Nissan Altima L32. Manual - part 686

EXL-28

< FUNCTION DIAGNOSIS >

DIAGNOSIS SYSTEM (BCM)

1: With auto light system.
2: The item is indicated, not monitored.

ACTIVE TEST

TURN SIGNAL R
[ON/OFF]

Each switch status that BCM judges from the combination switch reading function

TURN SIGNAL L
[ON/OFF]

TAIL LAMP SW
[ON/OFF]

HI BEAM SW
[ON/OFF]

HEAD LAMP SW1
[ON/OFF]

HEAD LAMP SW2
[ON/OFF]

PASSING SW
[ON/OFF]

AUTO LIGHT SW

1

[ON/OFF]

FR FOG SW
[ON/OFF]

DOOR SW-DR
[ON/OFF]

The switch status input from front door switch LH

DOOR SW-AS
[ON/OFF]

The switch status input from front door switch RH

DOOR SW-RR
[ON/OFF]

The switch status input from rear door switch RH

DOOR SW-RL
[ON/OFF]

The switch status input from rear door switch LH

DOOR SW-BK

2

[ON/OFF]

—

OPTICAL SENSOR
[V]

1

The value of exterior brightness voltage input from the optical sensor 

Monitor item

[Unit]

Description

Test item

Operation

Description

TAIL LAMP

ON

Transmits the Position light request signal to IPDM E/R with CAN com-
munication to turn the tail lamp ON.

OFF

Stops the tail lamp request signal transmission.

HEAD LAMP

HI

Transmits the high beam request signal with CAN communication to turn 
the headlamp (HI)

LO

Transmits the low beam request signal with CAN communication to turn 
the headlamp (LO).

OFF

Stops the high & low beam request signal transmission.

FR FOG LAMP

ON

Transmits the front fog lights request signal to IPDM E/R with CAN com-
munication to turn the front fog lamp ON.

OFF

Stops the front fog lights request signal transmission.

DAYTIME RUNNING LIGHT*

ON

—

OFF

DIAGNOSIS SYSTEM (BCM)

EXL-29

< FUNCTION DIAGNOSIS >

C

D

E

F

G

H

I

J

K

M

A

B

EXL

N

O

P

*: The item is indicated, not monitored.

FLASHER
FLASHER : CONSULT-III Function

INFOID:0000000004498159

Work support

* : Initial setting

Data monitor

Active test

COMB SW
COMB SW : CONSULT-III Function

INFOID:0000000004498160

DATA MONITOR

CORNERING LAMP*

RH

—

LH

OFF

ILL DIM SIGNAL*

ON

—

OFF

Test item

Operation

Description

Service item

Setting item

Setting

HAZARD ANSWER 
BACK

LOCK ONLY*

Activated when locking.

Sets the hazard warning lamp answer back activation 
when the door is lock/unlock with the request switch or 
the key fob.

UNLK ONLY

Activated when unlock-
ing.

LOCK/UNLK

Activated when locking/
unlocking

OFF

Not activated

Monitor item

[Unit]

Description

TURN SIGNAL R 
[ON/OFF]

Each switch condition that BCM judges from the combination switch reading function

TURN SIGNAL L 
[ON/OFF]

HAZARD SW
[ON/OFF]

The switch status input from the hazard warning switch

RKE LOCK
[ON/OFF]

The lock signal status received from the keyless receiver

RKE UNLOCK
[ON/OFF]

The unock signal status received from the keyless receiver

RKE PANIC
[ON/OFF]

The panic alarm signal status received from the keyless receiver

Test item

Operation

Description

FLASHER

RH

Blinks right turn signal lamp.

LH

Blinks left turn signal lamp.

OFF

Turns turn signal lamps (right and left) OFF.

EXL-30

< FUNCTION DIAGNOSIS >

DIAGNOSIS SYSTEM (BCM)

*: With autolamp system

BATTERY SAVER
BATTERY SAVER : CONSULT-III Function

INFOID:0000000004498161

WORK SUPPORT

* : Initial setting

DATA MONITOR

Monitor item [UNIT]

Description

FR WIPER HI
[OFF/ON]

Displays the status of the FR WIPER HI switch in combination switch judged by BCM with the combination 
switch reading function.

FR WIPER LOW
[OFF/ON]

Displays the status of the FR WIPER LOW switch in combination switch judged by BCM with the combination 
switch reading function.

FR WASHER SW
[OFF/ON]

Displays the status of the FR WASHER switch in combination switch judged by BCM with the combination 
switch reading function.

FR WIPER INT
[OFF/ON]

Displays the status of the FR WIPER INT switch in combination switch judged by BCM with the combination 
switch reading function.

FR WIPER STOP
[OFF/ON]

Displays the status of the front wiper stop position signal received from IPDM E/R via CAN communication.

INT VOLUME
[1 - 7]

Displays the status of wiper intermittent dial position judged by BCM with the combination switch reading 
function

TURN SIGNAL R
[OFF/ON]

Displays the status of theTURN RH switch in combination switch judged by BCM with the combination switch 
reading function.

TURN SIGNAL L
[OFF/ON]

Displays the status of theTURN LH switch in combination switch judged by BCM with the combination switch 
reading function.

TAIL LAMP SW
[OFF/ON]

Displays the status of the TAIL LAMP switch in combination switch judged by BCM with the combination 
switch reading function.

HI BEAM SW
[OFF/ON]

Displays the status of the HI BEAM switch in combination switch judged by BCM with the combination switch 
reading function.

HEAD LAMP SW 1
[OFF/ON]

Displays the status of the HEADLAMP 1 switch in combination switch judged by BCM with the combination 
switch reading function.

HEAD LAMP SW 2
[OFF/ON]

Displays the status of the HEADLAMP 2 switch in combination switch judged by BCM with the combination 
switch reading function.

PASSING SW
[OFF/ON]

Displays the status of the PASSING switch in combination switch judged by BCM with the combination switch 
reading function.

AUTO LIGHT SW*
[OFF/ON]

Displays the status of the AUTO LIGHT switch in combination switch judged by BCM with the combination 
switch reading function.

FR FOG SW
[OFF/ON]

Displays the status of the FR FOG switch in combination switch judged by BCM with the combination switch 
reading function.

Service item

Setting item

Setting

BATTERY SAVER SET

ON*

With the exterior lamp battery saver function

OFF

Without the exterior lamp battery saver function

ROOM LAMP BAT SAV SET

ON*

With the interior room lamp battery saver function

OFF

Without the interior room lamp battery saver function

ROOM LAMP TIMER SET

MODE 1*

30 min.

Sets the interior room lamp battery saver timer operating 
time. 

MODE 2

60 min.

DIAGNOSIS SYSTEM (BCM)

EXL-31

< FUNCTION DIAGNOSIS >

C

D

E

F

G

H

I

J

K

M

A

B

EXL

N

O

P

ACTIVE TEST

* :  Each lamp switch is in ON position.

Monitor item

[Unit]

Description

REQ SW-DR
[ON/OFF]

The switch status input from request switch (driver side)

REQ SW-AS
[ON/OFF]

The switch status input from front request switch (passenger side)

PUSH SW
[ON/OFF]

The switch status input from push-button ignition switch

KEY SW-SLOT
[ON/OFF]

Key switch status input from key slot

DOOR SW-DR
[ON/OFF]

The switch status input from front door switch LH

DOOR SW-AS
[ON/OFF]

The switch status input from front door switch RH

DOOR SW-RR
[ON/OFF]

The switch status input from rear door switch RH

DOOR SW-RL
[ON/OFF]

The switch status input from rear door switch LH

DOOR SW-BK
[ON/OFF]

NOTE:
The item is indicated, not monitored.

CDL LOCK SW
[ON/OFF]

Lock switch status received from central door lock switch by power window switch se-
rial link

CDL UNLOCK SW
[ON/OFF]

Unlock switch status received from central door lock switch by power window switch 
serial link

KEY CYL LK-SW
[ON/OFF]

Lock switch status received from key cylinder switch by power window switch serial 
link

KEY CYL UN-SW
[ON/OFF]

Unlock switch status received from key cylinder switch by power window switch serial 
link

TRNK/HAT MNTR
[ON/OFF]

The switch status input from trunk room lamp switch

RKE-LOCK
[ON/OFF]

Lock signal status received from remote keyless entry receiver

RKE-UNLOCK
[ON/OFF]

Unlock signal status received from remote keyless entry receiver

Test item

Operation

Description

BATTERY SAVER

OFF

Cuts the interior room lamp power supply to turn interior room lamp OFF.

ON

Outputs the interior room lamp power supply to turn interior room lamp ON.*