, the indicator lamp

substances in the exterior air is detected.

to the request.

in the button comes on.

When the air quality returns to a satisfactory

When the air flow is reduced to a minimum,

level, recirculation of interior air is automatically

Air conditioning does not operate when

ventilation stops.

deactivated.

the air flow is disabled.

"OFF" is displayed alongside the fan.

This function is not designed to detect

To obtain cool air more quickly, enable interior

unpleasant odours.

air recirculation for a brief period. Then return

Adjusting the air distribution

to the intake of exterior air.

► Press the buttons 3 to adjust the air flow

distribution inside the passenger compartment.

Ease of use and comfort

Switching off the air conditioning may result in

Ventilation with the ignition

some discomfort (humidity or misting).

When the ignition is switched on, the ventilation

Maximum air conditioning

system and the air flow 2 and air distribution

This function automatically adjusts the

3 settings in the passenger compartment are

temperature setting to the lowest possible, the

activated, for a period which depends on the

air distribution towards the central and side air

battery charge.

vents, the air flow to maximum and activates

This function does not include the air

interior air recirculation.

conditioning system.

► Press button 6 to activate/deactivate the

function (the indicator lamp will come on/switch

When this function is activated, the rear air

Switching the system off

off).

vents blower starts up. In this case, the rear

► Press button 7; all the indicator lamps of the

Once the function is deactivated, the system

passengers can control the air flow from these

system go out.

returns to the previous settings.

air vents independently of the air conditioning air

This action deactivates all of the functions of the

flow control for the front air vents.

air conditioning system.

Mono-zone/Dual-zone

When the function is deactivated, the maximum

The temperature is no longer regulated. A slight

air flow distributed by the rear air vents is limited

The passenger temperature setting can be linked

flow of air can still be felt, due to the forward

by the air conditioning air flow setting for the

to the driver's setting (mono-zone function).

movement of the vehicle.

front air vents.

It is available in the secondary page which can

The function is available on the secondary

be accessed via the "OPTIONS" button.

page, which can be accessed by pressing the

Interior air recirculation

► Press button 13 to activate the "MONO"

function; its status is displayed as "ON".

“OPTIONS” button.

The intake of exterior air prevents the formation

The function is automatically deactivated if the

► Press button 14 to activate the "REAR"

of mist on the windscreen and side windows.

passenger uses their temperature adjustment

function; its status is displayed as "ON".

Recirculating the interior air isolates the

buttons (dual-zone function).

► Press the “large fan” or “small fan” button to

passenger compartment from outside odours

increase or decrease the air flow.

and fumes and allows the desired passenger

“REAR” function

The corresponding indicator lamps come on.

compartment temperature to be achieved more

If all of the indicator lamps are off, a slight air

rapidly.

flow can still be felt as a result of the vehicle's

► Press this button to activate/deactivate

movement.

the function (confirmed by the

illumination/extinction of the indicator lamp).

Ease of use and comfort

This function is activated automatically

► With the engine running, press this button to

Heated windscreen

when reverse gear is engaged.

activate/deactivate the function (confirmed by an

indicator lamp).

The function is activated when the outside

Front demisting/defrosting

temperature drops below 0°C. It is deactivated

automatically when the engine is switched off.

Automatic Visibility

Rear screen

programme

This mode allows the windscreen and side

demisting/defrosting

windows to be demisted or defrosted as quickly

This demisting/de-icing only works with the

as possible.

engine running.

► Press this button to activate/deactivate

In cold weather, this system heats the bottom of

Depending on version, it also demists/de-ices

the mode (confirmed by the illumination/

the windscreen, as well as the area alongside

the door mirrors.

extinction of the indicator lamp).

the left-hand windscreen pillar.

► Press this button to activate/deactivate

The programme automatically manages the air

Without changing the settings for the air

the function (confirmed by the indicator

conditioning (depending on version), air flow

conditioning system, it allows faster release

lamp coming on/switching off).

and air intake, and provides optimum distribution

of the windscreen wiper blades when they

Demisting/defrosting switches off automatically

towards the windscreen and side windows.

are frozen to the windscreen and helps avoid

to prevent an excessive consumption of

It is possible to manually change the air flow

the accumulation of snow resulting from the

electrical current.

without deactivating the automatic Visibility

operation of the windscreen wipers.

programme.

Switch off demisting/defrosting when

Switching on/off

you no longer need it; reducing

With Stop & Start, when demisting has

electrical consumption in turn decreases

been activated, STOP mode is not

energy consumption.

available.

In wintry conditions, before moving off,

remove all snow or ice on the windscreen

near the camera.

Otherwise, the operation of the equipment

using the camera may be affected.

Ease of use and comfort

Temperature

Operating conditions

- The function is only activated when the

pre-conditioning

ignition is switched off and the vehicle

(Rechargeable hybrid)

locked.

- When the vehicle is not connected, the

This function allows you to programme the

function is only activated if the battery charge

temperature in the passenger compartment to

level is greater than 20%.

reach a pre-defined, non-modifiable temperature

- When the vehicle is not connected and a

(approx. 21°C) before you enter the vehicle, on

recurring programme is active (e.g. from Monday

the days and at the times of your choice.

This indicator lamp comes on fixed when

to Friday), if two temperature pre-conditioning

This function is available when the vehicle is

a temperature pre-conditioning cycle is

sequences are run without the vehicle being

connected or not connected.

programmed. It flashes when temperature pre-

used, the programme will be deactivated.

conditioning is in progress.

Programming

You can set multiple programmes.

(With PEUGEOT Connect Nav)

Front fittings

Each one is saved in the system.

In the Climate > OPTIONS menu:

To optimise the driving range, we recommend

Select Temperature conditioning.

starting a programme while the vehicle is

connected.

► Press + to add a programme.

► Select the time of entry into the vehicle and

Programming can also be carried out

the desired days. Press OK.

from a smartphone using the

► Press ON to activate this programming.

MYPEUGEOT APP application.

The pre-conditioning sequence begins

With PEUGEOT Connect Radio, programming

approximately 45 minutes before the

can only be carried out from a smartphone using

programmed time when the vehicle is connected

the application.

(20 minutes when it is not connected) and is

For more information on Remote functions,

maintained for 10 minutes after.

refer to the corresponding section.

The fan noise that occurs during

temperature pre-conditioning is perfectly

1. Grab handle

normal.

2. Sun visor

3. Card holder

Ease of use and comfort

Observe the maximum power rating to

4. Storage compartment below the steering

avoid damaging the accessory.

wheel

5. Illuminated glove box

6. Door pockets

The connection of an electrical device

7. USB socket / Front 12 V accessory socket

not approved by PEUGEOT, such as a

(120 W)

USB charger, may adversely affect the

8. Storage compartment or Wireless

operation of vehicle electrical systems,

smartphone charger

causing faults such as poor radio reception or

9. Storage compartment

interference with displays in the screens.

10. Cup holder

11. Front armrest with storage

USB socket

12. USB sockets or Rear 12 V socket (120 W)

These symbols determine the type of use of a

13. Storage compartment or Rear blower

USB socket:

It houses the front passenger airbag deactivation

Power supply and recharging.

Make sure you do not leave any item in

the passenger compartment which could

switch.

act like a magnifying glass under the effect of

Likewise, plus exchange of multimedia

Never drive with the glove box open

the sun's rays and cause a fire - risk of fire or

data with the audio system.

when a passenger is at the front. It may

damage to interior surfaces!

Likewise, plus use of smartphone

cause injury during sharp deceleration!

applications with the touch screen.

Sun visor

12 V accessory socket

► With the ignition on, raise the concealing

flap; depending on the version, the mirror is

illuminated automatically.

This sun visor is also equipped with a ticket

holder.

Glove box

The USB socket allows the connection of a

► To open the glove box, lift the handle.

portable device or a USB memory stick.

With the ignition on, the glove box is lit when

► Plug in a 12 V accessory (with a maximum

It reads the audio files that are sent to your audio

open.

rated power of 120 W) using a suitable adapter.

system and played via the vehicle's speakers.

Ease of use and comfort

These files can be managed using the steering-

FOCAL^® Hi-Fi system

Wireless smartphone

mounted controls or those on the touch screen.

charger

Depending on version, the USB

socket located on the centre

console also allows a smartphone to be

connected by Android Auto^® or CarPlay^®,

enabling certain smartphone applications to be

used on the touch screen.

For best results, use a cable made or approved

by the device manufacturer.

These applications can be managed using the

steering-mounted controls or the audio system

This system allows wireless charging of a

controls.

The vehicle is equipped with a high-fidelity

portable device such as a smartphone, using the

When the USB socket is used, the

magnetic induction principle, in accordance with

acoustic system from the French brand FOCAL^®.

portable device charges automatically.

the Qi 1.1 standard.

10 speakers incorporating exclusive FOCAL^®

While charging, a message is displayed if the

The portable device to be charged must be

technologies offer the pleasure of pure and

power drawn by the portable device exceeds

compatible with the Qi standard, either by design

detailed sound inside the vehicle:

the current supplied by the vehicle.

or by using a compatible holder or shell.

- Polyglass technology central speaker/mid-

For more information about how to use this

A mat can also be used provided that it is

range satellite speakers: sound immersion and

equipment, refer to the sections describing

approved by the Manufacturer.

spatialisation.

the audio and telematics systems.

The charging area is identified by the Qi symbol.

- Polyglass technology woofers/mid-ranges with

high excursion: balance, dynamics and precision

The charger works with the engine running and

of sound.

with the Stop & Start system in STOP mode.

- Aluminium TNF inverted dome tweeter:

Charging is managed by the smartphone.

optimal sound dispersion, detailed treble.

With the Keyless Entry and Start system, the

- 12 channel active amplification - 515 Watts

charger’s operation may be briefly disrupted

Hybrid Class AB/Class D technology: breadth

when a door is opened or the ignition is switched

and finesse in the high frequency signals, as well

off.

as real power in the bass.

Charging

- Subwoofer with high excursion Power

Flower^TM triple coil technology: deep and

► With the charging area clear, place a device

controlled reproduction of low frequencies.

in its centre.

Ease of use and comfort

Front armrest

State of the

Meaning

When the portable device is detected, the

It includes a refrigerated storage space.

indicator lamp

charger’s indicator lamp lights up green. It

remains lit for the whole time that the battery is

Off

Engine switched off.

Opening

being charged.

No compatible devices

detected.

The system is not designed to charge

Charging complete.

multiple devices simultaneously.

Fixed green

Compatible portable

device detected.

Do not leave metal objects (e.g. coins,

Charging.

keys, vehicle remote control) in the

charging area while a device is being charged

Flashing orange

Foreign object detected in

- Risk of overheating or interrupting the

the charging zone.

charging!

Portable device not well

► Press the lever beneath the cover.

centred in the charging

The cover opens in two parts.

zone.

Fixed orange

Malfunction of the

Storage

portable device's battery

When using applications for a long time

meter.

in combination with wireless charging,

Device battery

some smartphones may switch to thermal

temperature too high.

safety and cause some functions to stop.

Charger malfunction.

Checking operation

If the indicator lamp is fixed orange:

The state of the indicator lamp allows the

- remove the device, then place it back in the

operation of the charger to be monitored.

centre of the charging zone.

The small removable tray can be installed in

- remove the device and try again in a quarter

front of or behind the storage space.

of an hour.

A ventilation nozzle circulates fresh air.

If the problem persists, have the system checked

by a PEUGEOT dealer or a qualified workshop.

Ease of use and comfort

Closing

Removing/refitting

► To remove it on the driver's side, move the

seat backwards and unclip the fasteners.

► To refit it, position the mat and secure it by

pressing down.

► Check that the mat is secured correctly.

To avoid any risk of jamming the pedals:

- Only use mats which are suited to the

fixings already present in the vehicle; these

fixings must be used.

- Never fit one mat on top of another.

3. Rear courtesy lamp

► Fold back the two parts of the cover.

The use of mats not approved by PEUGEOT

4. Rear reading lamps

may interfere with access to the pedals and

Mats

hinder the operation of the cruise control/

Front and rear courtesy

speed limiter.

Fitting

The approved mats have two fasteners

lamps

located underneath the seat.

In this position, the courtesy lamp comes

on gradually:

- when the vehicle is unlocked.

Courtesy lamps

- when the key is removed from the ignition

switch.

- when a door is opened.

- when the remote control locking button is

activated, in order to locate the vehicle.

It switches off gradually:

- when the vehicle is locked.

- when the ignition is switched on.

When fitting it on the driver's side, only use

- 30 seconds after the last door is closed.

the mountings present on the carpet (a "click"

Permanently off.

1. Front courtesy lamp

indicates proper locking).

2. Front reading lamps

The other mats are simply laid over the carpet.

Permanent lighting.

Ease of use and comfort

In "Permanent lighting" mode, the lighting time

Rear fittings

USB sockets

varies according to the circumstances:

- With the ignition off, approximately 10 minutes.

12 V accessory socket

- In energy saving mode, approximately 30

seconds.

- With the engine running, unlimited.

When the front courtesy lamp is in the

"Permanent lighting" position, the rear

courtesy lamp also comes on, unless it is in

the "Permanently off" position.

To switch off the rear courtesy lamp, put it in

Each USB socket is used only to power or

the "Permanently off" position.

recharge a portable device.

► To connect a 12 V accessory (maximum

power: 120 W), lift the cover and plug in a

Rear armrest

Reading lamps

suitable adaptor.

► With the ignition on, operate the

The connection of an electrical device

corresponding switch.

not approved by PEUGEOT, such as a

Do not place anything against the

USB charger, may adversely affect the

courtesy lamps.

operation of vehicle electrical systems,

causing faults such as poor radio reception or

interference with displays in the screens.

Interior ambient lighting

The dimmed passenger compartment lighting

improves visibility inside the vehicle when the

light is poor.

Activation/deactivation and adjustment of

the light intensity are set via the Driving/

Vehicle touch screen menu.

Ease of use and comfort

The armrest incorporates two cup holders.

Ski flap

Device for storing and transporting long objects.

Opening

► With the rear armrest lowered, open the flap

by pulling its handle downwards.

► To use the table, lower it fully until it locks in

Fitted to the second row windows, they protect

the low position.

the passenger compartment from the sun's rays.

► To store it, raise the table to the high position,

► Pull the central tab to unroll the blind.

passing the point of resistance.

► Position the blind's clip on the hook.

On the passenger side, do not forget to

Always guide the blind slowly, using the

fold it before placing the backrest in the

tab, while raising or lowering it.

"table" position.

For more information on the Front seats, and

Storage boxes

in particular placing the backrest in the "table"

position, refer to the corresponding section.

Do not place hard or heavy objects on

the table.

They could become dangerous projectiles in

the event of emergency braking or impact.

► Load the objects from inside the boot.

"Aircraft" type tables

Side blinds

Depending on version, the storage boxes are

fitted in the floor, at the foot of the side seats on

the second row.

Ease of use and comfort

On the left-hand side, it may also contain the

For information on installing the High load

temporary puncture repair kit.

retaining net, refer to the corresponding

► To open them, lift the cover by the notch.

section.

Boot fittings

Load space cover shelf

1. Load space cover roller

12 V accessory socket (max. 120 W)

3. Boot lamp

4. Luggage retaining strap

5. Storage brackets of the load space cover

roller

6. Armrest with cup holder and storage

It consists of two sections:

compartment

- a fixed section with an open storage space.

7. Open storage compartment

1. Load space cover shelf

- a movable section which rises when the boot

8. Concertina panels

12V accessory socket (max. 120W)

is opened, with an open storage space.

9. Stowing rings

3. Boot lamp

4. Rear seat folding controls

The stowing rings are designed to secure

5. Hooks

luggage using different types of retaining

6. Stowing rings

nets.

7. Boot floor

These retaining nets are available as an

8. Storage well/Tool box under the floor

option or as an accessory.

9. Open storage compartments

For more information, contact a PEUGEOT

dealer or a qualified workshop.

Ease of use and comfort

In the event of sudden deceleration,

Removal

objects placed on the load space cover

roller can turn into projectiles.

Installation

To remove the load space cover shelf:

► Unhook the two cords.

► Raise the movable section slightly, then

► Remove the roller guides from the rails in

unclip it on each side.

pillars B.

► Unclip the fixed section on each side, then

► Guide the roller as it reels in.

take out the load space cover shelf.

► Unlock the roller by pressing one of the

The load space cover shelf can be stowed under

handles located at the ends of the roller bracket.

► Position the left-hand and right-hand ends of

the boot floor.

the roller in cut-outs A, with the moving flap at

Storage behind the 3^rd row seats

In the event of sudden deceleration,

the front.

objects placed on the load space cover

► Unwind the roller until it reaches the boot

shelf can turn into projectiles.

pillars.

► Insert the roller guides into the rails in pillars

Load space cover roller

In the 5-seat configuration, it is installed behind

the second row seats, with the third row seats

stored folded away.

► Make sure that the 3^rd row seats are folded.

In the 7-seat configuration, it is stored behind the

► Fold the first two concertina panels.

third row seats.

Ease of use and comfort

► Position the roller within the space located

above the armrest, one side after the other, tilting

it slightly.

► Slide the roller as far as possible, until it

reaches the notches at the back of the boot, with

Behind the front seats

the two hinges facing down.

► Unfold the 3^rd row seats.

(Depending on version)

The folded concertina panels can be placed in

the horizontal or upright position.

To fold the 3^rd row seats with the roller stored at

the back, it is necessary to raise the concertina

panels in order to give access to the seat

unlocking controls (red straps).

High load retaining net

This removable net allows the entire loading

► Fold down the rear seats.

volume up to the roof to be used:

► Remove the trim covers on each side,

- behind the front seats (1^st row) when the rear

located in the upper section in the roof.

seats are folded down.

► Position the net's upper hooks in the roof.

- behind the rear seats (2^nd row) when the load

► Attach the net’s straps to the lower anchorage

space cover is removed.

points, located directly below the fixings of the

rear bench seat cushion.

It protects the occupants in case of

► Pull on the straps to stretch the net.

sudden braking.

Once fitted, the net does not prevent

tipping of the rear backrests.

Ease of use and comfort

Behind the rear seats

Behind the front seats

► Remove the load space cover.

► Remove the load space cover roller.

► Remove the trim covers on each side,

► Insert the ends of the bar, one after the other,

located in the upper section in the roof.

into the fixing points in the roof.

► Position the net's upper hooks in the roof.

► Attach the straps of the net to the lower rings,

located on each side trim of the boot.

► Fold down the rear seats.

► Pull on the straps to stretch the net.

► Insert the ends of the bar, one after the other,

2-position boot floor

into the fixing points in the roof.

► Remove the caps from the Top Tether fixings.

► Attach the net’s straps to the lower anchorage

points, located in the housing of the Top Tether

fixings.

This two-position floor allows the boot volume to

► Pull on the straps to stretch the net.

be optimised using the lateral stops located on

the sides:

- High position (100 kg max.): to obtain a flat

floor up to the front seats, when the rear seats

are folded down.

- Low position (150 kg max.): maximum boot

volume.

Ease of use and comfort

On certain versions, the adjustable boot

The connection of an electrical device

floor cannot be fitted in the low position.

not approved by PEUGEOT, such as a

USB charger, may adversely affect the

To change the height:

operation of vehicle electrical systems,

► Lift and pull the floor towards you using its

causing faults such as poor radio reception or

central handle, then use the lateral stops to

interference with displays in the screens.

move it.

► Push the floor all the way forwards to place it

in the desired position.

Boot lamp

It comes on automatically when the boot is

opened and goes off automatically when the

boot is closed.

The lighting time varies according to the

circumstances:

- When the ignition is off, approximately 10

minutes.

► Lift the boot floor as far as possible or lift the

- In energy saving mode, approximately 30

articulated boot mat (depending on version) to

seconds.

access the storage well.

- With the engine running, unlimited.

Depending on version, it includes:

- A temporary puncture repair kit with the tool

To keep it in the inclined position:

kit.

► From the high position, lift the floor towards

- A spare wheel with the tool kit.

the load space cover.

- The traction battery charging cable

► Take it past the retractable stops, then rest

(Rechargeable hybrid).

the floor on these stops.

The load space cover can also be stored here

(depending on version).

Storage well

12 V accessory socket

► To connect a 12 V accessory (maximum

power: 120 W), lift the cover and plug in a

suitable adaptor.

► Switch on the ignition.

Lighting and visibility

These two functions are activated/

Lighting control stalk

deactivated via the Adaptive lighting

menu of the touch screen.

Main lighting

Headlamp dipping

► Rotate the ring forwards/backwards to turn

them on/off.

When the lighting is switched off automatically

("AUTO" position) the foglamps and the dipped

beam headlamps remain on.

Switching on the foglamps is prohibited

in clear weather or in rain, both day and

Automatic illumination of lamps/daytime

night. In these situations, the power of their

running lamps

► Pull the lighting control stalk to switch

beams may dazzle other drivers. They must

Sidelamps only

between dipped and main beam headlamps.

only be used in fog or falling snow (rules may

In "AUTO" and sidelamps mode, pull the lighting

vary depending on country).

Dipped or main beam headlamps

control stalk to switch the main beam headlamps

Do not forget to switch off the foglamps when

on directly ("headlamp flash").

they are no longer necessary.

"Highway function"

Display

Switching off of the lamps when the

With "Full LED" technology headlamps,

Illumination of the corresponding indicator

ignition is switched off

the range of the dipped beam headlamps is

lamp on the instrument panel confirms that the

When the ignition is switched off, all of the

automatically increased once the speed of the

selected lighting is on.

lamps turn off immediately, except for dipped

vehicle is above 68 mph (110 km/h).

A fault with a lamp is signalled by the

beam headlamps if automatic guide-me-home

permanent illumination of this warning

lighting is activated.

"Foggy function"

lamp, accompanied by the display of a message

With "Full LED" technology headlamps,

and an audible signal.

Switching on the lamps after

in order to limit the “whiteout” effect when

switching off the ignition

driving in fog, the brightness of the dipped

Rear foglamps

To reactivate the lighting control, rotate the

beam headlamps is decreased automatically

They only work if the dipped or main

ring to the "AUTO" position, then to the

when the rear foglamps are switched on.

beam headlamps are on.

desired position.

Lighting and visibility

If the driver's door is opened, a temporary

avoid dazzling oncoming drivers. Contact a

audible signal will increase if the speed is

audible signal warns the driver that the lamps

PEUGEOT dealer or a qualified workshop.

above 50 mph (80 km/h).

are on.

They will go off automatically after a period

Daytime running lamps/

Three flashes

of time that depends on the level of charge in

the battery (entering energy economy mode).

Sidelamps

► Press briefly upwards or downwards, without

going beyond the point of resistance; the

These LED lamps at the front and rear of the

direction indicators will flash 3 times.

In some weather conditions (e.g. low

vehicle light up automatically when the engine

The lighting of the rear LED direction indicators

temperature or humidity), misting on the

starts.

is scrolling.

internal surface of the glass of the headlamps

They perform the following functions:

and rear lamps is normal, and will disappear

- Daytime running lamps (lighting control stalk

Parking lamps

after the lamps have been on for a few

at position "AUTO" with adequate ambient light).

(Depending on version)

minutes.

- Sidelamps (lighting control stalk at position

Vehicle side marking by lighting the sidelamps

"AUTO" with low ambient light or "Sidelamps

on the traffic side only.

Never look too closely at the light beam

only" or "Dipped/main beam headlamps").

► Within one minute after switching off the

of LED technology lamps - risk of serious

ignition, operate the lighting control stalk

eye injury!

Direction indicators

upwards or downwards, depending on the side

of the traffic (e.g. when parking on the right, push

the lighting control stalk down to light up on the

left).

This is confirmed by an audible signal and the

lighting of the corresponding direction indicator

lamp on the instrument panel.

► To switch off the parking lamps, return the

lighting control stalk to the central position.

Travelling abroad

Vehicles equipped with manual

► Left or right: lower or raise the lighting control

headlamp beam height adjustment:

stalk, beyond the point of resistance.

If planning to use your vehicle in a country

If you keep the direction indicators on for

that drives on the other side of the road, the

more than 20 seconds, the volume of the

dipped beam headlamps must be adjusted to

Lighting and visibility

Headlamp beam height

Automatic illumination of

adjustment

lamps

0 (Initial setting)

With the lighting control stalk in the “AUTO”

Driver only or driver + front passenger

Manual adjustment of LED

position and if a low level of exterior brightness

1 Driver only or driver + front passenger + row 3

is detected by the rain/sunshine sensor, the

technology headlamps

2 7 people

sidelamps and dipped beam headlamps are

3 7 people + load in the boot

switched on automatically, without any action on

4 Not used

the part of the driver. They may also come on if

5 Driver only + load in the boot

rain is detected, at the same time as automatic

6 Not used

operation of the windscreen wipers.

As soon as the brightness returns to a sufficient

Automatic adjustment of

level or after the windscreen wipers are switched

off, the lamps are switched off automatically.

the Full LED technology

To avoid dazzling other road users, the height

headlamps

Malfunction

of these headlamp beams must be adjusted

This system automatically adjusts the height

In the event of a malfunction of the rain/

according to the load in the vehicle.

of the headlamp beams according to different

sunshine sensor, the vehicle’s lamps

parameters (e.g. vehicle load).

come on and this warning lamp is displayed on

In the event of a malfunction, this warning

the instrument panel, accompanied by an

lamp lights up on the instrument panel,

audible signal and/or the display of a message.

accompanied by the display of a message and

Have it checked by a PEUGEOT dealer or a

0 (Initial setting)

an audible signal.

qualified workshop.

Driver only or driver + front passenger

The system places the headlamp beams in the

1 5 people

Do not cover the rain/sunshine sensor

lowest position.

2 Not used

located at the top centre of the

Have it checked by a PEUGEOT dealer or a

3 5 people + load in the boot

windscreen behind the interior rear view

qualified workshop.

4 Not used

mirror; the associated functions would no

5 Driver only + load in the boot

Do not touch the Full LED technology

longer be controlled.

6 Not used

headlamps - risk of electrocution!

In fog or snow, the rain/sunshine sensor

may detect sufficient light. For this

Lighting and visibility

reason, the lighting will not come on

You can activate/deactivate this function

- If the windscreen is dirty, misted-up or

automatically.

and adjust the welcome lighting duration

masked (e.g. sticker) in front of the camera.

in the Driving / Vehicle touch screen menu.

- If the vehicle is facing highly reflective signs

The inner surface of the windscreen may

or safety barrier reflectors.

Door mirror spotlamps

The system is not able to detect:

become misted up and affect the proper

operation of the rain/sunshine sensor.

These spotlamps facilitate access to the vehicle

- Road users that do not have their own

In humid and cold weather, demist the

by lighting the ground near the front doors.

lighting, such as pedestrians.

windscreen regularly.

When the front courtesy lamp switch is in

- Vehicles with hidden lighting (e.g. travelling

this position, the spotlamps come on

behind a safety barrier on the motorway).

automatically:

- Vehicles at the top or bottom of a steep

- when the vehicle is unlocked.

slope, on winding roads, on crossroads.

Guide-me-home and

- when a door is opened.

welcome lighting

- when a request to locate the vehicle is

Maintenance

received from the remote control.

Clean the windscreen regularly,

Guide-me-home lighting

Whatever the position of the front courtesy lamp

particularly the area in front of the camera.

switch, they also come on with the welcome

The internal surface of the windscreen can

With the ring of the lighting control stalk in the

lighting and guide-me-home lighting functions.

also become misted around the camera.

"AUTO" position and when the light is poor, the

They go off automatically after 30 seconds.

In humid and cold weather, demist the

dipped beam headlamps come on automatically

when the ignition is switched off.

windscreen regularly.

You can activate/deactivate this function

Do not allow snow to accumulate on the

Automatic lighting

and adjust the guide-me-home lighting

bonnet or roof of the vehicle as this could

systems - General

obstruct the camera.

duration in the Driving/Vehicle touch screen

menu.

recommendations

The automatic lighting systems use a detection

Welcome lighting

Automatic headlamp

camera, located at the top of the windscreen.

When the vehicle is unlocked, if the ambient

dipping

light is low and the "Automatic illumination of

Operating limits

headlamps" function is activated, this system

The system may be disrupted or not work

For more information, refer to the

automatically turns on certain exterior lamps

correctly:

General recommendations for

as well as certain lamps in the passenger

- When visibility conditions are poor

automatic lighting systems.

compartment.

(e.g. snowfall, heavy rain).

Peugeot 3008 (2024 year). Manual in english - page 1