|
|
5. Connect front side air bag module connector. nosis to ensure entire SRS operates properly. (Use CON- Disposal of Air Bag Module and Seat Belt Pre- I Before disposing of air bag module and seat belt pre-tensioner, I When deploying the air bag module and seat belt pre-tensioner, I When deploying the air bag module and seat belt pre-tensioner, I When deploying air bag module and seat belt pre-tensioner, a I Always activate one air bag module at a time. I Due to heat, leave air bag module unattended for more than 30 I Be sure to wear gloves when handling a deployed air bag I Never apply water to the deployed air bag module and seat belt I Wash your hands clean after finishing work. I Place the vehicle outdoors with an open space of at least 6 m I Use a voltmeter to make sure the vehicle battery is fully I Do not dispose of the air bag module and seat belt pre-ten- CHECKING DEPLOYMENT TOOL Connecting to Battery I Place the vehicle outdoors with an open space of at least 6 m I Use a voltmeter to make sure the vehicle battery is fully CAUTION: The battery must show voltage of 9.6V or more. SRS870 SRS005-B SUPPLEMENTAL RESTRAINT SYSTEM (SRS) Front Side Air Bag Module (Cont’d) RS-20 |