|
|
DAS-18 < SYSTEM DESCRIPTION > [BSW] DIAGNOSIS SYSTEM (BSW CONTROL MODULE) DIAGNOSIS SYSTEM (BSW CONTROL MODULE) CONSULT Function (BSW) INFOID:0000000009940673 APPLICATION ITEMS CONSULT performs the following functions via CAN communication using BSW control module. SELF DIAGNOSTIC RESULT . DATA MONITOR NOTE: ble to this vehicle, refer to CONSULT display items. • SIGNAL B, SIGNAL C are displayed, but not used. ACTIVE TEST CAUTION: • Never perform “Active Test” while driving the vehicle. Diagnosis mode Description Self Diagnostic Result Displays the name of a malfunctioning system stored in the BSW control module Data Monitor Displays BSW control module input/output data in real time Active Test Enables an operational check of a load by transmitting a driving signal from the BSW control module Ecu Identification Displays BSW control module part number CAN Diag Support Monitor Displays a reception/transmission state of CAN communication and BSW communication Monitored item [Unit] SIGNAL A BSW MAI N SIGNAL Description VHCL SPEED SE × × Indicates vehicle speed calculated from BSW control module through CAN communication [ABS BUZZER O/P × Indicates [On/Off] status of BSW warning chime output Shift position × Indicates shift position read from BSW control module through CAN communication (TCM trans- Turn signal × Indicates turn signal operation status read from BSW control module through CAN communica- WARN SYS SW × × Indicates [On/Off] status of BSW switch BSW/BSI WARN LMP × Indicates [On/Off] status of BSW warning lamp output BSW SYSTEM ON × Indicates [On/Off] status of BSW system Test item Description ICC BUZZER Sounds a buzzer used for BSW system by arbitrarily operating ON/OFF BSW/BSI WARNING LAMP The BSW warning lamp can be illuminated by ON/OFF operations as necessary |