|
|
TAKE AWAY WARNING DOES NOT OPERATE DLK-143 < SYMPTOM DIAGNOSIS > C D E F G H I J L M A B DLK N O P TAKE AWAY WARNING DOES NOT OPERATE Diagnosis Procedure INFOID:0000000010119839 1. CHECK DTC WITH BCM AND COMBINATION METER Check that DTC is not detected with BCM and combination meter. YES >> GO TO 2. NO-1 >> Refer to NO-2 >> Refer to . (Combination meter) 2. CHECK COMBINATION METER BUZZER Check combination meter buzzer. DLK-107, "Component Function Check" Is the inspection result normal? YES >> GO TO 3. NO >> Repair or replace the malfunctioning parts. 3. CHECK INFORMATION DISPLAY Check information display. DLK-114, "Component Function Check" Is the inspection result normal? YES >> GO TO 4. NO >> Repair or replace the malfunctioning parts. 4. CHECK INTELLIGENT KEY WARNING BUZZER Check Intelligent Key warning buzzer. DLK-107, "Component Function Check" Is the inspection result normal? YES >> GO TO 5. NO >> Repair or replace the malfunctioning parts. 5. CHECK DOOR SWITCH Check door switch. DLK-102, "Component Function Check" Is the inspection result normal? YES >> GO TO 6. NO >> Repair or replace the malfunctioning parts. 6. CHECK INSIDE KEY ANTENNA Check inside key antenna. . • Rear seat: Refer to . • Luggage room: Refer to . Is the inspection result normal? YES >> GO TO 7. NO >> Repair or replace the malfunctioning parts. 7. REPLACE BCM 1. Replace BCM. Refer to BCS-72, "Removal and Installation" . 2. Confirm the operation after replacement. YES >> Inspection End. NO >> Check intermittent incident. Refer to GI-53, "Intermittent Incident" . |