|
|
BCS-90 < ECU DIAGNOSIS > [BCM] BCM (BODY CONTROL MODULE) DTC Inspection Priority Chart INFOID:0000000004202284 If some DTCs are displayed at the same time, perform inspections one by one based on the following priority chart. B2608: STARTER RELAY Inhibit engine cranking 500 ms after the following signal communication status becomes B2609: S/L STATUS • Inhibit engine cranking column lock When the following electronic steering column lock conditions B260A: IGNITION RELAY Inhibit engine cranking 500 ms after the following conditions are fulfilled B260F: ENG STATE SIG LOST Maintains the power supply When any of the following conditions is fulfilled B2612: S/L STATUS • Inhibit engine cranking column lock When any of the following conditions is fulfilled ceived normally • The BCM electronic steering column lock control status matches the electronic steering column lock status recognized by the B2617: STARTER RELAY CIRC Inhibit engine cranking 1 second after the starter motor relay control inside BCM becomes B2618: BCM Inhibit engine cranking 1 second after the ignition relay (IPDM E/R) control inside BCM be- B2619: BCM Inhibit engine cranking 1 second after the electronic steering column lock unit power sup- B26E1: ENG STATE NO RECIV Inhibit engine cranking When any of the following conditions is fulfilled Display contents of CONSULT Fail-safe Cancellation Priority DTC 1 • B2562: LOW VOLTAGE 2 • U1000: CAN COMM CIRCUIT 3 • B2190: NATS ANTENNA AMP |