Nissan Sentra. Manual - part 643

MWI-18

< SYSTEM DESCRIPTION >

DIAGNOSIS SYSTEM (COMBINATION METER)

VDC/TCS IND 
[ON/OFF]

Displays [ON/OFF] condition of VDC OFF indicator lamp.

BRAKE W/L
[ON/OFF]

Displays [ON/OFF] condition of brake warning indicator.

DOOR W/L
[ON/OFF]

Displays [ON/OFF] condition of door warning indicator.

HI-BEAM IND
[ON/OFF]

Displays [ON/OFF] condition of high beam indicator.

TURN IND
[ON/OFF]

Displays [ON/OFF] condition of turn indicator.

FR FOG IND
[On/Off]

Displays [ON/OFF] condition of front fog lamp indicator.

LIGHT IND
[ON/OFF]

Displays [ON/OFF] condition of light indicator.

OIL W/L
[ON/OFF]

Displays [ON/OFF] condition of oil pressure warning indicator.

MIL
[ON/OFF] 

Displays [ON/OFF] condition of malfunction indicator.

CRUISE IND
[Off]

Displays [ON/OFF] condition of CRUISE indicator.

O/D OFF IND
[ON/OFF]

Displays [ON/OFF] condition of O/D OFF indicator.

FUEL W/L
[ON/OFF]

Displays [ON/OFF] condition of low-fuel warning indicator.

KEY G/Y W/L
[On/Off]

Displays [ON/OFF] condition of KEY warning lamp (G/Y).

KEY KNOB W/L
[On/Off]

Displays [ON/OFF] condition of shift P warning lamp.

O/D OFF SW
[ON/OFF]

Displays [ON/OFF] condition of O/D OFF switch.

COMP F/B SIG
[On/Off]

A/C compressor activation condition that ECM judges according to the engine 
coolant temperature and the acceleration degree.

BRAKE SW
[ON/OFF]

Displays [ON/OFF] condition of brake switch. 

EPS W/L
[ON/OFF]

Displays [ON/OFF] condition of EPS indicator lamp. 

ECO MODE IND
[On/Off]

Displays [ON/OFF] condition of ECO mode indicator lamp. 

LCD

Displays status of Intelligent Key system warning judged from meter display signal 
received from BCM with CAN communication line.

SHIFT IND
[P, R, N, D, L]

Displays shift selector position.

FUEL CAP W/L
[Off]

Displays [ON/OFF] condition of loose fuel cap warning message.

AIR PRES W/L
[ON/OFF]

Displays [ON/OFF] condition of tire pressure warning lamp.

PKB SW
[ON/OFF]

Status of parking brake switch.

BUCKLE SW
[ON/OFF]

Status of seat belt buckle switch (LH).

PASS BUCKLE SW
[ON/OFF]

Status of passenger seat belt buckle switch (RH).

Display item [Unit]

MAIN

SIGNALS

Description

MWI

DIAGNOSIS SYSTEM (COMBINATION METER)

MWI-19

< SYSTEM DESCRIPTION >

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

NOTE:
Some items are not available according to vehicle specification.

WARNING HISTORY

• Stores histories when warning/indicator lamp is turned on.

• “WARNING HISTORY” indicates the “TIME” when the warning/ indicator lamp is turned on.

• The “TIME” above is:

- 0: The condition that the warning/indicator lamp has been turned on 1 or more times after starting the engine

and waiting for 30 seconds.

- 1 - 39: The number of times the engine was restarted after the 0 condition.

- NO WARNING HISTORY: Stores NO (0) turning on history of warning/indicator lamp.

NOTE:

• WARNING HISTORY is not stored for approximately 30 seconds after the engine starts.

• Brake warning lamp does not store any history when the parking brake is applied or the brake fluid level gets

low.

WORK SUPPORT

BRAKE OIL SW
[ON/OFF]

Status of brake fluid level switch.

A/C AMP CONN
[On/Off]

Status of A/C auto amp. connection recognition signal.

DISTANCE
[km] or [Mi]

Displays distance to empty.

OUTSIDE TEMP
[

°C or °F]

Displays the ambient air temperature, which is input from ambient sensor.

BUZZER
[ON/OFF]

X

Displays [ON/OFF] condition of buzzer.

SPORT MODE IND
[On/Off]

Status of DS mode indicator detected from SPORT indicator signal is received 
from TCM via CAN communication.

ECO DRIVE NAVI
[LEVEL 0 - 30]

Status of ECO pedal guide detected from ECO pedal guide signal received from 
ECM via CAN communication.

Display item [Unit]

MAIN

SIGNALS

Description

Work support item

Description

Turn signal buzzer diagnosis

A possible malfunction can be narrowed down by following dis-
played instructions.

Outside air temperature diagnosis

Fuel meter diagnosis (Analog pointer)

Warning/Indicator lamp diagnosis

MWI-20

< ECU DIAGNOSIS INFORMATION >

COMBINATION METER

ECU DIAGNOSIS INFORMATION

COMBINATION METER

Reference Value

INFOID:0000000009758254

VALUES ON THE DIAGNOSIS TOOL

NOTE:

The following table includes information (items) inapplicable to this vehicle. For information (items) applicable

to this vehicle, refer to CONSULT display items.

Monitor Item

Condition

Value/Status

SPEED METER
[mph or km/h]

Ignition switch 
ON

While driving

Input value of vehicle speed signal 
(CAN communication signal) 

SPEED OUTPUT
[mph or km/h]

Ignition switch 
ON

While driving

Output value of vehicle speed signal 
(CAN communication signal)

ODO OUTPUT
[mph or km/h]

Ignition switch 
ON

—

Output value of odometer signal 
(CAN communication signal)

TACHO METER
[rpm]

Ignition switch 
ON

Engine running

Input value of engine speed signal 
(CAN communication signal)

FUEL METER
[L]

Ignition switch 
ON

—

Input value of fuel level sensor signal

W TEMP METER
[

°C or °F]

Ignition switch 
ON

—

Input value of engine coolant tem-
perature signal (CAN communica-
tion signal)

ABS W/L

Ignition switch 
ON

ABS warning lamp ON

On

ABS warning lamp OFF

Off

BRAKE W/L

Ignition switch 
ON

Brake warning lamp ON

On

Brake warning lamp OFF

Off

DOOR W/L

Ignition switch 
ON

Door warning lamp ON

On

Door warning lamp OFF

Off

HI-BEAM IND

Ignition switch 
ON

High beam indicator lamp ON

On

High beam indicator lamp OFF

Off

TURN IND

Ignition switch 
ON

Turn signal indicator lamp ON

On

Turn signal indicator lamp OFF

Off

FR FOG IND

Ignition switch 
ON

Front fog lamp indicator lamp ON

On

Front fog lamp indicator lamp OFF

Off

LIGHT IND

Ignition switch 
ON

Position lamp indicator lamp ON

On

Position lamp indicator lamp OFF

Off

OIL W/L

Ignition switch 
ON

Engine oil pressure warning lamp ON

On

Engine oil pressure warning lamp OFF

Off

MIL

Ignition switch 
ON

Malfunction indicator lamp ON

On

Malfunction indicator lamp OFF

Off

CRUISE IND

Ignition switch 
ON

CRUISE indicator lamp ON

On

CRUISE indicator lamp OFF

Off

SPORT IND

Ignition switch 
ON

SPORT indicator lamp ON

On

SPORT indicator lamp OFF

Off

FUEL W/L

Ignition switch 
ON

Low fuel warning lamp ON

On

Low fuel warning lamp OFF

Off

MWI

COMBINATION METER

MWI-21

< ECU DIAGNOSIS INFORMATION >

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

KEY G/Y W/L

Ignition switch 
ON

During Intelligent Key system malfunction in-
dication

On

Other than the above

Off

KEY KNOB W/L

Ignition switch 
ON

Shift P warning lamp ON

On

Shift P warning lamp OFF

Off

EPS W/L

Ignition switch 
ON

EPS warning lamp ON

On

EPS warning lamp OFF

Off

ECO MODE IND

Ignition switch 
ON

ECO mode indicator ON

On

ECO mode indicator OFF

Off

LCD

Ignition switch 
LOCK or ACC

Engine start operation indicator lamp ON 
(CVT models)

B&P N

Ignition switch 
ON

Engine start operation indicator lamp ON 
(CVT models)

B&P I

Ignition switch 
LOCK or ACC

Engine start operation indicator lamp ON (M/
T models)

C&P N

Ignition switch 
ON

Engine start operation indicator lamp ON (M/
T models)

C&P I

Ignition switch 
LOCK

During shift P warning lamp indication

SFT P

Ignition switch 
LOCK

During Intelligent Key low battery warning in-
dication

BATT

Ignition switch 
ON

During take away warning indication

NO KY

Ignition switch 
ON

During ACC warning indication

LK WN

SHIFT IND

Ignition switch 
ON

Shift position indicator P display

P

Shift position indicator R display

R

Shift position indicator N display

N

Shift position indicator D display

D

Shift position indicator L display

L

O/D OFF SW

Ignition switch 
ON

O/D OFF switch ON

On

O/D OFF switch OFF

Off

COMP F/B SIG

Ignition switch 
ON

A/C compressor activation condition

On

Other than the above

Off

PKB SW

Ignition switch 
ON

Parking brake switch ON 

On

Parking brake switch OFF

Off

BUCKLE SW

Ignition switch 
ON

Driver seat belt not fastened

On

Driver seat belt fastened

Off

BRAKE OIL SW

Ignition switch 
ON

Brake fluid level switch ON

On

Brake fluid level switch OFF

Off

A/C AMP CONN

Ignition switch 
ON

Receives A/C auto amp. connection recogni-
tion signal

On

Other than the following

Off

PASS BUCKLE SW

Ignition switch 
ON

Passenger seat belt not fastened

On

Passenger seat belt fastened

Off

DISTANCE
[mi or km]

Ignition switch 
ON

—

Distance to empty calculated by 
combination meter

Monitor Item

Condition

Value/Status