|
|
P POSITION WARNING DOES NOT OPERATE DLK-121 < SYMPTOM DIAGNOSIS > [WITH INTELLIGENT KEY SYSTEM] C D E F G H I J L M A B DLK N O P P POSITION WARNING DOES NOT OPERATE Diagnosis Procedure INFOID:0000000009645258 1. CHECK DTC WITH BCM Check that DTC is not detected with BCM YES >> GO TO 2. NO >> Perform trouble diagnosis relevant to DTC indicated. 2. CHECK DTC WITH COMBINATION METER Check that DTC is not detected with combination meter YES >> GO TO 3. NO >> Perform trouble diagnosis relevant to DTC indicated. 3. CHECK INTELLIGENT KEY WARNING BUZZER Check Intelligent Key warning buzzer. DLK-100, "Component Function Check" Is the inspection result normal? YES >> GO TO 4. NO >> Repair or replace the malfunctioning parts. 4. CHECK COMBINATION METER BUZZER Check combination meter buzzer. DLK-77, "Component Function Check" . Is the inspection result normal? YES >> GO TO 5. NO >> Repair or replace the malfunctioning parts. 5. CHECK DOOR SWITCH Check front door switch (driver side). DLK-95, "Component Function Check" . Is the inspection result normal? YES >> GO TO 6. NO >> Repair or replace the malfunctioning parts. 6. CHECK KEY WARNING LAMP Check key warning lamp. DLK-100, "Component Function Check" Is the inspection result normal? YES >> GO TO 7. NO >> Repair or replace the malfunctioning parts. 7. CHECK SHIFT P WARNING LAMP Check shift P warning lamp. DLK-106, "Component Function Check" Is the inspection result normal? YES >> GO TO 8. NO >> Repair or replace the malfunctioning parts. 8. REPLACE BCM 1. Replace BCM. Refer to BCS-70, "Removal and Installation" . 2. Confirm the operation after replacement. YES >> Inspection End. |