|
|
EXL-100 < ECU DIAGNOSIS > BCM (BODY CONTROL MODULE) PUSH SW When push-button ignition switch is not pressed OFF When push-button ignition switch is pressed ON IGN RLY -F/B Ignition switch OFF or ACC OFF Ignition switch ON ON ACC RLY -F/B Ignition switch OFF OFF Ignition switch ACC or ON ON BRAKE SW 1 When the brake pedal is not depressed ON When the brake pedal is depressed OFF DETE/CANCL SW When selector lever is in P position OFF When selector lever is in any position other than P ON SFT PN/N SW When selector lever is in any position other than P or N OFF When selector lever is in P or N position ON S/L -LOCK Electronic steering column lock LOCK status OFF Electronic steering column lock UNLOCK status ON S/L -UNLOCK Electronic steering column lock UNLOCK status OFF Electronic steering column lock LOCK status ON S/L RELAY-F/B Ignition switch OFF or ACC OFF Ignition switch ON ON UNLK SEN-DR Front door LH UNLOCK status OFF Front door LH LOCK status ON PUSH SW -IPDM When push-button ignition switch is not pressed (IPDM E/R sends OFF When push-button ignition switch is pressed (IPDM E/R sends via ON IGN RLY1 F/B Ignition switch OFF or ACC OFF Ignition switch ON ON DETE SW -IPDM When selector lever is in P position (IPDM E/R sends via CAN) OFF When selector lever is in any position other than P (IPDM E/R sends ON SFT PN -IPDM When selector lever is in any position other than P or N (IPDM E/R OFF When selector lever is in P or N position (IPDM E/R sends via CAN) ON SFT P -MET When selector lever is in any position other than P (combination OFF When selector lever is in P position (combination meter sends via ON SFT N -MET When selector lever is in any position other than N (combination OFF When selector lever is in N position (combination meter sends via ON ENGINE STATE Engine stopped STOP While the engine stalls STALL At engine cranking CRANK Engine running RUN S/L LOCK-IPDM Electronic steering column lock LOCK status (IPDM E/R sends via OFF Electronic steering column lock UNLOCK status (IPDM E/R sends ON Monitor Item Condition Value/Status |