|
|
LOW TIRE PRESSURE WARNING LAMP BLINKS WT-41 < SYMPTOM DIAGNOSIS > C D F G H I J K L M A B WT N O P LOW TIRE PRESSURE WARNING LAMP BLINKS Low Tire Pressure Warning Lamp Flashes When Ignition Switch Is Turned On INFOID:0000000009885664 NOTE: If low tire pressure warning lamp flashes as shown, the system is normal. Flash Mode A • This mode shows transmitter status is OFF-mode. Carry out transmitter wake up operation. Refer to . Regarding Wiring Diagram information, refer to . DIAGNOSTIC PROCEDURE 1. CHECK BCM CONNECTORS 1. Turn ignition switch OFF. 2. Disconnect BCM harness connectors. 3. Check terminals for damage or loose connections. YES >> GO TO 2 NO >> Repair or replace damaged parts. 2. CHECK TIRE PRESSURE WARNING CHECK CONNECTOR CIRCUIT Check continuity between BCM harness connector M18 terminal 15 and ground. Is the inspection result normal? YES >> Replace BCM. Refer to BCS-52, "Removal and Installa- . NO >> Repair circuit for short to ground. SEIA0347E Continuity should not exist. ALEIA0014ZZ |