|
|
6E2–254 6VD1 3.2L ENGINE DRIVEABILITY AND EMISSIONS Surges and/or Chuggles Symptom
Step Action Value(s) Yes No 1 DEFINITION: Was the “On-Board Diagnostic (OBD) System Check” — Go to Step 2 Go to OBD System Check 2 1. Perform a bulletin search. correct the condition as instructed in the bulletin. Was a bulletin found that addresses the symptom? — Verify repair Go to Step 3 3 Was a visual/physical check performed? — Go to Step 4 Go to Visual/Physic al Check 4 Be sure that the driver understands transmission Is the customer experiencing a normal condition? — System OK Go to Step 5 5 1. Check the the fuel control heated oxygen sensors (HO2S, B1S1 and B2S1). The fuel control heated Silicone contamination causes a high but false Powertrain Control Module (PCM) and Sensors. 2. If a problem is found, repair as necessary. Was a problem found? — Verify repair Go to Step 6 6 1. Check the fuel pressure. Refer to Fuel System Pressure Test. 2. If a problem is found, repair as necessary. Was a problem found? — Verify repair Go to Step 7 7 Monitor the long term fuel trim on the Tech 2. Is the long term fuel trim significantly in the negative — Go to Step 8 Go to Step 9 8 1. Check items that can cause the engine to run rich. Refer to Diagnostic Aids in DTC P0172 Diagnostic Support. 2. If a problem is found, repair as necessary. Was a problem found? — Go to Step 10 Verify repair 9 1. Check items that can cause the engine to run lean. Refer to Diagnostic Aids in DTC P0171. 2. If a problem is found, repair as necessary. Was a problem found? — Go to Step 10 Verify repair |