Nissan Quest E52. Manual - part 423

DLK-406

< SYMPTOM DIAGNOSIS >

AUTOMATIC SLIDING DOOR SYSTEM DOES NOT OPERATE

• Sliding door LH: Refer to 

DLK-347, "SLIDING DOOR LH : Component Function Check"

.

• Sliding door RH: Refer to 

DLK-349, "SLIDING DOOR RH : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CHECK SLIDING DOOR LOCK STATUS SWITCH

Check sliding door lock status switch.
• Sliding door LH: Refer to 

DLK-334, "SLIDING DOOR LH : Component Function Check"

.

• Sliding door RH: Refer to 

DLK-336, "SLIDING DOOR RH : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace the malfunctioning parts.

6.

REPLACE SLIDING DOOR CONTROL UNIT

1.

Replace sliding door control unit. Refer to 

DLK-500, "RH : Removal and Installation"

 (RH) or 

DLK-500,

"LH : Removal and Installation"

 (LH).

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-42, "Intermittent Incident"

.

POWER ASSIST FUNCTION

POWER ASSIST FUNCTION : Description

INFOID:0000000009649390

Automatic sliding door system power assist function does not operate.

POWER ASSIST FUNCTION : Diagnosis Procedure

INFOID:0000000009649391

1.

CHECK DTC WITH SLIDING DOOR CONTROL UNIT

Check that DTC is not detected with sliding door control unit.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Perform trouble diagnosis relevant to DTC indicated.

2.

CHECK AUTO OPEN/CLOSE FUNCTION

Check automatic sliding door system auto open/close function.

Does sliding door auto open/close with switches?

YES

>> GO TO 3.

NO

>> Refer to 

DLK-412, "ALL SWITCHES : Diagnosis Procedure"

.

3.

REPLACE SLIDING DOOR CONTROL UNIT

1.

Replace sliding door control unit. Refer to 

DLK-500, "RH : Removal and Installation"

 (RH) or 

DLK-500,

"LH : Removal and Installation"

 (LH).

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-42, "Intermittent Incident"

.

UNLOCK-LINKED OPENING FUNCTION

UNLOCK-LINKED OPENING FUNCTION : Description

INFOID:0000000009649392

Automatic sliding door unlock-linked opening function does not operate.

UNLOCK-LINKED OPENING FUNCTION : Diagnosis Procedure

INFOID:0000000009649393

1.

CHECK DTC WITH SLIDING DOOR CONTROL UNIT

AUTOMATIC SLIDING DOOR SYSTEM DOES NOT OPERATE

DLK-407

< SYMPTOM DIAGNOSIS >

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

Check that DTC is not detected with sliding door control unit.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Perform trouble diagnosis relevant to DTC indicated.

2.

CHECK ONE-TOUCH UNLOCK FUNCTION

Check automatic sliding door one-touch unlock function.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Refer to 

DLK-405, "ONE-TOUCH UNLOCK FUNCTION : Diagnosis Procedure"

.

3.

REPLACE SLIDING DOOR CONTROL UNIT

1.

Replace sliding door control unit. Refer to 

DLK-500, "RH : Removal and Installation"

 (RH) or 

DLK-500,

"LH : Removal and Installation"

 (LH).

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-42, "Intermittent Incident"

.

HOLD FUNCTION

HOLD FUNCTION : Description

INFOID:0000000009649394

Automatic sliding door system hold function does not operate.

HOLD FUNCTION : Diagnosis Procedure

INFOID:0000000009649395

1.

CHECK DTC WITH SLIDING DOOR CONTROL UNIT

Check that DTC is not detected with sliding door control unit.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Perform trouble diagnosis relevant to DTC indicated.

2.

CHECK SLIDING DOOR HANDLE SWITCH

Check sliding door handle switch.
• Sliding door LH: Refer to 

DLK-326, "SLIDING DOOR LH : Component Function Check"

.

• Sliding door RH: Refer to 

DLK-328, "SLIDING DOOR RH : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK CLUTCH

Check clutch.
• Sliding door LH: Refer to 

DLK-355, "SLIDING DOOR LH : Component Function Check"

.

• Sliding door RH: Refer to 

DLK-356, "SLIDING DOOR RH : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK FULL LATCH SWITCH

Check full latch switch.
• Sliding door LH: Refer to 

DLK-318, "SLIDING DOOR LH : Component Function Check"

.

• Sliding door RH: Refer to 

DLK-320, "SLIDING DOOR RH : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CHECK HALF LATCH SWITCH

DLK-408

< SYMPTOM DIAGNOSIS >

AUTOMATIC SLIDING DOOR SYSTEM DOES NOT OPERATE

Check half latch switch.
Refer to 

DLK-296, "SLIDING DOOR CONTROL UNIT : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace the malfunctioning parts.

6.

REPLACE SLIDING DOOR CONTROL UNIT

1.

Replace sliding door control unit. Refer to 

DLK-500, "RH : Removal and Installation"

 (RH) or 

DLK-500,

"LH : Removal and Installation"

 (LH).

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-42, "Intermittent Incident"

.

ANTI-PINCH FUNCTION

ANTI-PINCH FUNCTION : Description

INFOID:0000000009649396

Automatic sliding door system anti-pinch function does not operate.

ANTI-PINCH FUNCTION : Diagnosis Procedure

INFOID:0000000009649397

1.

CHECK DTC WITH SLIDING DOOR CONTROL UNIT

Check that DTC is not detected with sliding door control unit.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Perform trouble diagnosis relevant to DTC indicated.

2.

CHECK SLIDING DOOR TOUCH SENSOR

Check sliding door touch sensor.
• Sliding door LH: Refer to 

DLK-351, "SLIDING DOOR LH : Component Function Check"

.

• Sliding door RH: Refer to 

DLK-353, "SLIDING DOOR RH : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK ENCODER

Check encoder.
• Sliding door LH: Refer to 

DLK-311, "SLIDING DOOR LH : Component Function Check"

.

• Sliding door RH: Refer to 

DLK-312, "SLIDING DOOR RH : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK FULL LATCH SWITCH

Check full latch switch.
• Sliding door LH: Refer to 

DLK-318, "SLIDING DOOR LH : Component Function Check"

.

• Sliding door RH: Refer to 

DLK-320, "SLIDING DOOR RH : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CHECK SLIDING DOOR LOCK STATUS SWITCH

Check sliding door lock status switch.
• Sliding door LH: Refer to 

DLK-334, "SLIDING DOOR LH : Component Function Check"

.

• Sliding door RH: Refer to 

DLK-336, "SLIDING DOOR RH : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 6.

AUTOMATIC SLIDING DOOR SYSTEM DOES NOT OPERATE

DLK-409

< SYMPTOM DIAGNOSIS >

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

NO

>> Repair or replace the malfunctioning parts.

6.

CHECK SLIDING DOOR SWITCH

Check sliding door switch.
• Sliding door LH: Refer to 

DLK-315, "SLIDING DOOR LH : Component Function Check"

.

• Sliding door RH: Refer to 

DLK-316, "SLIDING DOOR RH : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 7.

NO

>> Repair or replace the malfunctioning parts.

7.

REPLACE SLIDING DOOR CONTROL UNIT

1.

Replace sliding door control unit. Refer to 

DLK-500, "RH : Removal and Installation"

 (RH) or 

DLK-500,

"LH : Removal and Installation"

 (LH).

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-42, "Intermittent Incident"

.

INTERMITTENT CLUTCH FUNCTION

INTERMITTENT CLUTCH FUNCTION : Description

INFOID:0000000009649398

Automatic sliding door system intermittent clutch function does not operate.

INTERMITTENT CLUTCH FUNCTION : Diagnosis Procedure

INFOID:0000000009649399

1.

CHECK DTC WITH SLIDING DOOR CONTROL UNIT

Check that DTC is not detected with sliding door control unit.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Perform trouble diagnosis relevant to DTC indicated.

2.

CHECK CLUTCH

Check clutch.
• Sliding door LH: Refer to 

DLK-355, "SLIDING DOOR LH : Component Function Check"

.

• Sliding door RH: Refer to 

DLK-356, "SLIDING DOOR RH : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

REPLACE SLIDING DOOR CONTROL UNIT

1.

Replace sliding door control unit. Refer to 

DLK-500, "RH : Removal and Installation"

 (RH) or 

DLK-500,

"LH : Removal and Installation"

 (LH).

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-42, "Intermittent Incident"

.

HAZARD AND BUZZER REMINDER FUNCTION

HAZARD AND BUZZER REMINDER FUNCTION : Description

INFOID:0000000009649400

Automatic sliding door system hazard and buzzer reminder function does not operate.

HAZARD AND BUZZER REMINDER FUNCTION : Diagnosis Procedure

INFOID:0000000009649401

1.

CHECK DTC WITH SLIDING DOOR CONTROL UNIT

Check that DTC is not detected with sliding door control unit.
Is the inspection result normal?