Peugeot 5008 (2017 year). Instruction - part 22

39

.

PEUGEOT Connect Nav

Radio

QUESTION

RESPONSE

SOLUTION

The reception quality of the tuned radio station 
gradually deteriorates or the stored stations  
are not working (no sound, 87.5 MHz is 
displayed , etc.).

The vehicle is too far from the transmitter of 
the station or no transmitter is present in the 
geographical area.

Activate the "RDS" function by means of the 
short-cut menu to enable the system to check 
whether there is a more powerful transmitter in 
the geographical area.

The environment (hills, buildings, tunnels, 
basement car parks, etc.) block reception, 
including in RDS mode.

This phenomenon is normal and does not 
indicate a failure of the audio equipment.

The aerial is absent or has been damaged (for 
example when going through a car wash or into 
an underground car park).

Have the aerial checked by a franchised dealer.

I cannot find some radio stations in the list of 
stations received.
The name of the radio station changes.

The station is not received or has changed its 
name in the list.
Some radio stations send other information 
in place of their name (the title of the song for 
example).
The system interprets these details as the 
station name.

Press on the "Update list" button in the "Radio 
stations" secondary menu.

40

PEUGEOT Connect Nav

Media

QUESTION

RESPONSE

SOLUTION

Playback of my USB memory stick starts only 
after a very long wait (around 2 to 3 minutes).

Some files supplied with the memory stick 
may greatly slow down access to reading 
the memory stick (multiplication by 10 of the 
catalogue time).

Delete the files supplied with the memory stick 
and limit the number of sub-folders in the file 
structure on the memory stick.

The CD is ejected every time or is not played.

The CD is upside down, cannot be read, does 
not contain audio files or contains audio files of 
a format not recognised by the audio system.
The CD has been recorded in a format that is 
not compatible with the player (udf, etc.).
The CD is protected by an anti-pirating system 
not recognised by the audio system.

Check that the CD is inserted in the player the 
right way up.
Check the condition of the CD: the CD cannot 
be played if it is too badly damaged.
Check the content in the case of a recorded CD: 
consult the advice in the "AUDIO" section.
The audio system CD does not read DVDs.
Due to insufficient quality, certain burned CDs 
will not be read by the audio system.

There is a long waiting period following the 
insertion of a CD or connection of a USB 
memory stick.

Upon insertion of a new key, the system reads 
a certain amount of data (directory, title, artist, 
etc.). This may take from a few seconds to a few 
minutes.

This is perfectly normal.

The CD sound is of poor quality.

The CD used in scratched or of poor quality.

Insert good quality CDs and store them in 
suitable conditions.

The audio settings (bass, treble, ambience) are 
unsuitable.

Return bass and treble settings to 0, without 
selecting an ambience.

Some information characters in the currently 
playing media are not displayed correctly.

The audio system does not display some types 
of characters.

Use standard characters to name tracks and 
folders.

Playback of streaming files does not start.

The connected device does not automatically 
launch playback.

To start playback from the device.

Names of tracks and playing time are not 
displayed on the audio streaming screen.

The Bluetooth profile does not allow the transfer 
of this information.

41

.

PEUGEOT Connect Nav

Telephone

QUESTION

RESPONSE

SOLUTION

I cannot connect my Bluetooth telephone.

The telephone's Bluetooth function may be 
switched off or the telephone may not be visible.

Check that your telephone has Bluetooth 
switched on.
Check in the telephone settings that it is "visible 
to all".

The Bluetooth telephone is not compatible with 
the system.

You can check the compatibility of your 
telephone at the Brand's website (services).

The volume of the telephone connected in 
Bluetooth mode is inaudible.

The sound depends on both the system and the 
telephone.

Increase the volume of the audio system, to 
maximum if required, and increase the volume 
of the telephone if necessary.

Ambient noise affects the quality of the 
telephone call.

Reduce the ambient noise level (close the windows, 
reduce the booster fan speed, slow down, etc.).

Some contacts are duplicated in the list.

The options for synchronising contacts are 
synchronising the contacts on the SIM card, the 
contacts on the telephone, or both. When both 
synchronisations are selected, some contacts 
may be duplicated.

Select "Display SIM card contacts" or "Display 
telephone contacts".

The contacts are listed in alphabetical order.

Some telephones offer display options. 
Depending on the settings chosen, contacts can 
be transferred in a specific order.

Modify the telephone directory display settings.

The system does not receive SMS.

The Bluetooth mode does not permit sending 
SMS text messages to the system.

42

PEUGEOT Connect Nav

Settings

QUESTION

RESPONSE

SOLUTION

When changing the setting of treble and bass 
the equalizer setting is deselected.
When changing the equalizer setting, the treble 
and bass settings are reset.

The selection of an equalizer setting imposes 
the settings for treble and bass and vice versa.

Modify the treble and bass or equalizer settings 
to obtain the desired musical ambience.

When changing the balance setting, distribution 
is deselected.
When changing the distribution setting, the 
balance setting is deselected.

The selection of a distribution setting imposes 
the balance settings and vice versa.

Modify the balance setting or the distribution 
setting to obtain the desired sound quality.

There is a difference in sound quality between 
the different audio sources.

To allow for optimal listening quality, the 
audio settings can be tailored to different 
sound sources, which can generate audible 
differences when changing source.

Check that the audio settings are adapted to 
the sources listened to. It is recommended that 
the audio settings (Bass:, Treble:, Balance) 
be adjusted to the middle position, select the 
"None" musical ambience and set the loudness 
correction to the "Active" position in CD mode or 
to the "Inactive" position in radio mode.

When the engine is off, the system stops after 
several minutes of use.

When the engine is switched off, the system's 
operating time depends on the state of charge 
of the battery.
In normal off state, the system automatically 
goes into energy economy mode to maintain an 
adequate charge in the battery.

Turn the ignition on to increase the charge of 
the battery.

The date and time cannot be set.

Setting of the date and time is only available 
if the synchronisation with the satellites is 
deactivated.

Settings menu / Options / Time-Date setting. 
Select the "Time" tab and deactivate the "GPS 
synchronisation" (UTC).

43

.

PEUGEOT Connect Nav

44

PEUGEOT Connect Nav

45

.

PEUGEOT Connect Nav

1

.

PEUGEOT Connect Radio

PEUGEOT Connect Radio

Multimedia audio system – 
Applications – Bluetooth

®

 

telephone

Contents

First steps  

2

Steering mounted controls  

3

Menus  

4

Applications  

6

Radio  

7

DAB radio (Digital Audio Broadcasting)  

9

Media  

10

Telephone  

12

Configuration  

18

Frequently asked questions  

21

The different functions and settings 
described vary according to the version 
and configuration of your vehicle.

As a safety measure and because it 
requires sustained attention by the 
driver, the pairing of a Bluetooth mobile 
telephone with the Bluetooth hands-free 
system of your audio system must be 
done with the vehicle stationary and the 
ignition on.

The system is protected in such a way that 
it will only operate in your vehicle.
The display of the Energy Economy 
Mode message signals that a change to 
standby is imminent.

The link below gives access to OSS (Open 
Source Software) codes for the system.
https://www.groupe-psa.com/fr/oss/
https://www.groupe-psa.com/en/oss/

2

PEUGEOT Connect Radio

First steps

With the engine running, a press 
mutes the sound.
With the ignition off, a press turns 
the system on.

Adjustment of the volume.

Use the buttons either side of or below the 
touch screen for access to the menus, then 
press the virtual buttons in the touch screen.

Depending on the model, use the "Source" or 
"Menu" buttons either side of the touch screen 
for access to the menus, then press the virtual 
buttons in the touch screen.

You can display the menu at any time by 
pressing the screen briefly with three fingers.

All of the touch areas of the screen are white.
Press in the grey zone to go back a level or 
confirm.
Press the back arrow to go back a level or 
confirm.

The touch screen is of the "capacitive" 
type.
To clean the screen, use a soft, non-
abrasive cloth (spectacles cloth) with no 
additional product.
Do not use sharp objects on the screen.
Do not touch the screen with wet hands.

*  Depending on equipment. 

Certain information is displayed permanently in 
the upper band of the touch screen:
-  Repeat of the air conditioning information 

(depending on version), and direct access to 
the corresponding menu.

-  Reminder of the Radio Media and 

Telephone menu information.

-  Access to the Settings of the touch screen 

and digital instrument panel.

Selecting the audio source (depending on 
version):
-  FM / AM* / DAB* radio stations.
-  Telephone connected via Bluetooth and 

multimedia broadcast Bluetooth* (streaming).

-  CD player (depending on model).
-  USB key.
-  Media player connected via the auxiliary 

socket (depending on model).

In the "Settings" menu you can create 
a profile for just one person or a group 
of people with common points, with the 
possibility of entering a multitude of 
settings (radio presets, audio settings, 
ambiences, etc.); these settings are taken 
into account automatically.

3

.

PEUGEOT Connect Radio

In very hot conditions, the volume may 
be limited to protect the system. It may go 
into standby (screen and sound off) for at 
least 5 minutes
The return to normal takes place when 
the temperature in the passenger 
compartment has dropped.

Steering mounted controls

Steering mounted controls –  
Type 1

Radio:
Select the previous / next preset 
radio station.
Select the previous / next item in a 
menu or a list.
Media:
Select the previous / next track.
Select the previous / next item in a 
menu or a list.

Radio:
Short press: display the list of radio 
stations.
Long press: update the list.
Media:
Short press: display the list of 
folders.
Long press: display the available 
sorting options.

Change audio source (radio; USB; 
AUX if equipment connected; CD; 
streaming).

Confirm a selection.

Increase volume.

Decrease volume.

Mute / Restore sound by 
simultaneously pressing the 
increase and decrease volume 
buttons.

Steering mounted controls 
– Type 2

Depending on model.

Voice commands:
This control is located on the 
steering wheel or at the end of the 
lighting control stalk (depending on 
model).
Short press, smartphone voice 
commands via the system.

4

21,5

18,5

PEUGEOT Connect Radio

 or 

Increase volume.

 or 

Mute / Restore the sound.
Or
Mute by pressing the volume 
increase and decrease buttons 
simultaneously.
Restore the sound by pressing one 
of the two volume buttons.

 or 

Decrease volume.

 or 

Media (short press): change the 
multimedia source.
Telephone (short press): start 
telephone call.
Call in progress (short press): 
access telephone menu.
Telephone (long press): reject an 
incoming call, end call; when no call 
is in progress, access telephone 
menu.

 or 

Radio (rotate): previous / next 
preset.
Media (rotate): previous / next track, 
move in a list.
Short press: confirm a selection; if 
nothing selected, access to presets.

Radio: display the list of stations.
Media: display the list of tracks.
Radio (press and hold): update the 
list of stations received.

Menus

Depending on model / Depending on version

Air conditioning

Manage the different temperature 
and air flow settings.

5

.

PEUGEOT Connect Radio

Applications

Access configurable equipment.

Radio Media

Select an audio source or radio 
station.

Telephone

Connect a telephone by Bluetooth

®

.

Operate certain applications on 
a smartphone connected via 
MirrorLink

TM

, CarPlay

®

 or Android 

Auto.

Settings

Configure a personal profile and/
or configure the sound (balance, 
ambience, etc.) and the display 
(language, units, date, time, etc.).

Driving

Activate, deactivate or configure 
certain vehicle functions.

6

PEUGEOT Connect Radio

Applications

Viewing photos

Insert a USB memory stick in the USB port.

To protect the system, do not use a USB 
hub.

The system can read folders and image files in 
the formats: .tiff; .gif; .jpg/jpeg; .bmp; .png.

Press "Applications" to display the 
primary page.

Press "Photos".

Select a folder.

Select an image to view.

Press this button to display the 
details of the photo.

Press the back arrow to go back a 
level.

Managing messages

Press "Applications" to display the 
primary page.

Press "SMS".

Select the "SMS" tab.

Press this button to select the 
display settings for messages.

Press this button to search for a 
contact.

Select the "Quick messages" tab.

Navigation

Configure the guidance and select 
your destination via MirrorLink

TM

, 

CarPlay

®

 or Android Auto.

Press this button to select the 
display settings for messages.

7

.

PEUGEOT Connect Radio

Radio

Selecting a station

Press "Radio Media" to display the 
primary page.

Press one of the buttons for an 
automatic search for radio stations.

Or

Move the cursor for a manual search 
for frequencies up or down.

Or

Press the frequency.

Enter the FM and AM waveband 
values using the virtual keypad.

Press "OK" to confirm.

Radio reception may be affected by the 
use of electrical equipment not approved 
by the Brand, such as a USB charger 
connected to the 12 V socket.
The external environment (hills, buildings, 
tunnels, basement car parks, etc.) may 
block reception, including in RDS mode. 
This is a normal effect of the way in 
which radio waves are transmitted and 
does not indicate any failure of the audio 
equipment.

Changing waveband

Press "Radio Media" to display the 
primary page.

Press the "OPTIONS" button to go to the 
secondary page.

Press "Band" to change waveband.

Press in the grey zone to confirm.

Presetting a station

Select a radio station or frequency.

Make a short press on the star 
outline. If the star is solid, the radio 
station is already preset.

Or

Select a radio station or frequency.

Press "Preset".

Make a long press on one of the 
buttons to preset the station.

Activating / Deactivating 
RDS

Press "Radio Media" to display the 
primary page.

Press the "OPTIONS" button to go to the 
secondary page.

Activate / Deactivate "RDS".

Press in the grey zone to confirm.

8

PEUGEOT Connect Radio

The RDS, if activated, enables you to continue 
listening to the same station by automatically 
retuning to alternative frequencies. However, 
in certain conditions, coverage of this RDS 
station may not be assured throughout the 
entire country as radio stations do not cover 
100% of the territory. This explains the loss of 
reception of the station during a journey.

Display text information

The "Radio Text" function allows 
information transmitted by the radio 
station and related to the station or the 
song playing to be displayed.

Press "Radio Media" to display the 
primary page.

Press the "OPTIONS" button to go to the 
secondary page.

Activate / Deactivate "News".

Press in the grey zone to confirm.

Play TA messages

The TA (Traffic Announcement) function 
gives priority to TA alert messages. 
To operate, this function needs good 
reception of a radio station that carries 
this type of message. While traffic 
information is being broadcast, the current 
media is automatically interrupted so that 
the TA message can be heard. Normal 
play of the media previously playing is 
resumed at the end of the message.

Press "Radio Media" to display the 
primary page.

Press the "OPTIONS" button to go to the 
secondary page.

Activate / Deactivate "TA".

Press in the grey zone to confirm.

Audio settings

Press "Radio Media" to display the 
primary page.

Press the "OPTIONS" button to go to the 
secondary page.

Press "Audio settings".

Select the "Tone" or "Balance" 
or "Ringtones" or "Sound" tab to 
configure the audio settings.

Press the back arrow to confirm.

In the tab "Tone", the Ambience audio 
settings, as well as Bass, Medium and 
Treble are different and independent for 
each audio source.
On the "Balance" tab, the All 
passengers, Driver and Front only 
settings are common to all sources.
On the "Sound" tab, activate or deactivate 
"Volume linked to speed", "Auxiliary 
input" and "Touch tones".