|
|
2A–40 POWER-ASSISTED STEERING SYSTEM 7. Loosen the inflator module fixing bolt from behind the steering wheel assembly using a TORX® driver 827RW070 8. Disconnect the yellow 2-way SRS connector and horn lead located behind the inflator module. 827RW073 9. Apply a setting mark (1) across the steering wheel and shaft so parts can be reassembled in their 430RW021 10. Move the front wheels to the straight ahead position, then use steering wheel remover 5–8521–0016–0 CAUTION: Never apply force to the steering wheel 430RX005 |