PRECAUTIONS
SE-5
< PRECAUTION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
• Apply sealing compound where necessary when installing parts.
• When applying sealing compound, be careful that the sealing compound never protrudes from parts.
• When replacing any metal parts (for example body outer panel, members, etc.), always take rust prevention
measures.
Precaution for Work
INFOID:0000000009652910
• When removing or disassembling each component, be careful not to damage or deform it. If a component
may be subject to interference, always protect it with a shop cloth.
• When removing (disengaging) components with a screwdriver or similar tool, always wrap the component
with a shop cloth or vinyl tape to protect it.
• Protect the removed parts with a shop cloth and keep them.
• Replace a deformed or damaged clip.
• If a part is specified as a non-reusable part, always replace it with new one.
• Always tighten bolts and nuts securely to the specified torque.
• After reinstallation is complete, always check that each part works normally.
• Follow the steps below to clean components.
- Water soluble foul: Dip a soft cloth into lukewarm water, and wring the water out of the cloth to wipe the
fouled area.
Then rub with a soft and dry cloth.
- Oily foul: Dip a soft cloth into lukewarm water with mild detergent (concentration: within 2 to 3%), and wipe
the fouled area.
Then dip a cloth into fresh water, and wring the water out of the cloth to wipe the detergent off. Then rub with
a soft and dry cloth.
• Never use organic solvent such as thinner, benzene, alcohol, and gasoline.
• For genuine leather seats, and use a genuine leather seat cleaner.