Nissan Leaf. Manual - part 386

DIAGNOSIS SYSTEM (BCM)

DLK-39

< SYSTEM DESCRIPTION >

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)

INFOID:0000000010500888

SELF DIAGNOSTIC RESULT

Refer to 

BCS-48, "DTC Index"

.

DATA MONITOR

ACTIVE TEST

WORK SUPPORT

*: Initial setting

INTELLIGENT KEY
INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)

INFOID:0000000010500889

SELF DIAGNOSTIC RESULT

Refer to 

BCS-48, "DTC Index"

.

Monitor Item [Unit]

Description

REQ SW-DR [On/Off]

Indicates condition of door request switch LH.

REQ SW-AS [On/Off]

Indicates condition of door request switch RH.

REQ SW-BD/TR [On/Off]

Indicates condition of back door request switch.

DOOR SW-DR [On/Off]

Indicates condition of front door switch LH.

DOOR SW-AS [On/Off]

Indicates condition of front door switch RH.

DOOR SW-RR [On/Off]

Indicates condition of rear door switch RH.

DOOR SW-RL [On/Off]

Indicates condition of rear door switch LH.

DOOR SW-BK [On/Off]

Indicates condition of trunk switch.

CDL LOCK SW [On/Off]

Indicates condition of lock signal from door lock and unlock switch.

CDL UNLOCK SW [On/Off]

Indicates condition of unlock signal from door lock and unlock switch.

KEY CYL LK-SW [On/Off]

Indicates condition of lock signal from door key cylinder switch.

KEY CYL UN-SW [On/Off]

Indicates condition of unlock signal from door key cylinder switch.

Test Item

Description

DOOR LOCK

This test is able to check door lock operation [ALL LOCK/ALL UNLK/DR UNLK/AS UNLK/OTR 
ULK].

Support Item

Setting

Description

DOOR LOCK-UNLOCK SET

On*

Selective unlock function ON.

Off

Selective unlock function OFF.

AUTOMATIC LOCK/UNLOCK SE-
LECT

Lock/Unlock*

Automatic door lock and unlock functions ON.

Lock Only

Automatic door lock only function ON.

Unlock Only

Automatic door unlock only function ON.

Off

Automatic door lock function OFF.

AUTOMATIC DOOR LOCK SELECT

P RANGE

Doors lock automatically when shifted out of P (park).

VH SPD

Doors lock automatically when vehicle speed is greater than 24 km/h (15 mph).

AUTOMATIC DOOR UNLOCK SE-
LECT

MODE6

This mode is not used.

MODE5

This mode is not used.

MODE4

Driver door is unlocked automatically when shifted into P (park).

MODE3

Driver door is unlocked automatically when ignition is switched from ON to OFF.

MODE2

All doors unlock automatically when shifted into P (park).

MODE1*

All doors unlock automatically when ignition is switched from ON to OFF.

DLK-40

< SYSTEM DESCRIPTION >

DIAGNOSIS SYSTEM (BCM)

DATA MONITOR

ACTIVE TEST

Monitor Item [Unit]

Main

Description

REQ SW -DR [On/Off]

×

Indicates condition of door request switch LH.

REQ SW -AS [On/Off]

×

Indicates condition of door request switch RH.

REQ SW -BD/TR [On/Off]

×

Indicates condition of back door request switch.

PUSH SW [On/Off]

Indicates condition of power switch.

BRAKE SW 1 [On/Off]

×

Indicates condition of brake switch.

BRAKE SW 2 [On/Off]

Indicates condition of brake switch.

DETE/CANCL SW [On/Off]

×

Indicates condition of P (park) position.

SFT PN/N SW [On/Off]

×

Indicates condition of P (park) or N (neutral) position.

UNLK SEN -DR [On/Off]

×

Indicates condition of door unlock sensor.

PUSH SW -IPDM [On/Off]

Indicates condition of power switch received from IPDM E/R on CAN commu-
nication line.

IGN RLY1 -F/B [On/Off]

Indicates condition of ignition relay 1 received from IPDM E/R on CAN commu-
nication line.

DETE SW -IPDM [On/Off]

Indicates condition of detent switch received from TCM on CAN communication 
line.

SFT P -MET [On/Off]

Indicates condition of P (park) position from TCM on CAN communication line.

SFT N -MET [On/Off]

Indicates condition of N (neutral) position from IPDM E/R on CAN communica-
tion line.

ENGINE STATE [Stop/Start/Crank/Run]

×

Indicates condition of engine state from ECM on CAN communication line.

VEH SPEED 1 [mph/km/h]

×

Indicates condition of vehicle speed signal received from ABS on CAN commu-
nication line.

VEH SPEED 2 [mph/km/h]

×

Indicates condition of vehicle speed signal received from combination meter on 
CAN communication line.

DOOR STAT -DR [LOCK/READY/UNLK]

×

Indicates condition of driver side door status.

DOOR STAT -AS [LOCK/READY/UNLK]

×

Indicates condition of passenger side door status.

ID OK FLAG [Set/Reset]

Indicates condition of Intelligent Key ID.

PRMT ENG STRT [Set/Reset]

Indicates condition of engine start possibility.

RKE OPE COUN1 [0-19]

×

When remote keyless entry receiver receives the signal transmitted while oper-
ating the Intelligent Key, the numerical value starts changing.

RKE-LOCK [On/Off]

Indicates condition of lock signal from Intelligent Key.

RKE-UNLOCK [On/Off]

Indicates condition of unlock signal from Intelligent Key.

RKE-PANIC [On/Off]

Indicates condition of panic signal from Intelligent Key.

RKE-MODE CHG [On/Off]

Indicates condition of mode change signal from Intelligent Key.

Test Item

Description

INSIDE BUZZER

This test is able to check combination meter warning chime operation [Off/Take Out/Knob/
Key].

DIAGNOSIS SYSTEM (BCM)

DLK-41

< SYSTEM DESCRIPTION >

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

WORK SUPPORT

LCD

B&P N

This test is able to check combination meter traction motor start information.

B&P I

ID NG

This test is able to check combination meter key ID warning information.

ROTAT

This item is displayed, but is not used.

SFT P

INSRT

BATT

This test is able to check combination meter Intelligent Key low battery warning 
information.

NO KY

This item is displayed, but is not used.

OUTKEY

This test is able to check combination meter take away warning information.

LK WN

This test is able to check combination meter OFF position warning information.

Off

—

BATTERY SAVER

This test is able to check interior room lamp battery saver operation [Off/On].

ENGINE SW ILLUMI

This test is able to check power switch illumination operation [Off/On].

PUSH SWITCH INDICATOR

This test is able to check power switch ACC/ON indicator operation [Off/On].

TRUNK/BACK DOOR

This test is able to check back door opener actuator operation [Open].

INT LAMP

This test is able to check interior room lamp operation [Off/On].

INDICATOR

This test is able to check combination meter warning lamp operation [Off/KEY ON/KEY IND].

FLASHER

This test is able to check security hazard lamp operation [RH/LH/Off].

OUTSIDE BUZZER

This test is able to check Intelligent Key warning buzzer operation [On/Off].

HORN

This test is able to check horn operation [On].

Test Item

Description

Support Item

Setting

Description

LOCK/UNLOCK BY I-KEY

On*

Door lock/unlock function from request switch ON. 

Off

Door lock/unlock function from request switch OFF. 

ANTI KEY LOCK IN-FUNCTI

On*

Key reminder function ON. 

Off

Key reminder function OFF. 

ANS BACK I-KEY UNLOCK

On*

Buzzer reminder function when doors are unlocked with request 
switch ON.

Off

Buzzer reminder function when doors are unlocked with request 
switch OFF.

ANS BACK I-KEY LOCK

Horn Chirp

Horn chirp reminder function when doors are locked with request 
switch.

Buzzer*

Buzzer reminder function when doors are locked with request switch.

Off

No reminder function when doors are locked with request switch.

HORN WITH KEYLESS LOCK

On*

Horn reminder function when doors are locked with Intelligent Key 
ON.

Off

Horn reminder function when doors are locked with Intelligent Key 
OFF.

HAZARD ANSWER BACK

Lock/Unlock*

Horn reminder function when doors are locked or unlocked with re-
quest switch or Intelligent Key.

Unlock Only

Horn reminder function when doors are unlocked with request switch 
or Intelligent Key.

Lock Only

Horn reminder function when doors are locked with request switch or 
Intelligent Key.

Off

Horn reminder function when doors are locked or unlocked with re-
quest switch or Intelligent Key OFF.

DLK-42

< SYSTEM DESCRIPTION >

DIAGNOSIS SYSTEM (BCM)

*: Initial Setting

TRUNK
TRUNK : CONSULT Function (BCM - TRUNK)

INFOID:0000000010500890

DATA MONITOR

INSIDE ANT DIAGNOSIS

—

This function allows inside key antenna self-diagnosis.

CONFIRM KEY FOB ID

MEMORY 1

Intelligent Key ID code can be checked.

MEMORY 2

MEMORY 3

MEMORY 4

NON REGIST

PANIC ALARM SET

MODE 3

1.5 sec.

Panic alarm button set time on Intelligent Key can be set. 

MODE 2

OFF

MODE 1*

0.5 sec.

AUTO LOCK SET

MODE7

5 min.

Auto door lock time can be set.

MODE6

4 min.

MODE5

3 min.

MODE4

2 min.

MODE3*

1 min.

MODE2

30 sec.

MODE1

OFF

Support Item

Setting

Description

Monitor Item [Unit]

Description

PUSH SW [On/Off]

Indicates condition of power switch.

UNLK SEN -DR [On/Off]

Indicates condition of door unlock sensor.

VEH SPEED 1 [km/h]

Indicates vehicle speed signal received from ABS on CAN communication line.

TR/BD OPEN SW [On/Off]

Indicates condition of back door opener switch.