|
|
8D–164 WIRING SYSTEM Diagnosis Windshield Wiper Does Not Operate At Any Switch Position Step Action Value(s) Yes No 1 Is the fuse C–16 normal? — Go to Step 2 Replace the fuse 2 Is C–36 grounded securely? — Go to Step 3 Ground it securely 3 Disconnect the windshield wiper motor connector Is there continuity between harness side connector — Go to Step 5 Go to Step 4 4 Repair an open circuit between connector C–27 Is the action complete? — Go to Step 3 — 5 1. Disconnect the windshield wiper & washer switch connector I–31. 2. Turn the starter switch on. Is the battery voltage applied between harness side Approx. 12V Go to Step 7 Go to Step 6 6 Repair an open circuit between the fuse C–16 and Is the action complete? — Go to Step 5 — 7 Is the continuity between the windshield wiper and — Repair or replace the windshield wiper motor Repair or replace the switch |