|
|
4D–24 TRANSFER CASE (32) Bearing Snap Ring (38) Spacer Disassembly 1. Use a pair of snap ring pliers to remove the snap ring (1). 2. Use a bearing remover 5–8840–2155–0 and puller 5–8840–2027–0 to remove the ball bearing (2). 262RW069 3. Install the front companion flange temporarily. and lock nut wrench 5–8840–2156–0 to remove the 226RW190 5. Remove the front companion flange. transfer case (42). (A/T) 265RW001 8. Use the universal puller to remove the high–low clutch hub and sleeve (6), and transfer input gear (7). 226RS070 |