|
|
SYSTEM SYMPTOM TM-143 < SYMPTOM DIAGNOSIS > C E F G H I J K L M A B TM N O P SYMPTOM DIAGNOSIS SYSTEM SYMPTOM Symptom Table INFOID:0000000009885889 • The diagnostics item numbers show the sequence for inspection. Inspect in order from item 1. • Overhaul and inspect inside the A/T only if A/T fluid condition is NG. Refer to No. Items Symptom Condition Diagnostic Item Reference page 1 Shift Large shock. (“N” →“ D” position) ON vehicle 1. Engine idle speed 2. Engine speed signal 3. Accelerator pedal position sensor 4. Control cable adjustment 5. ATF temperature sensor 6. Front brake solenoid valve 7. CAN communication line 8. Fluid level and state 9. Line pressure test 10. Control valve with TCM OFF vehicle 11. Forward brake (Parts behind drum support is impossible . 2 Shock is too large 1 → D 2 . ON vehicle 1. Accelerator pedal position sensor 2. Control cable adjustment 3. Direct clutch solenoid valve 4. CAN communication line 5. Engine speed signal 6. Input speed sensor 7. Output speed sensor and vehicle speed signal 8. Fluid level and state 9. Control valve with TCM OFF vehicle 10. Direct clutch 3 Shock is too large 2 → D 3 . ON vehicle 1. Accelerator pedal position sensor 2. Control cable adjustment 3. High and low reverse clutch solenoid valve 4. CAN communication line 5. Engine speed signal 6. Input speed sensor 7. Output speed sensor and vehicle speed signal 8. Fluid level and state 9. Control valve with TCM OFF vehicle 10. High and low reverse clutch |