SB-4
FRONT SEAT BELT
FRONT SEAT BELT
PFP:86880
Removal and Installation
EHS000SK
NOTE:
Remove components in the order shown in the illustration above.
NOTE:
Slide the seat all the way forward and tilt the back of the seat toward the front for easier access.
1.
Remove buckle. For driver side, disconnect seat belt switch connector.
2.
Remove floor anchor bolts.
3.
Remove adjuster cover and upper guide loop anchor bolt.
4.
Remove center pillar lower and upper garnishes. Refer to
EI-18, "SIDE AND FLOOR TRIM"
.
5.
Remove two adjuster bolts and adjuster assembly.
6.
Remove retractor anchor bolt and screw.
7.
Remove retractor.
WRS230