|
|
DTC P0452 EVAP CONTROL SYSTEM PRESSURE SENSOR EC-935 [VG33E] C D E F G H I J K L M A EC 4. Select “DATA MONITOR” mode with CONSULT-II. 5. Make sure that “FUEL T/TMP SE” is more than 0 °C (32°F). 6. Start engine and wait at least 20 seconds. 7. If 1st trip DTC is detected, go to EC-937, "Diagnostic Procedure" . WITH GST 1. Start engine and warm it up to normal operating temperature. 2. Check that voltage between ECM terminal 60 (Fuel tank temperature sensor signal) and ground is less 3. Turn ignition switch OFF and wait at least 10 seconds. 4. Start engine and wait at least 20 seconds. 5. Select MODE 7 with GST. EC-937, "Diagnostic Procedure" . SEF194Y |