Nissan Note E12. Manual - part 151

DLK-108

< SYMPTOM DIAGNOSIS >

TAKE AWAY WARNING DOES NOT OPERATE

TAKE AWAY WARNING DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000009516213

1.

CHECK DTC WITH BCM

Check that DTC is not detected with BCM
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Perform trouble diagnosis relevant to DTC indicated.

2.

CHECK DTC WITH COMBINATION METER

Check that DTC is not detected with combination meter
Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Perform trouble diagnosis relevant to DTC indicated.

3.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.

• Instrument center: Refer to 

DLK-54, "DTC Logic"

.

• Console: Refer to 

DLK-56, "DTC Logic"

.

• Trunk room: Refer to 

DLK-58, "DTC Logic"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK DOOR SWITCH

Check door switch.

Refer to 

DLK-84, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CHECK COMBINATION METER BUZZER

Check combination meter buzzer.

Refer to 

DLK-67, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace the malfunctioning parts.

6.

REPLACE BCM

1. Replace BCM. Refer to 

BCS-67, "Removal and Installation"

.

2. Confirm the operation after replacement.
Is the result normal?

YES

>> Inspection End.

NO

>> Check intermittent incident. Refer to 

GI-41, "Intermittent Incident"

.

INTELLIGENT KEY LOW BATTERY WARNING DOES NOT OPERATE

DLK-109

< SYMPTOM DIAGNOSIS >

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

INTELLIGENT KEY LOW BATTERY WARNING DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000009516214

1.

CHECK DTC WITH BCM

Check that DTC is not detected with BCM
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Perform trouble diagnosis relevant to DTC indicated.

2.

CHECK DTC WITH COMBINATION METER

Check that DTC is not detected with combination meter
Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Perform trouble diagnosis relevant to DTC indicated.

3.

CHECK LO- BATT OF KEY FOB WARN SETTING IN WORK SUPPORT

1. Select INTELLIGENT KEY of BCM.

2. Select LO- BATT OF KEY FOB WARN in WORK SUPPORT mode.

3. Check LO- BATT OF KEY FOB WARN setting in WORK SUPPORT.

Refer to 

BCS-21, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Set ON in LO- BATT OF KEY FOB WARN.

4.

CHECK INTELLIGENT KEY 

Check Intelligent key.

Refer to 

DLK-88, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.

• Instrument center: Refer to 

DLK-54, "DTC Logic"

.

• Console: Refer to 

DLK-56, "DTC Logic"

.

• Luggage room: Refer to 

DLK-58, "DTC Logic"

.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace the malfunctioning parts.

6.

REPLACE BCM

1. Replace BCM. Refer to 

BCS-67, "Removal and Installation"

.

2. Confirm the operation after replacement.
Is the result normal?

YES

>> Inspection End.

NO

>> Check intermittent incident. Refer to 

GI-41, "Intermittent Incident"

.

DLK-110

< SYMPTOM DIAGNOSIS >

DOOR LOCK OPERATION WARNING DOES NOT OPERATE

DOOR LOCK OPERATION WARNING DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000009516215

1.

CHECK DOOR LOCK FUNCTION

Check door lock function.
Does door lock/unlock using door request switch?

YES

>> GO TO 2.

NO

>> Refer to 

DLK-80, "Diagnosis Procedure"

.

2.

CHECK INTELLIGENT KEY WARNING BUZZER

Check Intelligent Key warning buzzer.

Refer to 

DLK-67, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

REPLACE BCM

1. Replace BCM. Refer to 

BCS-67, "Removal and Installation"

.

2. Confirm the operation after replacement.
Is the result normal?

YES

>> Inspection End.

NO

>> Check intermittent incident. Refer to 

GI-41, "Intermittent Incident"

.

KEY ID WARNING DOES NOT OPERATE

DLK-111

< SYMPTOM DIAGNOSIS >

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

KEY ID WARNING DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000009516216

1.

CHECK DTC WITH BCM

Check that DTC is not detected with BCM
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Perform trouble diagnosis relevant to DTC indicated.

2.

CHECK DTC WITH COMBINATION METER

Check that DTC is not detected with combination meter
Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Perform trouble diagnosis relevant to DTC indicated.

3.

CHECK INTELLIGENT KEY

Check Intelligent Key.

Refer to 

DLK-88, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.

• Instrument center: Refer to 

DLK-54, "DTC Logic"

.

• Console: Refer to 

DLK-56, "DTC Logic"

.

• Luggage room: Refer to 

DLK-58, "DTC Logic"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

REPLACE BCM

1. Replace BCM. Refer to 

BCS-67, "Removal and Installation"

.

2. Confirm the operation after replacement.
Is the result normal?

YES

>> Inspection End.

NO

>> Check intermittent incident. Refer to 

GI-41, "Intermittent Incident"

.