|
|
EVC-268 < DTC/CIRCUIT DIAGNOSIS > P3177 ECU ACTIVATION ERROR During this period, never perform vehicle handling such as opening and closing of doors. If some kind of vehicle handling is performed, then wait another 90 seconds or more from the time of the vehicle handling. 3. Connect normal charge connector (with AC power input) and wait at least 200 seconds. CAUTION: When performing the DTC Confirmation Procedure before Diagnosis Procedure, use the EVSE used at the occurrence of malfunction. 4. Check DTC. YES >> Proceed to EVC-269, "TYPE 3 : Diagnosis Procedure" . NO-1 (before performing diagnosis procedure)>>Proceed to EVC-269, "TYPE 3 : Diagnosis Procedure" NO-2 (after performing diagnosis procedure)>>INSPECTION END TYPE 1 INFOID:0000000010120728 1. CHECK DTC With CONSULT Check DTC. YES >> Check the DTC. Refer to NO >> GO TO 2. 2. CHECK SELF-DIAGNOSTIC RESULT IN TRACTION MOTOR INVERTER With CONSULT Check self-diagnostic result in “MOTOR”. YES >> Check the DTC. Refer to NO >> GO TO 3. 3. CHECK SELF-DIAGNOSTIC RESULT IN PDM (POWER DELIVERY MODULE) With CONSULT Check self-diagnostic result in “CHARGER/PD MODULE”. YES >> Check the DTC. Refer to . NO >> Check intermittent incident. Refer to GI-53, "Intermittent Incident" . TYPE 2 INFOID:0000000010120729 1. CHECK CONDITION Check and study the quick charger to see that it is within the specification. YES >> GO TO 2. NO >> Erase DTC. (Quick charger malfunction) 2. CHECK DTC With CONSULT Check DTC. YES >> Check the DTC. Refer to NO >> GO TO 3. 3. CHECK SELF-DIAGNOSTIC RESULT IN TRACTION MOTOR INVERTER With CONSULT Check self-diagnostic result in “MOTOR”. |