|
|
Content .. 1562 1563 1564 1565 ..
WCS-122 < SYMPTOM DIAGNOSIS > THE SEAT BELT WARNING CONTINUES SOUNDING, OR DOES NOT SOUND THE SEAT BELT WARNING CONTINUES SOUNDING, OR DOES NOT Description INFOID:0000000004204255 • Seat belt warning does not sound even though driver seat belt is not fastened. • Seat belt warning sounds even though driver seat belt is fastened. Diagnosis Procedure INFOID:0000000004204256 1. CHECK WARNING CHIME OPERATION With the driver door open, turn lighting switch to 1st or 2nd position. YES >> GO TO 2 NO >> Replace combination meter. Refer to MWI-176, "Removal and Installation" 2. CHECK SEAT BELT WARNING LAMP 1. Turn ignition switch ON. 2. Check the operation of the seat belt warning lamp in the combination meter. Is the inspection result normal? YES >> Replace BCM. Refer to BCS-96, "Removal and Installation" NO >> GO TO 3 3. CHECK SEAT BELT BUCKLE SWITCH CIRCUIT Perform inspection of the seat belt buckle switch circuit. Refer to Is the inspection result normal? YES >> GO TO 4 NO >> Repair or replace harness. 4. CHECK SEAT BELT BUCKLE SWITCH UNIT Perform a unit inspection for the seat belt buckle switch. Refer to WCS-21, "Component Inspection" . Is the inspection result normal? YES >> Replace the combination meter. Refer to MWI-176, "Removal and Installation" NO >> Replace the seat belt buckle switch LH. Seat belt fastened : OFF Seat belt not fastened : ON |