Nissan Sentra. Manual - part 748

SEC-20

< SYSTEM DESCRIPTION >

[WITH INTELLIGENT KEY SYSTEM]

DIAGNOSIS SYSTEM (BCM)

INTELLIGENT KEY
INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)

INFOID:0000000010288776

SELF DIAGNOSTIC RESULT

Refer to 

BCS-49, "DTC Index"

.

DATA MONITOR

Monitor Item [Unit]

Main

Description

REQ SW -DR [On/Off]

×

Indicates condition of door request switch LH.

REQ SW -AS [On/Off]

×

Indicates condition of door request switch RH.

REQ SW -BD/TR [On/Off]

×

Indicates condition of trunk open switch.

PUSH SW [On/Off]

Indicates condition of push-button ignition switch.

CLUCH SW [On/Off]

Indicates condition of clutch switch.

BRAKE SW 1 [On/Off]

×

Indicates condition of brake switch.

BRAKE SW 2 [On/Off]

Indicates condition of brake switch.

DETE/CANCL SW [On/Off]

×

Indicates condition of P (park) position.

SFT PN/N SW [On/Off]

×

Indicates condition of P (park) or N (neutral) position.

UNLK SEN -DR [On/Off]

×

Indicates condition of driver door unlock sensor.

PUSH SW -IPDM [On/Off]

Indicates condition of push-button ignition switch received from IPDM E/R on 
CAN communication line.

IGN RLY1 -F/B [On/Off]

Indicates condition of ignition relay 1 received from IPDM E/R on CAN commu-
nication line.

DETE SW -IPDM [On/Off]

Indicates condition of detent switch received from TCM on CAN communication 
line.

SFT PN -IPDM [On/Off]

Indicates condition of P (park) or N (neutral) position from TCM on CAN com-
munication line.

SFT P -MET [On/Off]

Indicates condition of P (park) position from TCM on CAN communication line.

SFT N -MET [On/Off]

Indicates condition of N (neutral) position from IPDM E/R on CAN communica-
tion line.

ENGINE STATE [Stop/Start/Crank/Run]

×

Indicates condition of engine state from ECM on CAN communication line.

VEH SPEED 1 [mph/km/h]

×

Indicates condition of vehicle speed signal received from ABS on CAN commu-
nication line.

VEH SPEED 2 [mph/km/h]

×

Indicates condition of vehicle speed signal received from combination meter on 
CAN communication line.

DOOR STAT -DR [LOCK/READY/UNLK]

×

Indicates condition of driver side door status.

DOOR STAT -AS [LOCK/READY/UNLK]

×

Indicates condition of passenger side door status.

ID OK FLAG [Set/Reset]

Indicates condition of Intelligent Key ID.

PRMT ENG STRT [Set/Reset]

Indicates condition of engine start possibility.

PRMT RKE STRT [Set/Reset]

Indicates condition of engine start possibility from Intelligent Key.

RKE OPE COUN1 [0-19]

×

When remote keyless entry receiver receives the signal transmitted while oper-
ating on Intelligent Key, the numerical value start changing.

RKE OPE COUN2 [0-19]

×

When remote keyless entry receiver receives the signal transmitted while oper-
ating on Intelligent Key, the numerical value start changing.

TRNK/HAT MNTR [On/Off]

Indicates condition of trunk room lamp switch.

RKE-LOCK [On/Off]

Indicates condition of lock signal from Intelligent Key.

RKE-UNLOCK [On/Off]

Indicates condition of unlock signal from Intelligent Key.

RKE-TR/BD [On/Off]

Indicates condition of trunk open signal from Intelligent Key.

DIAGNOSIS SYSTEM (BCM)

SEC-21

< SYSTEM DESCRIPTION >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

SEC

N

O

P

ACTIVE TEST

WORK SUPPORT

RKE-PANIC [On/Off]

Indicates condition of panic signal from Intelligent Key.

RKE-MODE CHG [On/Off]

Indicates condition of mode change signal from Intelligent Key.

Monitor Item [Unit]

Main

Description

Test Item

Description

INSIDE BUZZER

This test is able to check combination meter warning chime operation [Take Out/Knob/Key/
Off].

LCD

This test is able to check combination meter display information [Off/LK WN/OUTKEY/NO 
KY/BATT/INSRT/SFT P/ROTAT/ID NG/B&P I/B&P N].

BATTERY SAVER

This test is able to check battery saver operation [On/Off].

ENGINE SW ILLUMI

This test is able to check push-button ignition switch START indicator operation [On/Off].

PUSH SWITCH INDICATOR

This test is able to check push-button ignition switch indicator operation [On/Off].

TRUNK/BACK DOOR

This test is able to check trunk actuator operation [Open].

INT LAMP

This test is able to check interior room lamp operation [On/Off].

INDICATOR

This test is able to check combination meter warning lamp operation [KEY ON/KEY IND/Off].

FLASHER

This test is able to check hazard lamp operation [LH/RH/Off].

OUTSIDE BUZZER

This test is able to check Intelligent Key warning buzzer operation [On/Off].

HORN

This test is able to check horn operation [On].

P RANGE

This test is able to check CVT shift selector illumination operation [On/Off].

Support Item

Setting

Description

LOCK/UNLOCK BY I-KEY

On*

Door lock/unlock function from Intelligent Key ON. 

Off

Door lock/unlock function from Intelligent Key OFF. 

TRUNK/GLASS HATCH OPEN

On*

Buzzer reminder function from trunk opener switch.

Off

No buzzer reminder function from trunk opener switch.

ANTI KEY LOCK IN FUNCTI

On*

Anti lock out setting ON.

Off

Anti lock out setting OFF.

ANS BACK I-KEY UNLOCK

Off

No buzzer reminder when doors are unlocked with request switch.

On*

Buzzer reminder when doors are unlocked with request switch.

ANS BACK I-KEY LOCK

Horn Chirp

Horn chirp reminder when doors are locked with request switch.

Buzzer*

Buzzer reminder when doors are locked with request switch.

Off

No reminder when doors are locked with request switch.

HORN WITH KEYLESS LOCK

Off

Horn chirp reminder when doors are locked with Intelligent Key.

On*

No horn chirp reminder when doors are locked with Intelligent Key.

ENGINE START BY I-KEY

On*

Engine start function from Intelligent Key ON.

Off

Engine start function from Intelligent Key OFF.

HAZARD ANSWER BACK

Lock/Unlock*

Hazard warning lamp activation when doors are locked/unlocked 
with Intelligent Key or request switch.

Unlock Only

Hazard warning lamp activation when doors are unlocked with Intel-
ligent Key or request switch.

Lock Only

Hazard warning lamp activation when doors are locked with Intelli-
gent Key or request switch.

Off

No hazard warning lamp activation when doors are locked/unlocked 
with Intelligent Key or request switch.

INSIDE ANT DIAGNOSIS

—

This function allows inside key antenna self-diagnosis.

SEC-22

< SYSTEM DESCRIPTION >

[WITH INTELLIGENT KEY SYSTEM]

DIAGNOSIS SYSTEM (BCM)

*: Initial Setting

IMMU
IMMU : CONSULT Function (BCM - IMMU)

INFOID:0000000010288777

SELF DIAGNOSTIC RESULT

Refer to 

BCS-49, "DTC Index"

.

DATA MONITOR

ACTIVE TEST

WORK SUPPORT

CONFIRM KEY FOB ID

—

Intelligent Key ID code can be checked.

SHORT CRANKING OUTPUT

Start

70 msec

Starter motor operation duration time setting.

100 msec

200 msec

End

—

PANIC ALARM SET

MODE 3

1.5 sec

Intelligent Key panic alarm button setting.

MODE 2

OFF

MODE 1*

0.5 sec

LO- BATT OF KEY FOB WARN

On*

Intelligent Key low battery warning ON. 

Off

Intelligent Key low battery warning OFF. 

AUTO LOCK SET

MODE7

5 min

Auto door lock time setting.

MODE6

4 min

MODE5

3 min

MODE4

2 min

MODE3*

1 min

MODE2

30 sec

MODE1

Off

TRUNK OPEN DELAY

MODE 3

1.5 sec

Intelligent Key trunk open button setting.

MODE 2

OFF

MODE 1*

0.5 sec

Support Item

Setting

Description

Monitor Item [Unit]

Description

CONFRM ID ALL [Yet/DONE]

Switches to DONE when an Intelligent Key is registered.

CONFIRM ID4 [Yet/DONE]

CONFIRM ID3 [Yet/DONE]

CONFIRM ID2 [Yet/DONE]

CONFIRM ID1 [Yet/DONE]

TP 4 [Yet/DONE]

DONE indicates the number of Intelligent Key ID which has been registered.

TP 3 [Yet/DONE]

TP 2 [Yet/DONE]

TP 1 [Yet/DONE]

PUSH SW [On/Off]

Indicates condition of push-button ignition switch.

Test Item

Description

THEFT IND

This test is able to check security indicator operation [On/Off]. 

DIAGNOSIS SYSTEM (BCM)

SEC-23

< SYSTEM DESCRIPTION >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

SEC

N

O

P

THEFT ALM
THEFT ALM : CONSULT Function (BCM - THEFT)

INFOID:0000000010288778

DATA MONITOR

ACTIVE TEST

WORK SUPPORT

*: Initial setting

Support Item

Setting

Description

CONFIRM DONGLE ID

—

Dongle ID code can be read.

Monitored Item

Description

REQ SW -DR [On/Off]

Indicates condition of door request switch LH.

REQ SW -AS [On/Off]

Indicates condition of door request switch RH.

REQ SW -BD/TR [On/Off]

Indicates condition of trunk open switch.

PUSH SW [On/Off]

Indicates condition of push-button ignition switch.

UNLK SEN -DR [On/Off]

Indicates condition of driver door unlock sensor.

DOOR SW-DR [On/Off]

Indicates condition of front door switch LH.

DOOR SW-AS [On/Off]

Indicates condition of front door switch RH.

DOOR SW-RR [On/Off]

Indicates condition of rear door switch RH.

DOOR SW-RL [On/Off]

Indicates condition of rear door switch LH.

DOOR SW-BK [On/Off]

Indicates condition of trunk switch.

CDL LOCK SW [On/Off]

Indicates condition of lock signal from door lock and unlock switch.

CDL UNLOCK SW [On/Off]

Indicates condition of unlock signal from door lock and unlock switch.

KEY CYL LK-SW [On/Off]

Indicates condition of lock signal from door key cylinder switch.

KEY CYL UN-SW [On/Off]

Indicates condition of unlock signal from door key cylinder switch.

TR/BD OPEN SW [On/Off]

Indicates condition of trunk open switch.

TRNK/HAT MNTR [On/Off]

Indicates condition of trunk room lamp switch.

RKE-LOCK [On/Off]

Indicates condition of lock signal from Intelligent Key.

RKE-UNLOCK [On/Off]

Indicates condition of unlock signal from Intelligent Key.

RKE-TR/BD [On/Off]

Indicates condition of trunk open signal from Intelligent Key.

Test Item

Description

VEHICLE SECURITY HORN

This test is able to check vehicle security horn operation [On].

FLASHER

This test is able to check turn signal lamp operation [LH/RH/Off].

THEFT IND

This test is able to check security indicator lamp operation [On/Off].

HEADLAMP(HI)

This test is able to check vehicle security lamp operation [On].

Support Item

Setting

Description

SECURITY ALARM SET

Off

Security alarm OFF.

On*

Security alarm ON.

THEFT ALM TRG

Off/On

The switch which triggered vehicle security alarm is recorded [On]. This mode is able 
to confirm and erase the record of vehicle security alarm. The trigger data can be 
erased by touching [CLEAR].

CLEAR