|
|
GW-40 REAR VIEW MIRROR REAR VIEW MIRROR PFP:96321 Removal EIS002D7 Remove rear view mirror by deflecting spring with screwdriver as shown in the figure. Installation EIS002D8 1. Install mounting bracket as follows: a. Determine mounting bracket position on windshield by measur- b. Mark location on outside of windshield with wax pencil or equiv- c. Clean attaching point on inside of windshield with an alcohol- d. Sand bonding surface of mounting bracket with sandpaper (No. e. Clean bonding surface of mounting bracket with an alcohol-satu- f. Apply Loctite Adhesive 11067-2 or equivalent to bonding surface of mounting bracket. g. Install mounting bracket at premarked position and press mounting bracket against glass for 30 to 60 sec- h. After five minutes, wipe off excess adhesive with an alcohol-moistened paper towel. 2. Install rear view mirror. ABT188 ABF150 |