Nissan Rogue. Manual - part 428

DMS-14

< BASIC INSPECTION >

[SPORT MODE]

DIAGNOSIS AND REPAIR WORK FLOW

BASIC INSPECTION

DIAGNOSIS AND REPAIR WORK FLOW

Work Flow

INFOID:0000000011279917

DETAILED FLOW

1.

OBTAIN INFORMATION ABOUT SYMPTOM

Interview the customer to obtain as much information as possible about the conditions and environment under

which the malfunction occurs.

>> GO TO 2.

2.

CHECK SYMPTOM

• Check the symptom based on the information obtained from the customer.

• Check if any other malfunctions are present.

>> GO TO 3.

3.

DTC/SYSTEM DIGANOSIS

Perform a DTC/system diagnosis and repair or replace any malfunctioning part.

>> GO TO 4.

4.

FINAL CHECK

Check that the SPORT mode functions normally.
Does it operation normally?

YES

>> End of trouble diagnosis

NO

>> GO TO 2.

DMS

SPORT MODE SWITCH

DMS-15

< DTC/CIRCUIT DIAGNOSIS >

[SPORT MODE]

C

D

E

F

G

H

I

J

K

L

M

B

N

P

A

DTC/CIRCUIT DIAGNOSIS

SPORT MODE SWITCH

Component Function Check

INFOID:0000000011279918

1.

 CHECK SPORT MODE SWITCH OPERATION

1. Turn ignition switch ON.

2. Check SPORT mode indicator lamp turns ON/OFF on combination meter when turn SPORT mode switch

ON/OFF.

Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Proceed to 

DMS-15, "Diagnosis Procedure"

.

Diagnosis Procedure

INFOID:0000000011279919

1.

CHECK SPORT MODE SWITCH CIRCUIT

1. Turn ignition switch OFF.

2. Disconnect SPORT mode switch harness connector.

3. Turn ignition switch ON.

4. Check voltage between SPORT mode switch harness connector terminals.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> GO TO 2.

2.

CHECK GROUND CIRCUIT

1. Turn ignition switch OFF.

2. Check the continuity between SPORT mode switch harness connector and ground.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace damaged parts.

3.

CHECK CIRCUIT BETWEEN COMBINATION METER AND SPORT MODE SWITCH (1)

1. Disconnect combination meter harness connector M76.

2. Check continuity between combination meter harness connector terminal and SPORT mode switch har-

ness connector terminal.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace damaged parts.

4.

CHECK CIRCUIT BETWEEN COMBINATION METER AND SPORT MODE SWITCH (2)

SPORT mode switch

Voltage (Ap-

prox.)

Connector

+

−

Terminal

M2

6

8

5 V

SPORT mode switch

—

Continuity

Connector

Terminal

M2

8

Ground

Existed

Combination meter

SPORT mode switch

Continuity

Connector

Terminal

Connector

Terminal

M76

29

M2

6

Existed

DMS-16

< DTC/CIRCUIT DIAGNOSIS >

[SPORT MODE]

SPORT MODE SWITCH

Check continuity between combination meter harness connector terminal and SPORT mode switch harness

connector terminal.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace damaged parts.

5.

CHECK COMBINATION METER INPUT/OUTPUT SIGNAL

1. Connect all of disconnected connectors.

2. Check input/output signal of combination meter. Refer to 

MWI-25, "Reference Value"

.

Is the inspection result normal?

YES

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

NO

>> Replace combination meter. Refer to 

MWI-84, "Removal and Installation"

.

6.

CHECK SPORT MODE SWITCH

Check SPORT mode switch. Refer to 

DMS-16, "Component Inspection"

.

Is the inspection result normal?

YES

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

NO

>> Replace SPORT mode switch. Refer to 

DMS-18, "Removal and Installation"

.

Component Inspection

INFOID:0000000011279920

1.

CHECK SPORT MODE SWITCH

Check continuity between SPORT mode switch connector terminals.

Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Replace SPORT mode switch. Refer to 

DMS-18, "Removal and Installation"

.

Combination meter

—

Continuity

Connector

Terminal

M76

29

Ground

Not existed

SPORT mode switch

Condition

Continuity

Terminal

6 – 8

SPORT mode switch is depressed.

Existed

SPORT mode switch is released.

Not existed

DMS

THE SPORT MODE INDICATOR LAMP DOES NOT TURN ON

DMS-17

< SYMPTOM DIAGNOSIS >

[SPORT MODE]

C

D

E

F

G

H

I

J

K

L

M

B

N

P

A

SYMPTOM DIAGNOSIS

THE SPORT MODE INDICATOR LAMP DOES NOT TURN ON

Description

INFOID:0000000011279921

The SPORT mode indicator lamp does not turn ON when the SPORT mode switch is operated.

Diagnosis Procedure

INFOID:0000000011279922

1.

CHECK SPORT MODE INDICATOR LAMP FUNCTION

Perform combination meter self-diagnosis mode and check test order 10. Refer to 

MWI-19, "Description"

.

Is the check result normal?

YES

>> GO TO 2.

NO

>> Replace combination meter. Refer to 

MWI-84, "Removal and Installation"

.

2.

CHECK DTC (TCM)

With CONSULT

1. Start the engine.

2. Check “Self Diagnostic Results” in “TRANSMISSION”.
Is any DTC detected?

YES

>> Check DTC detected item. Refer to 

TM-63, "DTC Index"

.

NO

>> GO TO 3.

3.

CHECK DTC (ECM)

With CONSULT

Check “Self Diagnostic Results” in “ENGINE”.
Is any DTC detected?

YES

>> Check DTC detected item. Refer to 

EC-96, "DTC Index"

.

NO

>> GO TO 4.

4.

CHECK DTC (COMBINATION METER)

With CONSULT

Check “Self Diagnostic Results” in “METER/M&A”.
Is any DTC detected?

YES

>> Check DTC detected item. Refer to 

MWI-31, "DTC Index"

.

NO

>> GO TO 5.

5.

CHECK COMBINATION METER INPUT/OUTPUT SIGNAL

With CONSULT

1. Select “Data Monitor” in “METER/M&A”.

2. Select “SPORT MODE IND”.

3. Check that “SPORT MODE IND” turns ON/OFF when SPORT mode switch is operated. Refer to 

MWI-25,

"Reference Value"

.

Is any DTC detected?

YES

>> Replace combination meter. Refer to 

MWI-84, "Removal and Installation"

.

NO

>> GO TO 6.

6.

CHECK SPORT MODE SWITCH CIRCUIT

Check SPORT mode switch circuit. Refer to 

DMS-15, "Diagnosis Procedure"

.

Is any DTC detected?

YES

>> INSPECTION END

NO

>> Repair or replace malfunctioning parts.